Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing Microbore PTFE, 0.042"" ID x 0.066"" OD; 100 ft/roll
Use this translucent tubing in extreme temperatures and in harsh chemical environments. It's chemically inert, has low permeability, and has the lowest friction coefficient of any tubing. Temperature range is ¿400 to 500¿F (¿240 to 260¿C); melts at 620¿F (327¿C). Tensile strength is 2500 to 4000 psi. PTFE tubing resin is UL-recognized and complies with FDA (21 CFR 177.1550) and USP Class VI requirements.
THERMO SCI 3P AIG PARTS & ACCESSORIES RINSING TUBE SILICONE 2.8X1.
501347612 RINSING TUBE SILICONE 2.8X1.
Braintree Scientific Polyethylene .034"""" x .060"""" Per Ft.,200 ft. Continuous
Polyethylene Tubing Polyethylene is a relatively rigid polymer suitable for short-term catheterizations and for ex vivo applications. Polyethylene sleeves can be slipped over less rigid catheter materials (MicroRenathane, RenaSil™) at suture points to protect the latter from inadvertent constriction **Sold for research purposes only and not for human use**
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Platinum-Cured Silicone, 3/4"" ID x 1"" OD; 25 ft
Applications: Pharmaceutical, biotechnology, aerospace, food and beverage, and general lab applications. Characteristics: Platinum-cured, excellent heat resistance, low compression set, odorless, nontoxic, translucent. Certification: Elastomer is FDA-compliant (21 CFR 177.2600) and meets USP Class VI; exceeds 3A Sanitary Standards. Tubing is manufactured according to GMP. Temperature range: -58 to 446¿F (-50 to 230¿C) Sterilize: Autoclave or gamma irradiation.
Accuflow Systems Saint-Gobain Tygon Tubing, Thermoplastic, 1-1/4 in ID, 50 ft
Tygon E-3603 is a clear, flexible thermoplastic tubing formulated for medical and diagnostic fluid handling applications that require visual inspection, chemical compatibility, and low extractables. It provides consistent dimensional tolerance and a smooth inner bore to minimize buildup and carryover in fluid transfer systems.
- Clear thermoplastic construction for visual fluid inspection.
- 1-1/4 in inner diameter, 1-5/8 in outer diameter, 3/16 in wall.
- 50 ft continuous length for system installation.
- Phthalate-free and BPA-free formulation.
- Biocompatible and non-contaminating; low extractables.
- Smooth inner surface reduces carryover and eases cleaning.
- High lot-to-lot consistency for repeatable performance.
- Suitable for IVD analyzers, medical instrumentation, and laboratory fluid transfer.
- Compliant with REACH and California Proposition 65.
AVANTOR MASTERFLEX (VWR LLC) Ismatec Microbore 2-Stop Tube Sets, Santoprene, 0.25 mm ID; Pack of 12
Compatible with Masterflex L/S Multichannel pump head, small cartridges
MSC Coilhose Pneumatics PE3103-500N 15/64" ID x 5/16" OD, 0.0383" Wall Thickness, Cut to Length (500' Standard Length) Polyethylene Tube Natural, 125 Max psi
Coilhose Pneumatics PE3103-500N 15/64" ID x 5/16" OD, 0.0383" Wall Thickness, Cut to Length (500' Standard Length) Polyethylene Tube Natural, 125 Max psi
MSC Coilhose Pneumatics NC0610-1000N 6mm OD, Cut to Length (1000' Standard Length) Nylon Tube Natural, 280 Max psi
Coilhose Pneumatics NC0610-1000N 6mm OD, Cut to Length (1000' Standard Length) Nylon Tube Natural, 280 Max psi