Flask Accessories
Bellco Glass, Inc. MicroCarrier Impeller Assembly , 6-8L
Impeller assembly for micro-carrier spinner flasks. Consist of magnet holder, silicone plug, magnet, and ptfe paddle. MADE IN THE USA. Impeller size: 6-8l Paddle dimensions: 3"x 7 3/4"
Chemglass Life Sciences 20mm PTFE Stem Only, Perfluoro O-Rings
20mm PTFE Stem Only, Perfluoro O-Rings. Replacement part for CG51102 Tip Drain Valve.
Chemglass Life Sciences Tool Kit, Rotary Scraper, 3-Piece, Tools for 500mL, 1L and 2L RBFs
Tool Kit, Rotary Scraper, 3-Piece, Tools for 500mL, 1L and 2L Round Bottomed Flasks. Easily remove dried-on solids from the interior walls of round bottom flasks without scratching or harming your flask!Chem-spin scraper tools provide an easy method of removing the majority of desired, dried-on solids from the interior walls of round bottom flasks. Motor driven, the spinning chain rapidly and effectively brushes the surface as the loose solids collect on the bottom. Minimal physical effort is required. Tedious, time-consuming, manual scraping with a spatula is eliminated.Tool Kits include selections of rotary scraper tools only.
Ace Glass, Inc. #7 PTFE bushing, 7.5mm center hole, (2) FETFE O-rings
#7 PTFE bushing, 7.5mm center hole, (2) FETFE O-rings
Bellco Glass, Inc. Flask Carrier, 8 L
Stainless steel bottom base for extra strength includes four rubber feet for added stability. Carriers are dishwasher and oven safe. For use with 6l or 9l vessels or carboys. MADE IN THE USA Material: stainless steel Dimensions: 10 3/14" x 9" Size: 8l
Chemglass Life Sciences Adapter, PTFE, 1/8in Thermocouple, 29/42 Inner Joint
Adapter, PTFE, 1/8in Thermocouple, 29/42 Inner Joint. PTFE adapter for use with either 1/8 or 1/4 thermocouples. Adapter has an outer Viton o-ring to form a grease-free, airtight seal between the adapter and the listed size of outer joint. The compression nut works in conjunction with the upper Viton to provide a airtight seal between the adapter and thermocouple. Adapter design permits use with CG-145 Keck clips.
Ace Glass, Inc. 10MM PTFE SADDLE O-RING 10MM PTFE SADDLE O-RING
10mm compression shaft saddle with o-ring, for use with self-aligning, lubricant free PTFE Trubore stir shaft bearing assembly. Use with 10mm O.D. stainless steel or polished glass shafts.
Chemglass Life Sciences Individual Tool, Rotary Scraper, Fits 1, 000mL Round Bottom Flasks
Individual Tool, Rotary Scraper, Fits 1,000mL Round Bottom Flasks. Easily remove dried-on solids from the interior walls of round bottom flasks without scratching or harming your flask!¿ Stainless steel and PTFE for rapid sample removal¿ Laser etched as to size and part number¿ Fits Outer Joint Size 24/40 or Larger¿ Patent pending designChem-spin scraper tools provide an easy method of removing the majority of desired, dried-on solids from the interior walls of round bottom flasks. Motor driven, the spinning chain rapidly and effectively brushes the surface as the loose solids collect on the bottom. Minimal physical effort is required. Tedious, time-consuming, manual scraping with a spatula is eliminated.
Chemglass Life Sciences 2-Port Drip Tube Assembly with Open Top Cap and Gasket
2-Port Drip Tube Assembly with Open Top Cap and Gasket. Replacement part for item 50143731. Assembly is ideal for use with bio reactors where addition or sampling is required. The drip tube assemblies are constructed of 316L electropolished stainless steel and include a blue polypropylene GL32 open top cap with a white silicone gasket. Drip tubes have a finish of 20Ra or better. Our addition and sampling vessel with hose barbed 2-port drip tube assemblies are designed for addition or sampling of media, acid or base.
Ace Glass, Inc. Head, 100mm(4in), four neck, 29/42 center, (3)24/40
Head, 100mm(4in), four neck, 29/42 center, (3)24/40
Bellco Glass, Inc. 32mm 2-Port Assembly (Schott) For Small 32mm ID
2-Port Assembly 32mm is for use on small ID 32mm side arms for spinner flask vessels. Attaches to side arms with polypropylene screw cap and silicone liner. 316 l stainless steel construction. MADE IN THE USA Polypropylene screw cap White silicone gasket BOTH TUBES: .187"OD X .117" ID, SUPPLY WITH 32mm S/CAP & WHITE SILIONE LINER, NOTE: THIS PORT ASSY WILL FIT ANY 50ml SCHOTT BOTTLE OR ANY 32mm SCREW
Grainger Clamp Magnetic Clamp 250Ml Erlenmeyer
The Grainger Approved MAGic Clamp Magnetic Clamp is a versatile magnetic clamp with a holding capacity of up to 220 lbs. It features a powerful neodymium magnet that allows the clamp to be attached to ferrous metals. The clamp has a 3" jaw opening and can be used for welding, fabrication, automotive work, and other applications requiring hands-free workholding. The clamp's swivel base allows for 360 degree rotation. It is constructed from steel with a durable powder coat finish. Overall dimensions are 3.75" x 2" x 4.5" and it weighs 1.1 lbs.
Bellco Glass, Inc. Bell-Flo IOB Assembly , 3L
3000mL Bell-Flo Internal Overhead Bearing Assembly. MADE IN THE USAInternal Overhead Bearing Assembly Specifications:Consists of screw cap, cap seal, sealing ring, compression washer, ball bearing spacer, ball bearing, bearing thimble, magnet, o-ring, magnet holder, shaft, & paddle100mm PP Blue Screw Cap: 82.6mm OD x 22.4mm tallPTFE Cap Seal: 95.3mm OD x 25mm longRed Silicone Sealing Ring: 86mm OD x 76.2mm ID x 6.1mm thickWhite Silicone Compression Washer: 27.0mm OD x 12.7mm ID x 1.6mm thickPTFE Ball Bearing Spacer: 19.1mm OD x 12.7mm ID x 22.4mm deepPBT & SST Ball Bearing: 19.1mm OD x 6.4mm ID x 7.1mm deepPTFE Bearing Thimble: 31.8mm OD x 19.1mm ID x 38.1mm longPTFE Magnet: 12.7mm OD x 76.2mm longSilicone O-ring: 7.9mm OD x 4.8mm IDPTFE Magnet Holder: 19.1mm OD x 177.8mm long316L SST Shaft: 6.4mm OD x 190.5mm longPTFE Paddle: 82.6mm wide x 177.8mm long x 1.6mm thick
Chemglass Life Sciences 2-Port Assembly, 500mL Spinner Flask
Port assemblies are constructed of 316L electro-polished stainless steel.These port assemblies fit all types of spinner flasks.The assemblies consist of a siphon and vent tube.Supplied complete with a GL-45 open top cap and silicone gasket.
Ace Glass, Inc. Thermowell, 14/35, 300mm, fits 5000mL vessels with our 6488reaction flask head
Thermowell, 14/35, 300mm, fits 5000mL vessels with our 6488reaction flask head