HPLC Solvent Handling Component Accessories
Alkali Scientific 1000uL PerkinElmer Revvity Jan
Alkali Scientificdesigns its PerkinElmer automation tips for seamless compatibility with PerkinElmer Janus Varispan liquid handlers Using our PerkinElmer Janus-compatible automation tips eliminates the need for a separate labware definition and there is no requirement to modify PerkinElmer Janus automation control software protocols This conductive black 96-format tip is designed to be fully interchangeable with the original PerkinElmer P1000 automation pipette tip Additionally it is compatible with Sciclone Zephyr Evolution P3 RapidPlate MiniTrak and MultiProbe II HT/ET systems ApplicationsThe PerkinElmer P1000 conductive black tip is designed for volume transfers up to 1000 L and provides outstanding precision and accuracy Its capacity and length offer flexibility in protocol design allowing it to access both 96-format and 384-format plates These tips are compatible with Janus Varispan pipetting arms Alkali Scientificmanufactures its PerkinElmer Janus-compatible P1000 tips f
Alkali Scientific 1000uL PerkinElmer Revvity Jan
Alkali Scientifichigh-quality pipette tips are compatible with the Fontus and the JANUS G3 VariSpanpipetting module and can be used for a variety of automated liquid handling applications These tips are manufactured to stringent specifications under strict process controls and assembled via automation to ensure consistent performance and quality Tips are certified RNase-/DNase-free and nonpyrogenic Available in nonsterile sterile non-filtered filtered and wide-bore Also available in Maxymum Recovery to further improve accuracy and precision while reducing sample loss Black or Clear polypropylene tips are available in 96-well and 384-well format designed for PerkinElmer Janus/Evolution P /Minitrak/PlateTrak MDT-96 P235 MDT-96 P50 and MDT-384 30 L head The PerkinElmer P1000 conductive black tip supports precise volume transfers up to 1000 L delivering exceptional accuracy and flexibility for various protocols Its design allows access to both 96-format and 384-format plates and is
IDEX Health & Science Upchurch TI FILTR END FITTING 2U 10/PK
NC2056309 TI FILTR END FITTING 2U 10/PK
Foxx Life Sciences EZBiopure Titanium Round Media Bottle Assembly, MTO, 1L, PETG Bottle for Aseptic Sampling and Sterile Storage, Single Use Technology with Pureweld Tubing, Luer and GL45 VersaCap with Vent and Dip Tube, 10/CS, Sterile
Foxx Life Sciences presents its sterile, single-use EZBiopure Titanium Round Media Bottle Assembly, available in Polyethylene Terephthalate Glycol (PETG) or Polystyrene (PS).
Designed for fluid transfer and storage, this assembly features an angled shoulder for smooth pouring and molded grips for a secure hold, even with gloves. With Foxx's patented VersaCap, these assemblies need no machining, ideal for single-use applications.
Each assembly includes EZBiopure TR Bottle, Open Cap with Adapter, Close Cap for Storage, TPE Tubing (ID 1/8” × OD ¼”), Fittings with Male & Female Connectors(CPC MPC/AQS or Plug), Diptube for Precise Draw, 0.22µm Vent Filter, Ratchet-Style Pinch Clamp. Each unit is double-bagged and Gamma Sterilized in the USA.
Features
Easy to read graduation marks with ± 5% accuracy
Made with USP Class VI components.
Gamma Compatible and meets sterile assurance level (SAL) of 10-6
Available in 125ml, 250ml, 500ml and 1L.
Thermo Scientific MOBILE PHASE TEST 2L
Demo Phase, used for installation and system performance evaluation.
Optimize Technologies ITB™ PTFE Plunger Seal, Shimadzu LC-6A, LC-7A, LC-10AS, LC-10AT, LC-10ATVP, LC-20AT
Optimize Piston Seals are the longest lasting seals on the market. Machined from either of two proprietary polymer blends, UHMW-PE or ITB, Optimize Seals provide the ultimate in high pressure sealing capacity. For mostly aqueous buffered mobile phases, PTFE-based Improved PTFE Blend (ITB) seals are a superior choice for applications with elevated temperatures, high organic content, or when the broadest possible solvent compatibility is required. ITB™ seals tend to be softer than those made from UHMW-PE, making them more forgiving at high pressures where piston side-loading or misalignment may occur. This softer nature also leads to more shedding, but the ITB™ proprietary blend is designed to shed particles that are large enough to be caught at the surface of a standard 2µm frit, not embed within it. This item is equivalent to OEM part numbers 228-35145-00 and 228-11999-00.
