Harnesses and Harness Accessories
Ergodyne™ Squids™ 3760 Water Resistant Phone Pouch and Trap
Squids™ Water Resistant Phone Pouch and Trap makes it easy to carry and use your cell phone on the job, while preventing dropped objects when working at heights.
Ergodyne™ Squids™ 3798 Power Tool Bracket with Pneumatic Tool Trap™
Squids™ 3798 Power Tool Bracket with Pneumatic Tool Trap™ creates a unique tool attachment point to tether pneumatic power tools.
Ergodyne™ Squids™ 3755 Self-Adhering Tape Trap
Squids™ 3755 Self-Adhering Tape Trap provides security and extra grip by quickly wrapping on a variety of hand tools, power tools, and other equipment.
Ergodyne™ Squids™ 3190 Tape Measure Tethering Kit - 2lbs/0.9kg
Tool Tethering Kit allows users to tether tape measures making it easy to use tools on the job while preventing dropped objects when working at-heights.
Uline Miller Standard H100 Safety Harness,1 EA
Durable fall protection for warehouse and construction workers. Economical choice. Provides worker safety and meets regulatory compliance. Comfortable, lightweight and durable safety harness. Quickly connect to safety harness ring with Retractable or Shock Absorbing Lanyards, sold separately.
Grainger Wire Rope Oval Sleeve 5/16 in SS
The LOOS Wire Rope Oval Sleeve is an oval-shaped wire rope sleeve made of drop forged steel with a zinc finish. It is designed for securing the ends of 1/4 inch and 5/16 inch diameter 7x7 and 7x19 wire rope. The sleeve has a nominal length of 1-3/4 inches, width of 13/16 inches, thickness of 3/8 inches, and weight of 0.6 lbs. This wire rope end fitting provides a permanent loop termination and protects against fraying. It is rated at 1700 lb minimum breaking strength. The oval sleeve is easy to install using a hammer to swage it onto cut wire rope ends. This wire rope fitting can be used in a variety of rigging, hoisting, and securing applications.
Grainger Wiring Harness 10 ft.
The Edwards Signaling 10 ft Wiring Harness is a 10 foot long wiring harness for fire alarm systems. It is made of 18 AWG wire with a PVC jacket and has 10 conductors. The harness has plugs on both ends that allow it to easily connect devices like pull stations, smoke detectors, horns and strobes. It can handle up to 600 volts and meet UL and NEC standards. The harness provides a pre-wired solution for installing alarm devices and reduces installation time.
Grainger Wire Rope Oval Sleeve 3/16 in Copper
The LOOS Wire Rope Oval Sleeve is an oval-shaped wire rope sleeve made of drop forged steel with a zinc finish. It is designed for securing the ends of 7x19 and 6x19 wire rope. This wire rope sleeve has an internal diameter of 1/2 inch, an external width of 27/32 inch, and an external length of 1-1/4 inches. The working load limit is 2,600 pounds. This wire rope end fitting allows wire rope to be looped and secured, providing a strong and reliable wire rope termination.
Grainger G2386 Arc Flash Body Harness ExoFit NEX M
The 3M DBI-SALA Full Body Harness Arc Flash is a full body harness designed for arc flash protection. It is made with flame resistant webbing and has an arc rating of 40 cal/cm2. The harness has a back D-ring for fall arrest and features sub-pelvic support straps for comfort when suspended. It comes in sizes ranging from small to 4XL. This harness meets applicable OSHA, ANSI and CSA standards. It provides arc flash protection along with fall protection.
Grainger Wire Rope Stop Sleeve 5/16 in Copper
The Loos Wire Rope Stop Sleeve Stop is a wire rope fitting designed to prevent fraying of wire rope ends. It is made from drop-forged steel and has a working load limit of 9,000 lbs. The sleeve has an opening diameter of 1/2 inch and fits 6x19 and 6x37 class wire rope. It can be installed using common hand tools and helps protect workers from the dangers of frayed wire rope ends. The sleeve works by compressing the wire rope strands under the tapered cone. Overall this is a heavy duty wire rope stop fitting for securing rope ends.
Grainger Wire Rope Stop Sleeve 1/8 in Copper
The Loos Wire Rope Stop Sleeve Stop is a wire rope end fitting designed to prevent fraying and unraveling of wire rope ends. It is made from drop-forged carbon steel with a zinc finish and fits wire rope diameters from 1/4" to 1-1/4". The sleeve stop has a closed body with a set screw to secure it to the wire rope. Once installed, it provides a finished look to the wire rope end. The Loos sleeve stop is ANSI rated with a minimum breaking strength of 15,000 lbs. It is commonly used in rigging applications.
Grainger G2387 Arc Flash Body Harness ExoFit NEX M
The 3M DBI-SALA Full Body Harness Arc Flash is a full body harness designed for fall protection when working at height. It is made with flame resistant webbing that meets NFPA 70E arc flash protection requirements. The harness has a back D-ring for fall arrest and shoulder, chest, hip and leg D-rings for positioning. It comes in sizes ranging from small to XXL to fit chest sizes 33-52 inches and weights up to 310 lbs. The 3M harness meets OSHA, ANSI and CSA standards for fall protection.
Grainger Wire Rope Oval Sleeve 1/8 in Copper
The LOOS Wire Rope Oval Sleeve is an oval-shaped wire rope sleeve made of drop forged steel. It has a working load limit of 9,800 lbs and is designed for 5/16" 6x19 or 6x37 IPS IWRC right regular lay galvanized wire rope. The sleeve's length is 1-3/4", width is 1-1/8", thickness is 17/32", and weight is 0.19 lbs. This wire rope end fitting provides a spliced eye termination and is used for rigging and hoisting applications. The sleeve is zinc plated for corrosion resistance. It should be installed using the proper swaging technique for safe and secure wire rope connections.