Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
AVANTOR MASTERFLEX (VWR LLC) Tygon Silicone Tubing, 3/16""ID x 3/8""OD, 50 ft/pack
Formulation: TYGON 3350 silicone, platinum cured. Applications: Pharmaceutical, cosmetic, industrial, and auto-analysis applications. Characteristics: Ultra-smooth inner surface reduces particle entrapment and minimizes bacterial growth. Good for mild to medium concentration bases, salts, and alcohols; is odorless, tasteless, and non-toxic. Transparent. Certification: Elastomer is FDA-compliant (21 CFR 177.2600); meets USP Class VI requirements, NSF criteria and EP 3.2.9 requirements. Tubing is manufactured according to GMP. Temperature range: ¿112 to 392¿F (¿80 to 200¿C) Sterilize: With ethylene oxide, gamma irradiation, or autoclave for 30 min, 15 psi.
AVANTOR MASTERFLEX (VWR LLC) TUBNG CHEMBIO 2 STP 13 25FT 8P
Masterflex L/S 2-Stop Precision Pump Tubing, Chem-Durance Bio, L/S 13; 8/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) TUBING C-FLEX 2.79MMID 50FT
Masterflex Ismatec Pump Tubing, C-Flex, 2.79 mm ID; 50 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) TUBNG PHARMED 2STOP 25 25FT 8P
Masterflex L/S 2-Stop Precision Pump Tubing, PharMed BPT, L/S 25; 8/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) 2-STP PHARMED 0.64MMID 12PK
Masterflex Ismatec Pump Tubing, 2-Stop, PharMed BPT, 0.64 mm ID; 12/PK, Avantor
Huber USA Hose MT-200-2-M16x1, Metal, 200 cm length, 12mm width
Hose MT-200-2-M16x1, Special Insulation with additional smooth silicon hose, ends covered with silicon caps
ATLANTIC BIOPHARM SOLUTIONS LLC MC 1/2IN TUBE OD X 1/4IN MNPT
Stainless Steel Compression Tube Fitting, Male Connector, 1/2 in. Tube OD x 1/4 in. Male NPT,
Braintree Scientific Polyethylene .034"""" x .060"""" Per Ft.,500 ft. Continuous
Polyethylene Tubing Polyethylene is a relatively rigid polymer suitable for short-term catheterizations and for ex vivo applications. Polyethylene sleeves can be slipped over less rigid catheter materials (MicroRenathane, RenaSil™) at suture points to protect the latter from inadvertent constriction **Sold for research purposes only and not for human use**
Braintree Scientific Polyethylene .017"""" x .030"""" Per Ft.,1000 ft. Continuous
Polyethylene Tubing Polyethylene is a relatively rigid polymer suitable for short-term catheterizations and for ex vivo applications. Polyethylene sleeves can be slipped over less rigid catheter materials (MicroRenathane, RenaSil™) at suture points to protect the latter from inadvertent constriction **Sold for research purposes only and not for human use**
Braintree Scientific Polyethylene .017"""" x .030"""" Per Ft.,100 ft. Continuous
Polyethylene Tubing Polyethylene is a relatively rigid polymer suitable for short-term catheterizations and for ex vivo applications. Polyethylene sleeves can be slipped over less rigid catheter materials (MicroRenathane, RenaSil™) at suture points to protect the latter from inadvertent constriction **Sold for research purposes only and not for human use**
New Era Pump Systems Inc Ultra Chemical Resistant Tubing 3/16" ID x 5/16" OD x 1/16" Wall (Purchase in increments of 10') price per foot
Ultra Chemical Resistant Tubing 3/16" ID x 5/16" OD x 1/16" Wall (Purchase in increments of 10') price per foot
AVANTOR MASTERFLEX (VWR LLC) MFLEX TUBING CHEM BIO 15 50FT
Masterflex L/S High Performance Precision Pump Tubing, Chem-Durance Bio, L/S 15; 50 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) TBNG TYGON E-LFL 1.52MMID 100F
Masterflex Ismatec Pump Tubing, Tygon S3™ E-LFL, 1.52 mm ID; 100 ft, Avantor