Face Shields
Face shields designed to provide secondary face/eye protection; must be worn over approved glasses or goggles; available in disposable and reusable models constructed of acetate, propionate, and/or polycarbonate. Regulatory compliance details can be obtained at the individual product level.
Face shields are intended as secondary face and eye protection when worn in addition to protective glasses or goggles.
Some face shields can be worn with an adjustable headband for stand-alone use. Others are made with slots that can be attached to a hood, cap, hardhat, or other headgear.
Half-face shields cover the upper half of the face and may serve as an integral part of disposable face masks, protecting the eyes as well as the nose and mouth.
Available in disposable and reusable models, face shields are often constructed of acetate, propionate, and polycarbonate materials. The plastic shield may also be:
- Clear for greater visibility
- Tinted to reduce glare
- Metallic plated for heat resistance
Many face shields have abrasion-resistant external surfaces and their internal surfaces may be treated to reduce fogging during wear.
Face shields are available in a range of thicknesses to protect against specific hazards and may be rated for performance, safety, and other regulatory compliance requirements.
MSC Jackson Safety 29062 Clear Acetate Face Shield 8" High x 15-1/2" Wide x 1.01mm Thick, For Jackson 170-B Headgear
Jackson Safety 29062 Clear Acetate Face Shield 8" High x 15-1/2" Wide x 1.01mm Thick, For Jackson 170-B Headgear
Medicus Health FLEX ARM SAFETY SPLASH SHIELD, 24" WHITE GOOSENECK ARM
∙ Flex Arm Safety Splash Shield with 18" Gooseneck Arm and C-clamp mounting base allows for precise positioning∙Flat Splash Shield mounted on a white vinyl coated flexible arm ∙Ultimate in flexibility for optimum protection with a 10" x 10" flat shield∙18" White Gooseneck arm allows for precise positioning. ∙ 10” x 10” flat shield is mounted diagonally so it adds another 13” to the overall length of the shield.∙Coated arm is easy to clean and keep clean∙Durable, scratch-resistant polycarbonate shield protects you from splashes, aerosol mist, and flying debris∙Helps meet compliance with OSHA bloodborne pathogen regulations (29 CFR Part 191.1030)∙C-clamp mount is padded to protect your desk or bench top from scratches and can be mounted on a surface up to 2" thick∙To create a permanent mount, simply remove the C-clamp and fasten to any solid surface
PRO TEX INTERNATIONAL INC (FS8) PRO-TEX Face Shields 8" - Box of 12
This item has a minimum qty of 4 per supplier requirements.
Long size PRO-TEX Face Shields (FS8) measure 8 in height from chin to forehead, 10 wide from temple to temple and 4.5 width at chin. Provides an extra inch of protection at both the chin and forehead. The long size is our most popular size. They are clear and transparent.
Hans Rudolph Inc 7450 V2 Headgear, Medium
Available in three sizes. New Quick- Release Strap Clips for quick and simple mounting and dismounting of Headgear.
Hach Company Cap Assembly, Flip-spout, with screens
Component for demineralizer bottle assembly 2184600