Chromatography Tubing
Perkin Elmer US LLC Stainless Steel ATD Prepacked Sample Tubes, Sorbent: Tenax™ TA60/80 Pkg 10
The Tenax TA is conditioned at 320 °C. PerkinElmer recommends a maximum temperature of 350 °C for this sample tube with a desorption temperature of 300 °C. The tubes approximate analyte volatility range is n-C7 to n-C26 and the typical analytes for the Tenax TA are aromatics except benzene, apolar compounds (BP>100 °C) and less volatile compounds.
Bioanalytical Systems Inc MD TUBING PEEK TAN
Tubing; Bioanalytical Systems; PEEK; 1m L; *Does not ship to Puerto Rico
Waters Corp Tubing, ETFE, 1/8 in (3.2mm) O.D. X 0.040 in (1.02 mm) I.D. X 10 ft (3.0 m)
Waters tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.
Waters Corp Tubing, 1/16 in (1.6mm) O.D. X 0.005 in (0.127 mm) I.D. X 5 ft (1.5 m) Length , PEEK
Waters tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.
