Chromatography Fittings
Waters Corp Carbohydrate Cartridge Column, 4.6 mm x 250 mm, 1/pk
Waters High-Performance Carbohydrate Cartridge Column is packed with 4-μm spherical silica. This column was developed to separate five monosaccharides and disaccharides to give baseline resolution in fewer than 12 minutes. The pre-packed, disposable cartridge column requires reusable end-fittings, which are available separately.
Phenomenex Inc Adapter, Female Luer to Female 10-32 Coned, PEEK, Natural P-659
Adapter, Female Luer to Female 10-32 Coned, PEEK, Natural P-659
Microsolv Technology Corporation Mobile Phase Filter, 2.5um, Last Drop™, PTFE, 1/16" Connector. 1 EA.
These Last Drop, PEEK and Polypropylene Mobile Phase Filters are manufactured with a 2.5um PTFE Filter Element and will provide very high filter capacity and throughput while using a maximum amount of solvent. The unique design allows for this flat filter to "vacuum" up to the "last drop of liquid" in the reservoir bottle. The all PEEK, 1/16" Tubing Connector uses the fitting and an ETFE ferrule to hold non-flanged low pressure tubing in to the Filter without leaking. The 2.5um pore size Element will filter undissolved particles from your solvents that are 2.5um or larger preventing them from damaging your HPLC pumps, columns or instrument. Install these filters directly in your mobile phase bottles.
Microsolv Technology Corporation Direct Adaptive HPLC Column Connector, double end fitting with 0.005" ID x 1/16th" OD, 200mm long stainless steel tubing. 1 EA.
This double end fitting, Direct Adaptive (Di-Ad™) HPLC Column Connector delivers a perfect, zero dead volume connection to any brand of column; minimize the chance of system volume induced band broadening for better chromatography while making it easy and convenient to change columns, between runs. These fittings are easily installed between the injector and the column and between the detector and the outlet side of your column. Then, simply screw the spring loaded end Di-Ad fittings into your column and the tubing pilot length will automatically be adjusted for a tight seal without any void volume. These fittings, with laser cut tubing, replaces the tubing and ordinary male nuts with ferrules or finger tight fittings already in use replacing the need to reset the ferrule swaged on the tubing each time you change column brands. This Di-Ad™ is very convenient for laboratories that use multiple column brands and want to use 0.005" (127um) ID x 200mm (7.87") l
Waters Corp AccQ-Tag Eluent A
Amino Acid Analysis (AAA) is required for many applications. AccQ-Tag Eluent A Concentrate is available to purchase separetely in a 1 X 1L format.
INTERNATIONAL MEDICAL INDUSTRIES (IMI) MALE-MALE LEUR SLIP 50/CS
NC2209967 MALE-MALE LEUR SLIP 50/CS
Chemglass Life Sciences 1/4" PFA Elbow Compression Fitting
1/4" PFA Elbow Compression Fitting. PFA elbow compression fittings are ideally suited for use in corrosive environments and chemical applications. The fitting design yields a leak-tight connection and requires no special tools to assemble. The connection is achieved by merely inserting the tubing into the fitting assembly and tightening the nut.
Trajan Scientific VICI Valco Rotor Valco 10 Port Valcon E (VAL.SSAC10WE)
VICI Valco Rotor 10 Port VICI Valcon E For 100.LC102S and 100.LC102H. [VICI Valco PN: SSAC10WE] (NEW LPP PN: VAL.SSAC10WE). Made in the USA.
Chemglass Life Sciences Column, Chromatography, Quick Separation Funnel, 30mm Coarse Frit, 152mm height above the disc, 24/40 Lower Vacuum Assembly
Column, Chromatography, Quick Separation Funnel, 30mm Coarse Frit, 152mm height above the disc, 24/40 Lower Vacuum Assembly. For performing quick separations using a vacuum source. All funnels have a lower standard taper inner joint with a sealed in drip tip and an outlet for connection to a vacuum source. All sizes have a Coarse porosity fritted disc. Special sizes are available, please call for details.