Chromatography Tubing
Microsolv Technology Corporation HPLC Column Set, PEEK, 7.5mm ID. Includes, 1 EA 50mm x 7.5mm Column Tube, Black, 2 EA 5um Frits, 2 EA End Fittings. 1 EA.
This complete column set is made with Victrex PEEK and we add graphite to achieve the black color of the 5/8" OD Column Tube, which is not treated with any chemicals. The polished interior is achieved through a very careful, proprietary, extrusion method.
Thermo Scientific IC TUBING 1INCH/EACH
Tubing, Color: Red, Size: 0.005 in. I.D., Volume: 0.004mL/ ft, Back Pressure: 111.360psi/ ft at 1mL/min.
Microsolv Technology Corporation Tubing, PEEK, 0.040" ID, 1/16" OD, HPLC Grade, Grey Stripe. 25 Meter Roll. 1 EA.
This HPLC Grade, PEEK tubing is extruded from virgin PEEK ( Victrex ) material without adding any additives. The red stripe is added only to the outside of the tubing leaving the interior all natural PEEK which eliminates leachables due to color. The internal and outer dimensional tolerances of this tubing is +/- 0.05mm. Color Code: Grey Stripe for 0.040" ( 1.0mm ) ID. Pressure rating: 2400 psi.
Perkin Elmer US LLC 4 mm, Ultra Deactivated Single Taper Inlet Liner with Wool for Splitless Inlets
Inlet liners for split injection have mixing chambers with tortuous flow paths to allow full vaporization of the sample. Deactivating the surface of these liners prevents active compounds from degrading. Packing the liner with wool will trap non-volatile residue and prevent column contamination when analyzing dirty samples. Inlet liners for splitless injection are generally designed as straight tubes, although new designs such as the gooseneck will help contain the sample in the injector. Packing these liners with wool will also help trap non-volatile residue and prevent column contamination. For the capillary injector on the Clarus 590 or 690 GC system.
Cole-Parmer Idex 1569 Chromatography Tubing, Orange PEEK, 1/32" OD x 0.020" ID x 5 ft L; 1/EA
Applications: Chromatography Characteristics: Unlike stainless steel, PEEK (polyetheretherketone) tubing is flexible and easy to cut. It provides excellent chemical resistance to both organic and inorganic solvents. Tubing withstands pressures to 5000 psi (3000 psi for model 02006-30). PEEK tubing has a very smooth internal surface, which causes less turbulence than metal tubing and improves resolution. Pack of 5-ft. Certification: None Maximum temperature: 212°F (100°C) Sterilize: With autoclave, ethylene oxide, or gamma irradiation
Perkin Elmer US LLC Solvent to Syringe Pump Tubing - Qty. 1
PerkinElmer carries high quality replacement parts for the Spectrum and OilExpress autosamplers to keep these instruments at optimal performance.
Waters Corp Waters PEEK Tubing and Fitting Kit, HPLC System, PEEK
The PEEK Tubing and Fitting Kit is a product designed for HPLC systems, made from PEEK material. It is considered a spare parts kit and is intended for replacement as required.
- Twelve PEEK ferrules
- Six compression screws 10-32 long
- Six compression screws 10-32 short
- One PEEK tubing .005 in. x 1/16 in. x 60 in.
- One PEEK tubing .010 in. x 1/16 in. x 60 in.
- Twelve compression screw knobs
- Designed as a spare parts kit
- Suitable for HPLC systems
- Made from PEEK material
- Intended for replacement as required
Waters Corporation Tubing, Stainless Steel, 1/16 in O.D., 0.009 in I.D., 10 ft
This stainless steel tubing is designed for optimal performance in laboratory settings, ensuring leak-free couplings, minimal band spreading, and low dead volume. It provides essential flexibility in system setup and maintenance, contributing to enhanced productivity in scientific applications.
- Designed for leak-free couplings, minimal band spreading, and low dead volume.
- Features consistent diameter and precise ferrule geometry.
- Offers flexibility in materials, lengths, and diameters.
- Tested and certified to maintain peak system efficiency.
- Guarantees consistent instrument operation and accurate results.
- Manufactured in an ISO-certified facility using ultra-pure chemicals.
- Each batch undergoes multiple tests for repeatable performance.