Chromatography Tubing
Microsolv Technology Corporation Tubing, PTFE, 0.010" ID, 1/16" OD, Low Pressure, Black. 5 Meter Roll. 1 EA.
This MicroSolv PTFE ( Polytetrafluoroethylene ) Tubing is extruded from virgin PTFE, manufactured exclusively by DuPont. We do not add any additives to the original PTFE material, except for particles for color coding. This tubing is used widely in all low-pressure, laboratory applications including before and after an HPLC Pump. The blue color can be used to identify different lines often used with Mobile Phase Delivery and Solvent Waste Systems. Since PTFE tubing contains "micro-pores" in the tubing wall, which allows a quick air exchange, consideration for for use with degassed and oxygen-sensitive solvents is needed. Internal and Outer Dimensional Tolerance: +/- 0.20mm Color: Black ( Often used for liquids that cannot be exposed to light) ID: 0.010" ( 0.25mm ) Pressure rating: 800 psi.
Microsolv Technology Corporation Tubing, PTFE, 0.020" ID, 1/16" OD, Low Pressure, Black. 5 Meter Roll. 1 EA.
This MicroSolv PTFE ( Polytetrafluoroethylene ) Tubing is extruded from virgin PTFE, manufactured exclusively by DuPont. We do not add any additives to the original PTFE material, except for particles for color coding. This tubing is used widely in all low-pressure, laboratory applications including before and after an HPLC Pump. The blue color can be used to identify different lines often used with Mobile Phase Delivery and Solvent Waste Systems. Since PTFE tubing contains "micro-pores" in the tubing wall, which allows a quick air exchange, consideration for for use with degassed and oxygen-sensitive solvents is needed. Internal and Outer Dimensional Tolerance: +/- 0.20mm Color: Black ( Often used for liquids that cannot be exposed to light) ID: 0.020" ( 0.50mm ) Pressure rating: 725 psi.
Microsolv Technology Corporation Tubing, PTFE, 0.030" ID, 1/16" OD, Low Pressure, Green. 5 Meter Roll. 1 EA.
This MicroSolv PTFE ( Polytetrafluoroethylene ) Tubing is extruded from virgin PTFE, manufactured exclusively by DuPont. We do not add any additives to the original PTFE material, except for particles for color coding. This tubing is used widely in all low-pressure, laboratory applications including before and after an HPLC Pump. The blue color can be used to identify different lines often used with Mobile Phase Delivery and Solvent Waste Systems. Since PTFE tubing contains "micro-pores" in the tubing wall, which allows a quick air exchange, consideration for for use with degassed and oxygen-sensitive solvents is needed. Internal and Outer Dimensional Tolerance: +/- 0.20mm. Color: Green. ID: 0.030" ( 0.75mm ). Pressure rating: 510 psi.
Microsolv Technology Corporation Tubing, PTFE, 0.010" ID, 1/16" OD, Low Pressure, Blue. 5 Meter Roll. 1 EA.
This MicroSolv PTFE ( Polytetrafluoroethylene ) Tubing is extruded from virgin PTFE, manufactured exclusively by DuPont. We do not add any additives to the original PTFE material, except for particles for color coding. This tubing is used widely in all low-pressure, laboratory applications including before and after an HPLC Pump. The blue color can be used to identify different lines often used with Mobile Phase Delivery and Solvent Waste Systems. Since PTFE tubing contains "micro-pores" in the tubing wall, which allows a quick air exchange, consideration for for use with degassed and oxygen-sensitive solvents is needed. Internal and Outer Dimensional Tolerance: +/- 0.20mm Color: Blue ID: 0.010" ( 0.25mm ) Pressure rating: 800 psi.
Microsolv Technology Corporation Tubing, PEEK, 0.007" ID, 1/16" OD, HPLC grade, yellow stripe. 5-meter roll. 1 EA.
This HPLC Grade, PEEK tubing is extruded from virgin PEEK ( Victrex ) material without adding any additives. The yellow stripe indicating size is applied to the outside of the tubing leaving the interior all-natural PEEK which eliminates color leachables. The internal and outer dimensional tolerances of this tubing is +/- 0.05mm. Color Code: Yellow Stripe for 0.007" ( 0.18mm ) ID. Pressure rating: 5800 psi with proper mobile phase conditions.
Microsolv Technology Corporation Tubing, PEEK, 0.055" ID, 1/16" OD, HPLC Grade, Black Stripe. 5 Meter Roll. 1 EA.
This HPLC Grade, PEEK tubing is extruded from virgin PEEK ( Victrex ) material without adding any additives. The red stripe is added only to the outside of the tubing leaving the interior all natural PEEK which eliminates leachables due to color. The internal and outer dimensional tolerances of this tubing is +/- 0.05mm. Color Code: Black Stripe for 0.055" ( 1.4mm ) ID. Pressure rating: 750 psi.
