Vacuum Tubing
Accuflow Systems Saint-Gobain Tygon Tubing, PVC, 1/8 In ID, 50 Ft
Saint-Gobain Tygon Power F-4040-A tubing is a flexible, fuel- and lubricant-resistant PVC tubing formulated to resist swelling and embrittlement from hydrocarbon-based fluids. Its translucent yellow construction allows visual monitoring of flow while providing UV and ozone resistance and easy routing for small engines, automotive, and equipment fluid-transfer applications.
- Fuel- and lubricant-resistant special PVC formulation
- 1/8 in inside diameter, 1/4 in outside diameter, 1/16 in wall
- 50 ft pre-cut length for inventory convenience
- Maximum working pressure 50 psi at 73°F
- Translucent yellow for fluid visibility and identification
- Resists swelling, hardening, and embrittlement from hydrocarbons
- Operating temperature up to 165°F (74°C), brittle to -35°F (-37°C)
- Highly flexible for tight-routing and easy installation
Accuflow Systems Saint-Gobain PharMed BPT Tubing, 3/4 In ID, 1 In OD
PharMed BPT tubing is a biocompatible thermoplastic peristaltic pump tubing formulated for sensitive bioprocess applications that require extended flex life, low permeability, and broad chemical resistance. It is suitable for cell harvest, media transfer, bioreactor lines, diagnostics, and aseptic filling.
- 3/4 in ID x 1 in OD, 1/8 in (3.2 mm) wall
- 25 ft (7.6 m) package length
- Opaque cream color
- Meets USP <88> Class VI, USP <87>, and ISO 10993-5 biocompatibility
- Maximum service temperature 275 °F (135 °C); low temperature embrittlement -75 °F (-59 °C)
- Autoclavable (30 min at 121 °C) and withstands up to 50 kGy gamma radiation
- Superior flex life compared with silicone; lower gas and vapor permeability
- Very good general chemical resistance; excellent acid, alkali, and oxidation resistance
- Recommended for peristaltic pump applications and shear-sensitive fluid transfer
Accuflow Systems Saint-Gobain Silicone Tubing, 0.125 in ID, 0.062 in Wall
Platinum-cured, ultra-pure silicone tubing with a 0.125 in inner diameter and 0.062 in wall thickness suitable for biopharmaceutical and laboratory fluid transfer.
- Platinum-cured silicone
- Inner diameter: 0.125 in (3.18 mm)
- Wall thickness: 0.062 in (1.57 mm)
- Outer diameter: 0.25 in (6.35 mm)
- Shore A hardness options: 50 or 65
- Sterilization: Autoclavable and gamma stable
- Compliance: Meets USP Class VI and European Pharmacopoeia 3.1.9
- Common packaging: 15 m roll; also available in 25, 50, and 100 ft coils
Accuflow Systems Saint-Gobain PharMed BPT Tubing, 1/16 in ID, 1/8 in OD
Saint-Gobain PharMed BPT peristaltic pump tubing provides a biocompatible fluid-contact surface, extended pump life compared with silicone, and resistance to common sterilization methods suitable for bioprocessing and laboratory fluid transfer.
- Formulated thermoplastic elastomer for peristaltic pumping.
- Dimensions: 1/16 in ID, 1/8 in OD, 1/32 in wall, 25 ft length.
- Opaque cream color to protect light-sensitive fluids.
- Meets USP Class VI and ISO 10993-5 biocompatibility requirements.
- Sterilization: autoclavable (30 min at 121 °C), tolerant to 50 kGy gamma radiation.
- Maximum service temperature 275 °F (135 °C); low temperature embrittlement at -75 °F (-59 °C).
- Max working pressure 24 psi at 73 °F, 14 psi at 180 °F; vacuum rating 29.9 in Hg.
- Typical uses: cell harvest, bioreactor lines, aseptic filling, filtration, and diagnostics.
Accuflow Systems Saint-Gobain Tygon Tubing, B-44-3 PVC, 1/8 in, 50 ft
Tygon B-44-3 tubing from Saint-Gobain is a clear, flexible beverage-grade PVC tubing formulated for food and beverage transfer and dispensing. It provides glass-like transparency for visual monitoring, broad chemical resistance, and non-wetting properties for easy cleaning and complete drainage. Available in 1/8 in inside diameter with a 50 ft coil, the tubing is suitable for soft drinks, fruit juices, flavored teas, and bottled water.
- Clear as glass for easy visual monitoring of flow.
- 1/8 in inside diameter, 3/16 in outside diameter.
- 50 ft coil length for extended runs.
- PVC formulation, Shore A hardness 66.
- Maximum operating pressure 34 psi at 73°F (2.3 bar at 23°C).
- Temperature rating up to 165°F (74°C); brittle below -32°F (-36°C).
