Gas Cylinder Supports
Grainger Calibration Gas 116L 3-Gas Mix
The Grainger 16N025 is a 1/4 HP, 115V, 1725 RPM, 56C Frame, Open Drip Proof, Single Phase, Ball Bearing, Electric Motor. It has a NEMA 48Y frame with a 1.15 service factor. The motor is totally enclosed, fan cooled (TEFC) with a cast iron body. It has a Class B insulation and is CSA certified. The 16N025 has a 0.8 power factor and can operate on 50/60Hz current. This electric motor would be well suited for light industrial applications.
Grainger Calibration Gas 116L 3-Gas Mix
The 16N048 is a 16 oz. dead blow hammer by Malco Products. It has a non-marring urethane striking face to prevent surface damage. The hammer head contains shot to minimize rebound. It has an ergonomic, slip-resistant, dual material handle for comfort and grip. This hammer is ideal for assembling delicate materials or working in tight spaces where rebound is undesirable. It measures 13.5 inches long overall.
Grainger Calibration Gas 116L 3-Gas Mix
The Grainger 16N047 is a 3M Novec 1230 Clean Agent Fire Extinguisher that provides fast fire suppression for Class A, B, and C fires. This UL rated, 2.5 lb extinguisher uses Novec 1230 fluid which leaves no residue and is ideal for protecting sensitive electronics. It features a steel cylinder with red powder coat finish, discharge range of 9-15 ft, and discharge time of 9 seconds. The extinguisher comes with wall mounting bracket and has a 5 year limited warranty. It meets NFPA 2010 requirements.
Grainger Calibration Gas 116L Pure Nitrogen
The GASCO Calibration Gas - Air is a calibration gas cylinder containing 20.9% oxygen gas balanced with nitrogen. It comes in a 103 liter aluminum cylinder with a CGA 590 outlet connection. The cylinder operating pressure is 1800 psi. This calibration gas is used for checking, calibrating, and bump testing gas detection instruments to ensure they are functioning properly and accurately detecting oxygen levels. The cylinder is refillable and is built to DOT 3AA 2015 specifications. The product has a 12 month shelf life and is available through Grainger.
Grainger Calibration Gas 116L Butane Air
The GASCO Calibration Gas - Air is a calibration gas cylinder containing air for calibrating gas detection instruments. This 34 liter aluminum cylinder contains 99.9995% pure air balanced with nitrogen and is certified to NIST traceable standards. The cylinder has a CGA-590 outlet with a brass 590 valve and is refillable. This calibration gas is suitable for calibrating and bump testing gas detectors used for monitoring oxygen levels. With a 2 year shelf life, this cylinder from GASCO provides high purity air from a reliable gas supplier.
Grainger Calibration Gas 116L 3-Gas Mix
The Grainger 16N016 is a 16 oz. dead blow plastic hammer with a 2-1/2 inch diameter striking face. It has a hollow head filled with steel and lead shot to prevent rebound and absorb shock. The hammer has a fiberglass handle that provides durability. This general purpose hammer allows the user to deliver heavy blows without marring the striking surface and is well-suited for assembling machines or delicate equipment. The hammer weighs approximately 1.6 lbs.
Grainger Calibration Gas 116L 3-Gas Mix
The Gasco Calibration Gas - Nitrogen is a high purity nitrogen gas used for calibration and testing of gas detection equipment. It comes in a 103L cylinder with 99.998% nitrogen. The cylinder has a CGA 580 outlet connection and is rated for service pressure up to 3000 psig. This calibration gas allows for accurate testing and calibration of gas detectors, analyzers, and other instrumentation. The high purity nitrogen can verify proper operation and response factors. With proper handling and storage, the shelf life is 2 years from the date of fill. This nitrogen gas cylinder is an ideal calibration tool for industrial safety applications.
Grainger Calibration Gas 116L 3-Gas Mix
The Grainger 16N010 is a 1/4 HP, 115V, 60Hz, 1-phase, 3450 RPM, 56C frame, open drip proof, ball bearing, C-face motor. It has a NEMA 48Y frame with a 1.25" shaft diameter and 1.38" shaft height. The motor is totally enclosed, fan cooled (TEFC) with a cast iron body, aluminum end brackets, and Class F insulation. It is designed for general purpose applications.
Grainger Calibration Gas 116L Isobutylene Air
The Grainger 16N108 is a 16 oz. fiberglass claw hammer with a smooth face and a fiberglass handle. It has a curved claw for pulling nails and a non-slip grip. The hammer head and handle are one piece for durability. It is 15 inches long and weighs 1 pound. The fiberglass handle reduces shock and has a comfortable non-slip grip. This is a general purpose hammer ideal for home or construction projects.