Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Accuflow Systems Saint-Gobain Tygon Tubing, Non-DEHP PVC, 1/4-in ID, 3/8-in OD
Tygon S3 E-3603 is a non-DEHP special PVC laboratory tubing formulated for resistance to flex-fatigue and abrasion. It features a glassy-smooth inner bore for easy visual inspection and cleaning, and is suitable for vacuum, instrumentation, and general laboratory fluid transfer applications.
- Non-DEHP special PVC formulation, no BPA or phthalates.
- Inner diameter: 1/4 in (6.4 mm).
- Outer diameter: 3/8 in (9.6 mm).
- Wall thickness: 1/16 in (1.6 mm).
- Length: 15 m.
- Maximum recommended operating temperature: 74 °C (165 °F).
- Vacuum rating: withstands full vacuum at 73 °F (29.9 in Hg) and up to 27 in Hg at 140 °F.
- Sterilization: compatible with autoclave (steam 30 min at 15 psi, 121 °C) and ethylene oxide.
Foxx Life Sciences Imaweld Heat Sealable and Weldable TPE Tube 9.5mm (3/8") ID X 15.87mm (5/8") OD, 25 FT
Imaweld is thermoplastic elastomer opaque tubing designed for fluid transfer in pharmaceutical and biotech applications. Imaweld is specially formulated which meets requirement of pharmaceutical industries with superiority compare to PVC and Silicone.• Free of any toxic ingredients. successfully meets toxicity free requirements.• Manufactured and Packaged in Clean Room Class of ISO 9001, ISO 14001 and OHSAS 18001 certified facility• Heat sealable and weldable to facilitate sterile connection• Working Temperature Range -40°C to +135°C• USP Class VI Certification• TSE/BSE CertificationAll standard dimensions are in mm and Inch dimensions are for reference only.
Ace Glass, Inc. ClearGreen; PVC tubing, 1in ID - 1-1/4in OD, Phthalate-Free, box/50 feet
25.4 X 3.2MM VINYL TUBING
Cole-Parmer LDPE Rectangular Mobile Tub with Lid, 28 gal; 1/Pk
Tubs are made of low-density polyethylene (LDPE). Rugged caster frame supports heavy loads. Three-inch diameter casters make rolling easy. Container and casters can be removed from zinc-plated frame for cleaning. Tubs include polyethylene cover. NSF certified; USDA approved.
AVANTOR MASTERFLEX (VWR LLC) Peroxide-Cured Silicone Tubing, 1/8""ID x 1/4""OD, 25 ft/pack
Peroxide-Cured Silicone Tubing, 1/8"ID x 1/4"OD, 25 ft/Pk, Applications: Pharmaceutical, biotechnology, food and beverage, aerospace, and general lab applications.Characteristics: Peroxide-cured, excellent heat resistance, low compression set, odorless, nontoxic, translucent.Certification: Elastomer is FDA-compliant (21 CFR 177.2600) and meets USP Class VI requirements. Tubing is manufactured according to GMP.Temperature range: ¿60 to 460¿F (¿51 to 238¿C)Sterilize: Autoclave or gamma irradiation.
Hach Company PFA TUBING 1/4 OD X 1/8 ID 1M
PFA tubing, 1/4 OD x 1/8 ID (6.35mm OD x 3.18mm ID)- 1 Meter
Waters Corp PTFE Tubing, 1/4 in O.D., 0.19 in I.D., 10 ft Length
Waters tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.
- Provides leak-free connections
- Features low dead volume
- Designed for minimal band spreading
- Components are clean and designed to work together for best performance
- Geometry of ferrule and conical port must match
- Diameter of tube and fittings must match
- Variety of materials, lengths, and diameters are available for system setup and maintenance
Perkin Elmer US LLC Sipper Tubing to Cuvette (in), Replacement Tubing
The Sipper Tubing to Cuvette is a teflon hose that connects from a Sipper accessory to the in-flow valve of a Flow-Through cell. With this part number, it can be ordered as a replacement or spare.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, C-Flex, Clear, 3/8"" ID x 5/8"" OD; 25 ft
Applications: Pharmaceutical, biotech, and general-purpose lab uses requiring high performance. Economical alternative to platinum silicone. Characteristics: Exceptional tensile and tear strength, good biocompatibility, excellent chemical resistance, low gas permeability, and a smooth surface. Transparent. Certification: Product is manufactured in accordance with Part 820 Quality System Requirements (GMP); and meets USP Class VI. Temperature range: -40 to 275¿F (-40 to 135¿C) Sterilize: Autoclave, ethylene oxide, or gamma irradiation.
Accuflow Systems TUBING MFLEX PHARMED #73 25FT
Manufactured by Cole Parmer and sold by Accuflow. Masterflex PharMed BPT Tubing, I/P #73, 25 ft. Applications: Cell and tissue culture work and pharmaceutical uses. Also good for light-sensitive samples. Characteristics: Nontoxic; nonhemolytic; extremely
AVANTOR MASTERFLEX (VWR LLC) Peroxide-Cured Silicone Tubing, Translucent, 1/4""ID x 1/2""OD, 25 ft/pack
Peroxide-Cured Silicone Tubing, 1/4"ID x 1/2"OD, 25 ft/PkApplications: Pharmaceutical, biotechnology, food and beverage, aerospace, and general lab applications.Characteristics: Peroxide-cured, excellent heat resistance, low compression set, odorless, nontoxic, translucent.Certification: Elastomer is FDA-compliant (21 CFR 177.2600) and meets USP Class VI requirements. Tubing is manufactured according to GMP.Temperature range: ¿60 to 460¿F (¿51 to 238¿C)Sterilize: Autoclave or gamma irradiation.