Tubing Connectors and Fittings
AVANTOR MASTERFLEX (VWR LLC) FTNG W MLR .12-.15 PPQC 10PK
Masterflex Male Luer Winged .120IN to .150IN in Polypropylene Cleanroom Manufactured, Avantor
AVANTOR MASTERFLEX (VWR LLC) REDUCER Y PP 3/8X1/2 10/PK
Masterflex Fitting, Polypropylene, Y-Connector, Hosebarb Reducer, 3/8IN ID x 3/8IN ID x 1/2IN ID; 10/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) Masterflex Fitting, HDPE, Elbow, Hose Barb to Threaded Adapter, 3/8"" ID x 1/4"" NPT(M); 100 PK
Barbed elbow fittings are designed for quick and easy assembly without tools. Combine these simple and economical fittings with our flexible tubing for use in your low-pressure applications (generally less than 30 psi).
Cole-Parmer CPC (Colder) AseptiQuik S Quick-Disconnect Fitting, Low-Flow, Genderless Hose Barb, High-Temperature Polycarbonate, 3/8" ID; 1/Each
Low-flow genderless connectors simplify integration while maximizing flexibility
AseptiQuik genderless connectors provide secure connections and quick assembly. The interior flow path is never exposed to the exterior environment providing sterile connections, even in non-sterile environments. To use, unsnap and flip down the protective cover, align connectors with the pull tabs, slide the connectors together and squeeze until you hear an audible “click”, snap the tabs together, then pull the tabs to simultaneously remove both membranes from the connector halves. Connectors are made from ADIF materials. High-temp PC withstands autoclaving up to 130°C (266°F) for 60 minutes.
Bellco Glass, Inc. Stainless Steel Curved Harvest Tube,36L 1/2OD x 24" - Round Bottom Vessels"
Stainless steel curved harvesting tube for 36l round bottom omni vessels. Manufactured from 316l stainless steel with ra finish of 32 micro inch or better inside and out electropolish finish. MADE IN THE USA. Size: 36l Dimensions: 1/2" x .430 x 24"
Microsolv Technology Corporation Union, Connector, Cross, High Pressure, 0.30mm Through Hole with 10-32 Screw Threads. PEEK, Round with an Internal X. Use with 1/16" Tubing. 1 EA.
This low dead volume, "Union" is used to connect the same size PEEK or Stainless Steel tubing on both ends, in the high pressures zones of HPLC systems. A "Cross Connection" is often used to split flow into two or three directions or to combine two or three streams into one.Use with Two Finger Tighten Connectors (nuts).
Microsolv Technology Corporation Union, Connector, Tee, High Pressure, 0.50mm Through Holes with 10-32 Screw Threads. Carbon PEEK. Use with 1/16" Tubing. 1 EA.
This "Union" is used to connect the same size PEEK or Stainless Steel tubing on all ends, in the high pressures zones of HPLC systems. A "Tee Connection" is often used to split flow into two directions or to combine two streams into one. Carbon PEEK has been reinforced with carbon fiber, giving it the highest strength and stiffness of all the PEEK grades and improving its load-carrying capacity.
MSC Legris KP23876 1/4" Outside Diam, Nylon Push-to-Connect Tube Union Tee 290 Max psi
Legris KP23876 1/4" Outside Diam, Nylon Push-to-Connect Tube Union Tee 290 Max psi
AVANTOR MASTERFLEX (VWR LLC) ELBOW 90-DEG LADISH 1IN CLAMP
Masterflex Fitting, Polypropylene, Elbow, Sanitary Clamp Union, 1IN Ladish Clamp x 1IN Ladish Clamp, Avantor
AVANTOR MASTERFLEX (VWR LLC) ADAPTER PP 3/8IN NPT F
Masterflex Fitting, Polypropylene, Straight, Sanitary Clamp to Thread, 3/4IN Mini x 3/8IN NPT(F), Avantor
AVANTOR MASTERFLEX (VWR LLC) FITTING ADAPT10-32X1/8FTFT 10P
Masterflex Fitting, HDPE, Straight, Hosebarb to Thread Adapter, 1/8IN ID x 10-32 UNF(M); 10/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) FTNG.ADAPT.10-32X1/16IN 25/PK
Masterflex Fitting, Nylon, Straight, Hosebarb to Thread Adapter, 1/16IN ID x 10-32 UNF(M); 25/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) FITTING KIT BLACK NYLON
Masterflex Fitting Kit, Black Nylon, Elbow and Tee, Threaded Adapter to Hose Barb; 1 Set, Avantor