Microsolv Technology Corporation Tubing, Capillary, PEEK, 75um ID, 360um OD, Natural Color. 10 Meter Roll. 1 EA.
This small OD, PEEK, capillary tubing is extruded from virgin PEEK ( Victrex ) material without adding any additives. The internal and outer dimensional tolerances of this tubing is +/- 0.05mm. Color: Natural. Pressure rating: 5200 psi.
Microsolv Technology Corporation Tubing, FEP, 0.010" ID, 1/16" OD, Low Pressure. 5 Meter Roll. 1 EA.
This MicroSolv FEP ( Flourethylene Propylene ) low pressure tubing is chosen for use in Ion Chromatography Applications, but can be used in all low-pressure, laboratory applications including before and after an HPLC Pump such as with Mobile Phase Delivery and Solvent Waste Systems. Also known as Teflon FEP.Do not use this tubing with heat over 80⁰C. Internal and Outer Dimensional Tolerance: +/- 0.10mm Color: Natural FEP, Translucent ID: 0.010" (0.25 mm ) Pressure rating: 1650 psi.
Microsolv Technology Corporation Tubing, PEEK, 0.010" ID, 1/16" OD, General Grade, Blue. 5 Meter Roll. 1 EA.
This General Grade, PEEK tubing is extruded from virgin PEEK ( Victrex ) material without adding any additives and is often used in HPLC laboratories. The internal and outer dimensional tolerances of this tubing is +/- 0.05mm. Color Code: Blue for 0.010" ( 0.25mm ) ID. Pressure rating: 5600 psi.
Microsolv Technology Corporation Tubing, PEEK, Coiled, 0.030" ID, 1/16" OD. 945mm L, General Grade, Green, with Tubing Connectors. 1 EA.
These Flexible, Coiled PEEK Tubes will expand and contract which will save space in places such as behind an instrument and provide a Pulse Dampener Effect for Parabolic Flow Fluids which will result in a quieter base line and also reduce band broadening due to excess tubing lengths. This coil is 20mm wide when resting and 120mm when fully extended, with a total tubing length of 945mm, end to end. Color Coded: Green for 0.030" (0.75mm) ID
Microsolv Technology Corporation Tubing, PEEK, Coiled, 0.010" ID, 1/16" OD. 1585mm L, General Grade, Blue, with Tubing Connectors. 1 EA.
These Flexible, Coiled PEEK Tubes will expand and contract which will save space in places such as behind an instrument and provide a Pulse Dampener Effect for Parabolic Flow Fluids which will result in a quieter base line and also reduce band broadening due to excess tubing lengths. This coil is 50mm wide when resting and 300mm when fully extended, with a total tubing length of 1585mm, end to end. Color Coded: Blue for 0.010" (0.25mm) ID
Microsolv Technology Corporation HPLC Column Set, PEEK, 7.5mm ID. Includes, 1 EA 150mm x 7.5mm Column Tube, Black, 2 EA 5um Frits, 2 EA End Fittings. 1 EA.
This complete column set is made with Victrex PEEK and we add graphite to achieve the black color of the 5/8" OD Column Tube, which is not treated with any chemicals. The polished interior is achieved through a very careful, proprietary, extrusion method.
Microsolv Technology Corporation Tubing, PTFE, 0.020" ID, 1/16" OD, Low Pressure. 10 Meter Roll. 1 EA.
This MicroSolv PTFE ( Polytetrafluoroethylene ) Tubing is extruded from virgin PTFE, manufactured exclusively by DuPont. We do not add any additives to the original PTFE material, except for particles for color coding. This tubing is used widely in all low-pressure, laboratory applications including before and after an HPLC Pump such as with Mobile Phase Delivery and Solvent Waste Systems. Since PTFE tubing contains "micro-pores" in the tubing wall, which allows a quick air exchange, consideration for for use with degassed and oxygen-sensitive solvents is needed. Internal and Outer Dimensional Tolerance: +/- 0.20mm Color: Natural PTFE, Translucent ID: 0.020" ( 0.50mm ) Pressure rating: 725 psi.
Perkin Elmer US LLC 4 mm, Ultra Deactivated Single Taper Inlet Liner with Wool for Splitless Inlets
Inlet liners for split injection have mixing chambers with tortuous flow paths to allow full vaporization of the sample. Deactivating the surface of these liners prevents active compounds from degrading. Packing the liner with wool will trap non-volatile residue and prevent column contamination when analyzing dirty samples. Inlet liners for splitless injection are generally designed as straight tubes, although new designs such as the gooseneck will help contain the sample in the injector. Packing these liners with wool will also help trap non-volatile residue and prevent column contamination. For the capillary injector on the Clarus 590 or 690 GC system.