Tubing Connectors and Fittings
Chemglass Life Sciences Adapter, Tooled Pluro Stopper Flare to 20-400 GPI Thread
Adapter, Tooled Pluro Stopper Flare to 20-400 GPI Thread. Adapter with tooled flare top is used for reduced pressure filtration with plain stem Buchner funnels. Flare accepts a #2 Pluro Stopper. ADAPTER IS NOT SUPPLIED WITH PLURO STOPPER UNLESS PURCHASED AS A KIT. SEE CG-1401 FOR STOPPER. Adapters are used for filtration directly into vials. There are three top configurations, with the bottom of all adapters having a 20-400 GPI thread for connection to vials using a CG-1318 Threaded Connector. Design incorporates a drip tube sealed within thread to prevent breakage and are supplied with a 2-1/2” PTFE delivery stem. Hose connection is 10mm OD at the largest serration. ADAPTERS ARE SUPPLIED WITH PTFE DELIVERY STEM.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Fitting, Polycarbonate, Four-Way, Stopcock with Male Luer Lock, Non-Sterile; 10/PK
Choose stopcocks with either a male luer lock or a male luer slip. Handle rotates 90¿ on one-way stopcocks, 180¿ on three-way stopcocks, and 360¿ on four-way stopcocks. All have PC body and HDPE stem.
Chemglass Life Sciences 12/5 Quartz Socket Joint, Clamp Size/12. 7.5mm/Tubing O.D.
12/5 Quartz Socket Joint, Clamp Size/12. 7.5mm/Tubing O.D. Clear fused quartz socket joint. For clamps see CG-150.
Chemglass Life Sciences 18/9 Quartz Socket Joint, Clamp Size/18, 11.8mm/Tubing O.D.
18/9 Quartz Socket Joint, Clamp Size/18, 11.8mm/Tubing O.D. Clear fused quartz socket joint. For clamps see CG-150.
Chemglass Life Sciences PFA Straight Adapter, 1/4" Compression Fitting to 1/4" NPT
PFA Straight Adapter, 1/4" Compression Fitting to 1/4" NPT. PFA straight adapter, compression to male NPT fittings are ideally suited for use in corrosive environments and chemical applications. The fitting design yields a leak-tight connection and requires no special tools to assemble. The connection is achieved by merely inserting the tubing into the fitting assembly and tightening the nut. Note: Fittings have a shoulder/step. Tubing can not pass through the entire fitting. See CG-1971-81 Series fittings for this type of application.
Chemglass Life Sciences 14/20 Inner Rodavissr Joint, With Drip
14/20 Inner Rodaviss Joint, With Drip. Similar to CG-170, but with a drip tip cut at a 45¿ angle.
Chemglass Life Sciences 80mm Ground Flat Flange, Tube ID: 75mm, Tube OD: 80mm
Mating end of flange has a ground surface to provide for a liquid tight seal when greased and clamped with the CG-139 horseshoe clamp. 80mm Ground Flat Flange, Tube ID: 75mm, Tube OD: 80mm.
Chemglass Life Sciences Adapter, Distilling Trap, Kjeldahl, 24/40 Top Outer, 14/20 Lower Inner
Adapter, Distilling Trap, Kjeldahl, 24/40 Top Outer, 14/20 Lower Inner. Similar to CG-1032, but with joints of non-similar sizes at the upper and lower portion of the adapter. Dimensions are the same as the CG-1032.