Tubing Connectors and Fittings
Chemglass Life Sciences Adapter, Connecting, 29/42 Outer Joints, 30mm Between Joints, Straight
Adapter, Connecting, 29/42 Outer Joints, 30mm Between Joints, Straight with standard taper outer joints at both ends.
Chemglass Life Sciences Adapter, Connecting, 24/40 Outer Joints, 30mm Between Joints, Straight
Adapter, Connecting, 24/40 Outer Joints, 30mm Between Joints, Straight, with standard taper outer joints at both ends.
Cole-Parmer 3112 Methacrylate Balls, 3/8" (9.5 mm); 100/PK
3112 Methacrylate Balls, 3/8" (9.5 mm); 100/PK
Chemglass Life Sciences Adapter, Connecting, 29/42 Top Outer, 24/40 Lower Inner, Enlarging
Adapter, Connecting, 29/42 Top Outer, 24/40 Lower Inner, Enlarging. Used to connect dissimilar standard taper joint sizes. Lower inner joint is smaller in size than the top outer joint.
Chemglass Life Sciences Adapter, Inlet, Straight, 24/40 Joint Size, Hose Connection
Adapter, Inlet, Straight, 24/40 Joint Size, Hose Connection. With serrated hose connection having an O.D. of 10mm at the largest serration sealed between the top outer and lower inner standard taper joints.
Chemglass Life Sciences Adapter, Vacuum Take-Off, Long Stem, 24/40 Joint Size
Adapter, Female Luer Lock, Vacuum, 1/4"-28 Thread, 14/20 Inner. Adapter has a 1/4” -28 thread that accepts a female luer lock adapter which provides a convenient way to connect solid phase extraction (SPE) cartridges, tubes, or syringes with a male luer lock fitting to a standard male taper inner joint. The adapter provides for easier sample concentration and clean-up while reducing the chances of cross-contamination. Hose connection is 10mm OD at the largest serration. Supplied complete with 1 each CG-1055-20; 1/4”-28 Female to Female luer lock adapter.
Chemglass Life Sciences Adapter, 24/40 Inner Joint, 0-4 valve, Airfree, Schlenk
Adapter, 24/40 Inner Joint, 0-4 valve, Airfree, Schlenk. Adapter allows standard single neck round bottom flasks to be used as storage vessels. Sampling can be accomplished by removing 0-4mm Chem-Vac™ Chem-Cap plug while maintaining inert gas purge thru sidearm. Available with a choice of 14/20 or 24/40 standard taper inner joint.
Chemglass Life Sciences 1/8" Thermocouple Adapter, 24/40 Inner
1/8" Thermocouple Adapter, 24/40 Inner. Adapter has a Chem-Thread at the top to make a vacuum tight seal. It will accept our 1/8 OD thermocouple probes. Lower portion of the adapter is reduced down to hold the thermocouple securely in place and away from the agitators. Supplied complete with a Celcon cap and Viton o-ring. Perfluoro o-rings are available.
AVANTOR MASTERFLEX (VWR LLC) Luer Adapters, Male Luer Lock to 1/16"" ID, Wide-Bore, Nylon, 25/Pk
Male Luer Adapters, Lock to 1/16"ID, Wide-Bore, Nylon, 25/Pk, offers a variety of barbed luer adapters to meet your application's needsStandard hose barb for use with flexible tubingSmooth bore hose barb to reduce flow turbulence and risk of line contaminationWide-bore hose barb for enhanced fluid path flowLow-profile hose barbs for use with semi-rigid tubing such as nylon, polyethylene and polypropylene
AVANTOR MASTERFLEX (VWR LLC) Male Luer Adapter, 3/32"", PP, Animal Free, 25/pk
Animal Free Male Luer Adapter, 3/32", Polypropylene, 25/pk, Manufactured of animal-free natural polypropylene, these luers meet Class VI specifications. Luers offer superior chemical resistance and are suited for ETO and gamma sterilization. (not recommended for autoclaving).
Chemglass Life Sciences Thread size: GL-18, Style: Bent, Hose OD (mm): 10.5, Hose ID (mm): 7, Length (mm): 65
Removable hose connections, high temperature, Thread size: GL-18, Style: Bent, Hose OD (mm): 10.5, Hose ID (mm): 7, Length (mm): 65. PFA hose connections with a Viton rubber seal for use with GL-14 or GL-18 glass screw threads. Enables the connection of cooling or vacuum hose by simply screwing either style (straight or bent) onto the glass thread instead of forcing tubing over a serrated glass connector. Connection will withstand temperatures up to 250¿C.*** CAPS SOLD SEPARATELY. SEE CG-195-H ***
Chemglass Life Sciences Outer Luer Joint, 8mm OD x 5.0mm ID Capillary
Outer Luer Joint, 8mm OD x 5.0mm ID Capillary. Outer joint manufactured to the same specifications found on medical and research syringes. Complies with Federal Specification CG-S-921b and USAST Standard Z70.1. Available tooled on three tubing sizes.