Optimize Technologies Sapphire Plunger, Shimadzu LC-10ATVP, LC-20AT
Pistons are, by design, a consumable part of the HPLC pump and should be replaced on a regular preventative maintenance schedule. To maintain peak performance and avoid unplanned downtime, sapphire pistons require inspection every six months with yearly or as-needed replacement. Optimize sapphire pistons offer optimal concentricity and resistance to wear. Each sapphire rod is specifically cut in relation to the grain of the crystal lattice, yielding maximal resistance to breakage and superior wear characteristics. Attachment of the rod to the piston ferrule is performed through a proprietary process ensuring concentricity. This is an important, often overlooked procedure parameter that has a direct effect on seal lifetime. This item is equivalent to OEM part numbers 228-35009-92 and 228-35009-93.
Foxx Life Sciences EZwaste HPLC Solvent Waste System, Replacement Fittings, 1/4 Inch Hose Barb Fittings for 1/4 Inch ID Tubing, Black Fitting, 1/8 Inch MNPT Thread, 25/PK
330-0946-OEM: EZwaste Replacement Fittings, 1/8" MNPT, 1/4" HB, 25/pk. Foxx Life Sciences' replacement fittings secure waste tubes to carbos, providing the closed system necessary to prevent spills. The EZwaste Solvent Waste System is designed to be an affordable solution for HPLC liquid waste disposal. Each system is manufactured to safely collect waste from two HPLC machines. This system features an activated carbon filter, which traps volatile organic compounds from being released into the air. This prevents chemicals from being inhaled by lab workers, and provides an easy mechanism of disposal for vapor wastes. The EZwaste Solvent Waste system also features a closed-loop design which protects against leaks and spills, improving overall lab safety.
Foxx Life Sciences EZwaste HPLC Solvent Waste System, Replacement Fittings, Plugs for 1/8 Inch OD or 1/16 Inch OD Ports, Black Plug, 1/4-28 Thread, 30/PK
330-0934-OEM: EZwaste Replacement Fitting, 1/4-28 Plugs, 30/pk. Foxx Life Sciences' replacement fittings secure waste tubes to carbos, providing the closed system necessary to prevent spills. The EZwaste Solvent Waste System is designed to be an affordable solution for HPLC liquid waste disposal. Each system is manufactured to safely collect waste from two HPLC machines. This system features an activated carbon filter, which traps volatile organic compounds from being released into the air. This prevents chemicals from being inhaled by lab workers, and provides an easy mechanism of disposal for vapor wastes. The EZwaste Solvent Waste system also features a closed-loop design which protects against leaks and spills, improving overall lab safety.
Foxx Life Sciences EZwaste HPLC Solvent Waste System, Cap-Only Assembly, 83mm (83B) VersaCap with Four (4x) Ports for 1/16 Inch O.D. Tubing; Four (4x) Ports for 1/4 Inch O.D. Tubing
330-0431-OEM: EZwaste System, 83mm Cap, 4x 1/16", 4x 1/4" OD Tubing & Filter. Foxx Life Sciences EZwaste Solvent Waste System is designed to be an affordable solution for HPLC liquid waste disposal. Each system is manufactured to safely collect waste from two HPLC machines. This system features an activated carbon filter, which traps volatile organic compounds from being released into the air. This prevents chemicals from being inhaled by lab workers, and provides an easy mechanism of disposal for vapor wastes. The EZwaste Solvent Waste system also features a closed-loop design, which protects against leaks and spills, improving overall lab safety. Each EZwaste Solvent Waste System comes with one 83mm or 120mm open VersaCap, fittings, plugs for unused ports, a replaceable sulfur-cured EPDM gasket, and a chemical exhaust filter. *Depending on application, carbon exhaust filter life cycle may vary.