Chromatography Supplies

Standards, connectors, fittings, tubing, tools, and other supplies for liquid chromatography (LC), ion chromatography (IC), and gas chromatography (GC).

New Lab Start-Up (32)
Offers (1)

special interests

Available on GSA/VA Contract (56)
Fast Shipping (60)
Greener Choice (4)
Production Products (68)
Science Education (1)
Small and Specialty Supplier (5,582)

Type

μ_Union (1)
1 Hour (1)
1/16 in. OD x 150 μm ID x 100 mm Length with 1/32 in. OD x 50μm ID outlet tails (1)
1/16 in. OD x 150 μm ID x 100 mm Length with 360μm OD x 50μm ID outlet tails (1)
1/16 in. OD x 150 μm ID x 150 mm Length with 1/32 in. OD x 50 μm ID outlet tails (1)
1/16 in. OD x 150 μm ID x 150 mm Length with 360μm OD x 50μm ID outlet tails (1)
1/16 in. OD x 150 μm ID x 50 mm Length with 1/32 in. OD x 50μm ID outlet tails (1)

Show all

Material

100% Graphite (11)
15% Graphite, 85% Vespel (39)
316 Stainless Steel (Handle, Panel Nut, Bonnet Sleeve, Valve Stem, Bonnet, Body), PTFE (Lower Gland), Fluorine Rubber (O-Ring) (3)
40% Graphite, 60% Vespel (13)
Acrylic (1)
Aluminum (2)
Aluminum Oxide (1)

Show all

Diameter (Metric) Inner

0.050 mm (1)
0.051 mm (2)
0.053 cm (1)
0.075 mm (1)
0.076 mm (4)
0.1 cm (7)
0.1 mm (1)

Show all

Diameter (Metric) Outer

0.0317 cm (3)
0.15 cm (1)
0.158 cm (9)
0.2 cm (1)
0.275 cm (4)
0.3 cm (10)
0.317 cm (1)

Show all

Length (Metric)

< 8 cm Injector (1)
0.78 cm (2)
0.95 cm (2)
10 cm (1)
10.5 cm (23)
100 mm (7)
105 mm (45)

Show all

Product Type Specs

1078/1079 Split Liner with Frit (1)
Connectite Bottom Hole Liner (4)
Connectite Standard Liner (5)
Connectite Top Hole Liner (3)
Connnectite Bottom Hole Liner (2)
Connnectite Standard Liner (2)
Connnectite Top Hole Liner (2)

Show all

For Use With (Equipment)

0.020 in. Thru Hole (1)
0.050 in. Thru Hole; External Threads: 3/8-24 (1)
0.062 in. Compression Type Fitting, Fits Column 0.1, 0.15, 0.18, 0.25, 0.28 mm (4)
0.062 in. Compression Type Fitting, Fits Column I.D. 0.28, 0.32 mm (3)
0.062 in. Compression Type Fitting, Fits Column I.D. 0.45, 0.53 mm (3)
0.0625 in. Capillary Fitting (1)
0.0625 in. Compression Fitting Column 0.25 mm (1)

Show all

Liner Material

Borosilicate Glass (230)
Borosilicate Glass, CarboFrit (Closure Liner) (1)
Deactivated metal (3)
Glass (44)
Glass (Closure Liner) (1)
Graphite (5)
Highly Deactivated Borosilicate Glass (22)

Show all

Diameter (English) Inner

0.001 in. (3)
0.002 in. (5)
0.0025 in. (4)
0.003 in. (5)
0.004 in. (7)
0.005 in. (29)
0.006 in. (6)

Show all

Overall Length (Metric)

0.5 m (4)
1 m (14)
1.5 m (1)
1.524 m (9)
10 cm (13)
10 m (20)
100 cm (5)

Show all

Search Within Results

2,356 – 2,370 of 11,076 results

2,356

Neta Scientific INLET CAPILLARY SST 0.11M-1/UN

This item is manufactured by Agilent

Pricing & Availability

2,357

Vici Valco VICI VALCO

NC3908341 CAP-NUT-FT ZDV 1/32W/KNURL

Pricing & Availability

2,358

Vici Valco VICI VALCO

NC3908342 CAP-FT ZDV 1/16W/KNURL

Pricing & Availability

2,359

Bellco Glass, Inc. Compression Fitting, 5/16in. For 1/2 Hole"

Large flange headplate assemblies.Universal headplates fit 5l thru 36l vessels. MADE IN THE USA. Corrosion resistant 316l stainless steel.These thermowells are designed specifically for the Bellco control systems and fit through a 5/16" fitting on the stainless steel headplate. See the BCS section for complete listings. Probe adapters & compression fittings are designed using our standard 45 mm blue polypropylene open top caps and white silicone gaskets. A wide variety of fittings are available to allow pH and do monitoring via insertion of these probes into the sidearms of vessels. Bellco probe adapters are designed to allow introduction of threaded probes into vessels through 200 mm stainless steel headplate or a 45 mm vertical sidearm.

Pricing & Availability

2,360

Waters Corp PerformancePLUS Alliance Plunger Assembly

Replacement PerformancePLUS plunger assembly. ; Used in Alliance 2695. ; Made from the highest quality sapphire, this plunger preserves the life span of the plunger seal. Precise roundness and smoothness tolerances minimize the wear of the plunger seal, while alignment of the plunger within its stainless steel holder ensures that the sapphire rides directly into the center of the plunger seal, reducing wear of both parts while safeguarding pump flow rates and system retention times.