Liquid Chromatography Instruments
Waters Corp Performance Plus Vacuum Degasser Chamber, Stented;
Performance Plus Vacuum Degasser Chamber, Stented;
Perkin Elmer US LLC Check Valve Kit for ASXPRESS PLUS
The value body is polypropylene and the diaphragm is Viton. The two barbed ends are 3.2 mm in diameter.
Perkin Elmer US LLC MEINHARD Plus PFA Capillary Holder
This Capillary Holder is also used with PerkinElmers High Throughput System (HTS). HTS affords ultra-fast analysis, dramatically reducing laboratory overheads and the cost of analysis. This holder is included in the Tubing Accessories Kit for HTS (N8150144).
Perkin Elmer US LLC MEINHARD Plus Nebulizer Sample Introduction Line for NexION
This Sample Introduction Line is included in the Organics Sample introduction Kit - Orange (N8150031), Sample Introduction Kit for NexION 1000 ICP-MS - Purple (N8150038), Sample Introduction Kit for NexION 2000 Base Configuration - Blue (N8150034), and the Sample Introduction Kit for NexION 2000 Core Configuration - Green (N8150035). It is also included in the NexION 2000 Base Configuration Consumables Kit (N8150054), NexION 2000 Core Configuration Consumables Kit (N8150055), and the NexION 1000 Consumables Kit (N8150058).
Perkin Elmer US LLC Low Pressure Piston for PerkinElmer Series 4, Integral 4000, PerkinElmer Series 200, 400, 410, Model 250 and 620 Pumps built after December 1989
Low Pressure Piston for PerkinElmer Series 4, Integral 4000, PerkinElmer Series 200, 400, 410, Model 250 and 620 Pumps built after December 1989
Perkin Elmer US LLC Sample Loop for 6-Port Valve, Volume 1 mL, Fitting Size: 1/16 in
1/8 in. fitting loop for valves with 0.030 in. standard port diameter. 1/16 in. fitting loop for valves with 0.016 in. standard port diameter.
Perkin Elmer US LLC Sample Loop for 10-Port Valve, Volume 100µL, Fitting Size: 1/16 in
1/8 in. fitting loop for valves with 0.030 in. standard port diameter. 1/16 in. fitting loop for valves with 0.016 in. standard port diameter.
Perkin Elmer US LLC Replacement Rotor for 1/16 6-Port Valve, Temperature T
The T type rotor material is designed for use in high-temperature applications, requiring the valve to be at or above 300°C. In order to seal properly and turn easily, after installation, the rotor should be temperature conditioned by brining the valve assembly to 325°C and cycling the valve (on-off) 10 times. The temperature of the valve then can be set according to the requirements of the user.
Perkin Elmer US LLC S-Swafer Splitter
Swafer micro-channel wafer technology is an innovative and user-friendly approach for flowswitching and splitting applications - it delivers unparalleled hardware and application flexibility, expanding the capabilities of capillary gas chromatography (GC).
Bellco Glass, Inc. These stainless steel port assemblies are designed for use with media storage bottles for adding and withdrawing media or liquids. The 2- port models feature a siphon vent tube and is supplied with a 45mm polypropylene blue open top screw cap and white si
These stainless steel port assemblies are designed for use with media storage bottles for adding and withdrawing media or liquids. The 2- port models feature a siphon vent tube and is supplied with a 45mm polypropylene blue open top screw cap and white si
Bellco Glass, Inc. Stainless steal sparger has stainless steal frit with 10 micron porosity for introduction of gentle stream of air bubbles into bioreactor vessel beneath the impeller of mammalian cell culture. Fits into 10mm port on 3L metric headplate.
Stainless steal sparger has stainless steal frit with 10 micron porosity for introduction of gentle stream of air bubbles into bioreactor vessel beneath the impeller of mammalian cell culture. Fits into 10mm port on 3L metric headplate.