Pump Parts and Accessories
AVANTOR MASTERFLEX (VWR LLC) Masterflex Doppler Ultrasonic Transducer for 1"" and Larger Pipe
Use these doppler flowmeters measure the flow of liquids in pipes from 1/4" and larger. Each flowmeter requires a transducer (32615-66 or -68) and a monitor (32615-60, -62, or -64).|The transducers send flow data via RG59 coax cable to the monitor, and the monitor¿s software automatically adjusts filtering parameters and gain settings to ensure reliable readings are ensured over a wide range of liquid and reflector conditions. Easily configure the monitor using the front panel keypad. A two-line backlit LCD displays rate and accumulated flow values in user selected measuring units. Models 32615-62 and -64 have a 4 to 20 mA input and output for datalogging or recording. A 4 to 20 mA input must be supplied for a 4 to 20 mA output. The monitor is housed in a NEMA 4X (IP-66) enclosure. The NEMA 6 (IP67) rating has the ability to work with temperatures up to 400¿F (200¿C).
ABclonal Technology IK Rabbit pAb
The protein encoded by this gene was identified by its RED repeat, a stretch of repeated arginine, glutamic acid and aspartic acid residues. The protein localizes to discrete dots within the nucleus, excluding the nucleolus. Its function is unknown. This gene maps to chromosome 5, however, a pseudogene may exist on chromosome 2.
Grainger Black Pipe Nipple Threaded 1/2x2-1/2 In
The 1/2" x 2-1/2" Black Pipe Nipple is a threaded pipe fitting made from malleable iron. It has National Pipe Thread ends and is 2-1/2" long. This nipple allows you to extend threaded pipe. It is rated for 300 psi working pressure and has a temperature range of -20°F to 300°F. The nipple has a black finish to resist corrosion. It conforms to ASME B16.3 and ASTM A197 standards. This threaded pipe fitting can be used in steam, water, air and oil applications.
BURKLE INC Thread adapter S61x6 DIN61)outer-S96x8(DIN96)inner,nat
This adapter is used when pumps need to be attached to containers such as drums or canisters with different thread standards.It is also suitable for laboratories, where experimental setups often require creative connections, as our adapters provide a secure and adaptable interface.
Perkin Elmer US LLC Magazine for Peristaltic Pump, One wide
We carry a wide selection of genuine supplies and accessories for your FIMS-100, FIMS-400, FIAS-100 or FIAS 400. Keeping your system in good working order by using only the best replacement parts is the first step in assuring quality analytical performance. Regular maintenance and/or replacement of consumables such as tubing, connectors and adapters will maximize the lifetime and productivity of your PerkinElmer flow injection system.
Cole-Parmer Vacuubrand 662511 Aluminum hose barb adapter, NW 16 to 10 mm
Adapters fit almost every kind of vacuum pump and accessory. Be sure to order clamps and co-seal or centering ring .
World Precision Instrument Affordable High Performance Peristaltic Pump-PERIPRO-8LS
Peri-Star Pro peristaltic pumps provide accurate and precise pumping with convenience and versatility. Peri-Star Pro can be run in either flow rate mode (mL/min) or rotation speed mode (rpm). For good laboratory practice, pumps must be calibrated after changing the tubing and solution. You can easily calibrate Peri-Star Pro to deliver flow as accurate as 0.5% in a wide flow range from 0.1 - 280 mL/min. Under rotation speed mode, the digitally controlled stepping motor provides accurate and reproducible operation with 0.1% rpm both forward and in reverse.
Grainger Black Pipe Nipple Threaded 1/2x3 In
The Grainger 14J781 is a 14-inch diameter, 7-blade, plastic fan blade suitable for ventilation fans. It has a pitch of 30 degrees and is constructed of injection molded thermoplastic. The blade measures 14 inches from tip to tip, with a 1 inch bore diameter and 1/2 inch keyway. It can be used as a replacement blade for ventilation fans up to 1 HP at 1075 RPM. The thermoplastic material offers corrosion resistance.
Grainger Black Pipe Nipple Threaded 2x2-1/2 In
The Black Pipe Nipple Threaded 2x2 1/2 In is a 2 inch long black steel pipe nipple with National Pipe Thread (NPT) on both ends. It has a 2 inch nominal pipe size (NPS) and is made from ASTM A53 Grade B ERW steel. This nipple allows you to connect and extend black steel pipes. It is zinc coated for corrosion resistance. The working pressure is 850 psi and temperature range is -20 to 450°F. It meets ASME B16.3 specifications. This threaded nipple provides a strong and durable threaded pipe connection.
Thomas Scientific MiniVac 1L Polystyrene Bottle; includes Transfer Cap
Simple, safe, cost effective laboratory waste removal system The Argos MiniVac waste collection system was designed with safety, convenience and bench-top space in mind. The MiniVac system replaces the need for glass waste containers; eliminating the risk of breakage and contamination. The MiniVac flask and cap sit in a safety reservoir basin thatcollects liquid should flask overflow, crack or leak. Full flasks can be transferred safely by using supplied transfer cap. Small footprint (7.5 in.); easy clean up with 70% isopropyl alcohol. The system includes a disposable 1L polystyrene flask, plastic reservoir basin, polypropylene cap with barbed fittings and tubing. Clear PETG plastic safety reservoir collects liquid in case flask cracks or leaks Use as stand-alone waste collection system or overflow vessel Polypropylene barbed cap fittings eliminate risk of broken glass rod fittings Use with in-house vacuum