Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
AVANTOR MASTERFLEX (VWR LLC) 2-STP TYGN E-LAB 0.89MMID 12PK
Masterflex Ismatec Pump Tubing, 2-Stop, Tygon S3™ E-Lab, 0.89 mm ID; 12/PK, Avantor
Accuflow Systems Altafluor 400 PFA - available in coiled hose and convoluted tubing constructions - 400 PFA 1/2" X 5/8 "- 25 FT
Altafluor 400 PFA (Perfluoroalkoxy) is the product of choice for applications involveing extreme chemical resistance combined with high temperature. Altifluor 400 is made exclusively from 100% virgin grade high performance resin used to resist stress cracking. The highest molecular weight resins available giving it superior physical properties making it suitable for even the most demanding applications. Chemically inert to nearly all industrial chemicals and solvents. It has a higher thermal stability than FEP. is translucent in appearance. It is FDA compliant for food contact, FDA 21 CFR 177.1550. It meets the requirements of USP Class VI, is non-flammable and has a moisture absorption of nearly zero. Altafluor is compatible with flare of conventional fittings.
MSC Value Collection Sewer Hose, -40 to 160 °F, 4,400 psi, 1/4 Inch ID, Black
This sewer hose is designed for demanding high-pressure applications, offering reliable performance across a wide temperature range. It is suitable for various industrial and commercial uses requiring a robust and durable hose.
- Withstands temperatures from -40 to 160 °F.
- Handles maximum working pressure up to 4,400 psi.
- Features a 1/4 inch inside diameter.
- Comes in a black finish.
- Manufactured in Italy, ensuring quality construction.
- Supplied as a 100 foot roll.
Scientific Commodities Inc MEDICAL GRADE PTFE MICRO TUBING (Cat.# BB311-22-100′ Roll)
MEDICAL GRADE PTFE MICRO TUBINGThis medical grade PTFE micro size tubing absorbs practically no common acids, bases or solvents. Do not confuse this grade of tubing with general purpose, commercial & industrial grade PTFE tubing; although it can be used in those applications. It is manufactured with a low level of extractables and is chemically inert. It can be safely used from -410°F (-277°C) TO 500°F (260°C). This translucent 58 shore D tubing is USP class VI certified. It also meets military spec #MIL-L-22129, UL-224. Do not use with molten alkali metals, fluorine or strong fluorinating agents. It can easily be autoclaved or eto sterilized.SCI Cat.# BB311-22Gauge Size: 22Dimensions: I.D. x O.D.: 0.028″ x 0.048″ / 0.711mm x 1.22mm
Grainger InsulMultitapCon PVC 14 AWG 1/0 AWG
The Polaris Insulated Multitap Connector is an electrical connector that allows multiple wires to be connected to a single point. It is rated for 600 volts and can accommodate wire sizes from 14-10 AWG. The connector has 4 ports and is made from thermoplastic polyester with nickel-plated brass terminals. It is UL listed and CSA certified. The multitap is insulated to help prevent shorts and is ideal for splicing and extending circuits. This connector can be installed by stripping the wires, inserting them into the ports, and tightening the screws to secure the wires. It is manufactured by Polaris in the United States.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Polyimide, 0.0120"" ID x 0.0140"" OD, 12""L; 5/PK
The tubing is ideal for use as an electrical and thermal insulator, for fluid and gas delivery, or as a tough sheath for glass fibers. It offers excellent chemical, heat, radiation, and abrasion resistance and high dielectric strength. Resin meets USP Class VI requirements and NEMA standards. The tube has a temperature range of -418 to 896¿F (¿250 to 480¿C). Can be sterilized with autoclave, ethylene oxide or gamma irradiation.
Perkin Elmer US LLC 1.0 mm I.D. PTFE Tubing, Qty. 1 m
Other tubing with 0.35 mm - 1.75 mm I.D. available separately.
Hach Company Hach Flare Flow Cell Carrier Line, 35 cm - replacement carrier line for Lachat flow cell assemblies
The Hach Flare Flow Cell Carrier Line (35 cm) is a replacement carrier line used with flow cell assemblies in flow injection analysis equipment. It provides the specified 35 cm length carrier line for positioning a flow cell within the analysis path.
- 35 cm length.
- Flow cell carrier line for flow cell assemblies.
- Replacement part for flow injection analysis systems.
- Provides a consistent carrier length for repeatable positioning of the flow cell.
AVANTOR MASTERFLEX (VWR LLC) MSTRFLX TBNG 1.42MM ID 100FT
Masterflex Ismatec Pump Tubing, Tygon E-Lab, 1.42 mm ID; 100 ft, Avantor