Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Chemglass Life Sciences Chemglass Excelon PVC Laboratory Tubing, 1/4 in ID x 7/16 in OD, 50 ft Roll (Standard wall)
Chemglass Excelon PVC laboratory tubing is a clear, flexible, standard-wall tubing designed for reliable liquid and gas transfer in laboratory settings. It features a smooth inner bore to reduce buildup, compatibility with autoclaving and repeated gamma sterilization, and good flexibility and durability for routine use.
- 1/4 in inner diameter.
- 7/16 in outer diameter.
- 3/32 in wall thickness.
- 50 ft per roll.
- PVC material with Shore A hardness 55.
- Temperature range -58°F to 165°F.
- Meets FDA (CFR 21, Part 175.300).
- Smooth inner bore reduces buildup and simplifies cleaning.
MSC Made in USA TSFE14062506250 1/2" ID x 5/8" OD, 1/16" Wall Thickness, Cut to Length (50' Standard Length) PTFE Tube Translucent, 56 Hardness
Made in USA TSFE14062506250 1/2" ID x 5/8" OD, 1/16" Wall Thickness, Cut to Length (50' Standard Length) PTFE Tube Translucent, 56 Hardness
Grainger Corrugated Tubing Nylon 1/2 in 25 ft
The Corrugated Loom Tubing 1/2" is a flexible, corrugated tubing made of polyethylene that provides protection for wires and cables. It has an inside diameter of 1/2", is sold by the foot, and is available in black, gray, and yellow colors. The tubing features a spiral cut design for easy wire insertion and has excellent abrasion resistance. It can withstand temperatures from -20°F to 176°F and is designed for both indoor and outdoor applications including wire harnesses, cable bundles, and anywhere that requires protecting wires from dust, moisture and abrasion. This tubing meets military specification MIL-T-21038 and is made in the USA.
Accuflow Systems Altafluor 200 FEP (Fluoronated Ethylene Propylene) - 200 FEP, 5/16" X 3/8"- 25 FT
Altafluor 200 FEP (Fluoronated Ethylene Propylene) is an economical choice for applications requiring chemical resistance in combination with broad temperature exposure. Altafluor 200 FEP offers excellent clarity which makes it ideal for sight glass/flow monitoring applications. Certified to NSF 51, NSF 61 and NSF 372. It has superior electrical insulation properties and is available in coiled hose and convoluted tubing constructions. Additionally, the outstanding UV transmission rate of FEP makes it a clear choice for UV transmission applications. Altafluor 200 tubing may be used with flare or conventional fittings.
Accuflow Systems Cole Parmer - CFLEX TUBING..Weldable and sealable Thermoplastic Elastomer3/8 in.idx5/8 in.od x 150 ftspool
Cole Parmer - CFLEX TUBING..Weldable and sealable Thermoplastic Elastomer3/8 in.idx5/8 in.od x 150 ftspool. Shore A 60 durometer,made with animal free compounds, ClassVI approved
Hach Company Tubing, Nalgene 8000, Vacuum, 9.5 mm (I.D.)
Similar to Nalgene 8000 regular tubing, but with heavier walls. Imprinted in red for instant identification. Saves time and avoids errors which could invalidate experiments or injure laboratory personnel.
Braintree Scientific Polyethylene .023"""" x .038"""" Per Ft., 500 ft. Continuous
Polyethylene Tubing Polyethylene is a relatively rigid polymer suitable for short-term catheterizations and for ex vivo applications. Polyethylene sleeves can be slipped over less rigid catheter materials (MicroRenathane, RenaSil™) at suture points to protect the latter from inadvertent constriction **Sold for research purposes only and not for human use**
Research Products International Corp Autoclavable Plastic Tubing Dispenser, 12 Wide
Create custom size bags for hybridization procedures or for autoclaving individual items. Ultra-clear 2 ml polypropylene tubing allows full visibility of bag contents. Tubing can be sealed quickly using an electric bag sealer. Optional dispenser provides a convenient method for keeping tubing on a benchtop or can be wall mounted. Divider kit organizes various size rolls for convenient dispensing.
Research Products International Corp Autoclavable Plastic Tubing, 2 ml Thick, 2 Inches Wide x 1000 Feet
Create custom size bags for hybridization procedures or for autoclaving individual items. Ultra-clear 2 ml polypropylene tubing allows full visibility of bag contents. Tubing can be sealed quickly using an electric bag sealer. Optional dispenser provides a convenient method for keeping tubing on a benchtop or can be wall mounted. Divider kit organizes various size rolls for convenient dispensing.