- Vacuum rating 25 in Hg at 73°F (635 mm at 23°C).
- Contains no BPA or phthalates.
Accuflow Systems Saint-Gobain Tygon Tubing, Fuel and Lubricant, 3/8 in, 50 ft
Tygon F-4040-A fuel and lubricant tubing from Saint-Gobain is a flexible, hydrocarbon-resistant tubing formulation designed for small engine fuel lines and lubricant transfer. The tubing resists swelling and hardening caused by fuels and industrial lubricants, remains flexible at low temperatures, and is translucent yellow for visual identification and flow monitoring.
- 3/8 in inside diameter, 1/2 in outside diameter, 1/16 in wall thickness.
- 50 ft package length for bulk installations.
- Translucent yellow for positive identification and flow monitoring.
- Formulation resists swelling and hardening from hydrocarbon exposure.
- Hardness approximately 57 Shore A for flexible performance.
- Maximum recommended operating temperature 165 °F (74 °C); brittleness by impact -35 °F (-37 °C).
- Minimum bend radius 1-7/8 in; working pressure 20 psi at 73 °F; vacuum rating 10.0 inHg at 73 °F.
Accuflow Systems Saint-Gobain Tygon Tubing, 3/16 in ID, 50 ft
Tygon E-3603 tubing is a crystal-clear, flexible thermoplastic tubing designed for reliable fluid transfer and visual inspection in medical, diagnostic, and laboratory instruments. Its high dimensional tolerance and resistance to flex-fatigue support consistent flow and minimize carryover.
- Crystal-clear, flexible thermoplastic tubing suitable for laboratory and medical applications.
- Inner diameter 3/16 in, outer diameter 5/16 in, wall thickness 1/16 in.
- 50 ft package length for extended runs and installations.
- High dimensional tolerance and resistance to flex-fatigue for consistent fluid transfer.
- Glassy-smooth inner bore reduces buildup and carryover.
- BPA- and phthalate-free, low extractables formulation.
Accuflow Systems Saint-Gobain Tygon ND 100-80 Tubing, 0.03 in ID, 500 ft
Tygon ND 100-80 is a thermoplastic microbore tubing formulated for medical and analytical fluid transfer where small diameters and thin walls are required. It meets USP <88> Class VI biological test criteria for fluid path applications and is designed to provide higher pressure resistance at microbore dimensions.
- Microbore inner diameter 0.03 in, outer diameter 0.09 in, wall thickness 0.03 in.
- Supplied in 500 ft coils for extended runs and instrument use.
- Thermoplastic formulation offering higher durometer for improved pressure resistance.
- Suitable for drug delivery, cannulas, external drainage, and diagnostic equipment.
- Meets biological test requirements for fluid path applications (USP <88> Class VI).
Accuflow Systems Saint-Gobain Tubing, PharMed BPT, 3/16 in ID, 25 ft
Saint-Gobain PharMed BPT tubing is a high-performance peristaltic pump tubing formulated for biocompatible fluid transfer in pharmaceutical, biotechnology, and diagnostic processes. It is engineered to withstand repeated peristaltic pumping, minimize particulate generation, and protect shear-sensitive fluids during transfer and processing.
- 3/16 in ID, 5/16 in OD, 1/16 in wall, 25 ft length.
- Proprietary peristaltic-grade formulation, opaque cream appearance.
- Meets USP <88> Class VI and ISO 10993-5 biocompatibility testing.
- Maximum service temperature 275°F (135°C); low temperature embrittlement -75°F (-59°C).
- Very good general chemical resistance; excellent resistance to acids, alkalis, and oxidizers.
- Compatible with repeated autoclaving and gamma irradiation up to 50 kGy.
- Suitable for cell harvest, bioreactor process lines, aseptic filling, and shear-sensitive fluid transfer.
Accuflow Systems Saint-Gobain Tygon Tubing, E-3603 Formulation, 7/16 In ID, 50 Ft
Tygon S3 E-3603 tubing is a clear, flexible laboratory tubing formulated for peristaltic and vacuum applications, analytical instruments, and general fluid transfer. It resists flex-fatigue and abrasion, is non-oxidizing and non-contaminating, and contains no BPA or phthalates.
- Inside diameter: 7/16 in (11.1 mm)
- Outside diameter: 11/16 in (17.5 mm)
- Wall thickness: 1/8 in (3.2 mm)
- Length: 50 ft (15.2 m)
- Minimum bend radius: 1 3/8 in (34.9 mm)
- Maximum recommended operating temperature: 165°F (74°C)
- Maximum working pressure: 22 psi (1.5 bar) at 73°F (23°C)
- Vacuum performance: withstands full vacuum at room temperature
- Chemical compatibility: excellent with salts and many acids; poor with ketones and hydrocarbons