Vacuum Tubing
Accuflow Systems Saint-Gobain Versilon Tubing, SE-200, FEP Liner, 3/16 in ID
Versilon SE-200 tubing is an FEP-lined, thermoplastic elastomer flexible tubing designed for chemical transfer and fluid handling. The FEP inner liner provides inertness and broad chemical compatibility while the elastomer outer delivers flexibility and an outstanding bend radius. This configuration is 3/16 in (4.76 mm) ID x 5/16 in (7.94 mm) OD, 0.063 in (1.59 mm) wall, and 50 ft length.
- FEP inner liner provides broad chemical compatibility and inertness.
- Thermoplastic elastomer outer for flexibility and resistance to kinking.
- 3/16 in ID, 5/16 in OD, 0.063 in wall, 50 ft length.
- Crystal clear for visual monitoring of fluids.
- Phthalate-free and free of BPA.
- Suitable for chemical processing, solvent and adhesive transfer, and semiconductor applications.
Accuflow Systems Saint-Gobain Thermoplastic Tubing, High-Purity, 3/4 in ID, 1 in OD
Tygon 2475 tubing is a crystal-clear, plasticizer-free thermoplastic designed for medical, diagnostic, and laboratory fluid transfer where low extractables, chemical resistance, and biocompatibility are required. It minimizes contamination risk and offers low gas permeation compared with silicone, making it suitable for reagent delivery, analyzer waste lines, cell and tissue transport, and other clean fluid-handling applications.
- High-purity, plasticizer-free thermoplastic formulation.
- Clear, crystal transparency for visual inspection of flow and bubbles.
- Resists aggressive acids, bases, and common solvents.
- Meets USP Class VI biocompatibility standards.
- ID/OD available up to 1 in ID and 1-3/8 in OD; common size 3/4 in ID, 1 in OD.
- Wall thickness range from 1/16 in to 3/16 in.
- Low brittleness point (reported -108°F / -78°C); full operating range not specified.
Accuflow Systems Saint-Gobain PharMed BPT Tubing, 1/8 in ID, 3/16 in OD
PharMed BPT tubing is a biocompatible peristaltic pump tubing formulated for sensitive bioprocess and laboratory fluid transfer. This configuration has a 1/8 in inner diameter, 3/16 in outer diameter, and 1/32 in wall thickness, supplied in a standard 25 ft coil. The tubing provides extended flex life for peristaltic pumps, low extractables, and broad chemical compatibility for media processing, cell culture, and diagnostic workflows.
- Biocompatible fluid contact surface, meets USP Class VI and ISO 10993-5 testing.
- Formulated for peristaltic pumping with extended flex life and reduced downtime.
- Temperature resistant from -59 °C to 135 °C for autoclave and hot-fluid applications.
- Good chemical resistance to acids, alkalis, and oxidizers; compatible with common cleaners.
- Minimizes particulate and extractables for sensitive bioprocessing workflows.
- Standard coil length 25 ft for convenient installation and replacement.
Accuflow Systems Saint-Gobain Tygon S3 Tubing, 5/32 in ID, 50 ft
Saint-Gobain Tygon S3 E-3603 tubing is a clear, flexible thermoplastic elastomer designed for laboratory and vacuum fluid transfer applications. The formulation resists flex-fatigue and abrasion, features a glassy smooth inner bore to reduce buildup, and contains no intentionally added phthalates or BPA. This size is 5/32 in ID x 9/32 in OD with a 1/16 in wall and is supplied in 50 ft lengths marked at 1 ft intervals for easy measuring.
- Crystal clear thermoplastic elastomer construction.
- 5/32 in internal diameter x 9/32 in outside diameter, 1/16 in wall.
- 50 ft package length, marked at 1 ft intervals for measuring.
- Withstands full vacuum at room temperature (29.9 in Hg).
- Maximum recommended operating temperature 165°F (74°C).
- Resistant to flex-fatigue and abrasion for extended service life.
- Phthalate-free formulation; no BPA intentionally added.
Accuflow Systems Saint-Gobain Versilon 2001 Tubing, Plasticizer-Free, 1/4 in ID, 50 ft
Versilon 2001 tubing is a plasticizer-free, chemical-resistant thermoplastic elastomer tubing designed for pump and fluid-transfer applications requiring clear visual flow monitoring and suitability for food-contact use where low extractables are important.
- Plasticizer and oil free for low extractables and reduced leachables.
- Clear tubing permits visual inspection of flow.
- Inner diameter 1/4 in, outer diameter 3/8 in, wall thickness 1/16 in.
- 50 ft length for continuous runs or cut-to-length installation.
- Chemical resistant to a wide range of fluids.
- Meets FDA 21 CFR 177.2600 for food contact suitability.
- Flexible for use with peristaltic and other pump types.
Accuflow Systems Saint-Gobain Tygon Tubing, PVC, 1/4 in ID, 3/8 in OD
Tygon S3 B-44-3 is a clear, flexible beverage-grade tubing engineered for food and beverage transfer and dispensing. It resists taste and odor transfer, offers excellent non-wetting properties for complete drainage, and is compatible with common sanitizing agents.
- Clear, flexible PVC construction with no BPA or phthalates.
- 1/4 in inside diameter, 3/8 in outside diameter, 1/16 in wall thickness.
- Typically supplied on 50 ft rolls for easy installation.
- Maximum working pressure 34 psi at 73°F (2.3 bar at 23°C).
- Shore A hardness 66 for flexible, kink-resistant performance.
- Glass-like clarity allows visual flow monitoring.
- Complies with FDA food additive regulations, NSF-51, NSF-61, 3-A, EU 1935/2004, and REACH.
Accuflow Systems Saint-Gobain Tygon Tubing, PVC, 1/4 in ID, 50 ft
Flexible, extra-heavy-wall thermoplastic tubing designed for laboratory and diagnostic fluid transfer and vacuum applications. The tubing provides vacuum integrity, clear visual inspection, and a non-contaminating, phthalate-free formulation suitable for sensitive applications.
- Extra-heavy-wall thermoplastic tubing for vacuum integrity and flex resistance.
- Clear, non-oxidizing, non-contaminating formulation for visual inspection.
- 1/4 in inner diameter, 1/2 in outer diameter, 1/8 in wall thickness, 50 ft length.
- Withstands full vacuum at room temperature (29.9 inHg / 760 mmHg).
- Maximum recommended operating temperature 165 °F (74 °C); brittle temperature -51 °F (-46 °C).
- Phthalate-free and BPA-free formulation to minimize contamination risk.
- Suitable for laboratory, medical, diagnostic, and general fluid-handling applications.
Accuflow Systems Saint-Gobain Tygon Microbore Tubing, 0.04 in ID, 500 ft
Tygon ND 100-80 microbore tubing is a non-DEHP thermoplastic tubing formulated for medical and diagnostic fluid transfer. It provides clear construction for visualization, high durometer for pressure resistance at small diameters, and good kink resistance to maintain reliable flow in microbore applications.
- Inner diameter 0.04 in (1.02 mm).
- Outer diameter 0.07 in (1.78 mm).
- Wall thickness 0.015 in (0.38 mm).
- Supplied on 500 ft (152 m) spools.
- Non-DEHP thermoplastic formulation suitable for fluid-contact medical applications.
- Clear for easy visualization of fluid flow.
- Meets USP <88> Class VI biological testing for fluid path applications.
- Common applications: drug delivery, cannulas or protective sheaths, external drainage, diagnostic equipment, pressurized fluid transfer.
Accuflow Systems Saint-Gobain Tygon Laboratory Tubing, Phthalate-Free, 1/4 in I.D., 50 ft
Saint-Gobain Tygon S3 E-3603 is a phthalate-free, bio-based, clear flexible laboratory tubing formulated for chemical compatibility, visual inspection, and vacuum-capable fluid transfer. Typical sold configuration for the referenced SKU is 1/4 in inside diameter (≈6.35 mm), 5/16 in outside diameter (≈7.94 mm), 0.03 in wall (≈0.79 mm), supplied in 50 ft coils. The formulation provides a smooth inner bore, lot-to-lot consistency, and regulatory compliance for laboratory and food-contact applications.
- Phthalate-free, bio-based plasticizer formulation.
- Smooth, polished inner wall to help prevent buildup.
- Suitable for vacuum and peristaltic pump applications.
- Non-toxic and non-contaminating; contains no BPA or phthalates.
- Meets USP Class VI, (EU) 10/2011, (EC) 1935/2004, and FDA food-contact criteria.
- Fully autoclavable and sterilizable.
- Standard sizes available to hold full vacuum at room temperature.
IMEB, Inc 10 Disposable Hoses with Filters for Histo-Vacuum System, Histo-Vacuum Sold Separately
10 disposable vacuum hoses with filters for Histo-vacuum. Histo-vacuum sold separately.
Grainger Bar Clamps
The Irwin Quick-Grip One-Handed Bar Clamp is a 36" reach bar clamp that can open up to 34". It has a patented One-Handed trigger release that allows quick clamping and spreading. The clamp has non-marring pads to protect work surfaces. This bar clamp can apply up to 150 lbs of clamping force and has a lightweight aluminum I-beam design. It's useful for woodworking, auto repair, welding, and other projects requiring clamping and spreading. The clamp's compact size makes storage easy.
Accuflow Systems STHT-C Tubing 50-foot, ID 0.250"" x OD 0.438"" x Wall 0.094"" is ultra-pure biopharmaceutical-grade silicone with unsurpassed surface smoothness. STHT-C is autoclavable and sterilizable, has a temperature range from 80F (-62C) to 500
Sani-Tech STHT-C is an ultra-pure biopharmaceutical-grade tubing. This platinum-cured silicone tubing resists temperature extremes, ozone, radiation, moisture, compression sets, weathering and chemical attack, and imparts no odors to fluids transported within it. Sani-Tech STHT-C silicone tubing is suitable for sterilization by gamma irradiation and steam. Sani-Tech STHT-C, in 1/16'' ID and greater, comes with laser-marked part numbers and lot codes to provide total product traceability. Meets USP Class VI, European Pharmacopoeia 3.1.9 and FDA criteria.
Accuflow Systems Versilon PTFE Tubing, 5/16 in I.D., 3/8 in OD
Versilon PTFE tubing is an unreinforced, smooth-bore polytetrafluoroethylene (PTFE) flexible tubing engineered for high-purity, chemically resistant fluid transfer. It offers a wide operating temperature range, excellent dielectric properties, and is packaged in 50 ft lengths for laboratory, pharmaceutical, and semiconductor processing applications.
- Chemically inert and ultra-pure PTFE construction.
- Internal diameter: 5/16 in (0.3125 in).
- Outer diameter: 3/8 in (0.375 in).
- Wall thickness: 0.031 in.
- Package length: 50 ft.
- Temperature range: -328 °F to 500 °F (-200 °C to 260 °C).
- Max working pressure: 113 psi at 73 °F; 41 psi at 212 °F.
- Smooth bore construction minimizes flow resistance.