Label and Sign Makers
Electronic Imaging Materials Inc 2.36 Inch x 300 Meter T68 Premium Resin Ribbon - EIMINC
T68—2.36 inch x 300 meter resin ribbon specially formulated to print exceptional images. Handles some of the harshest environmental conditions—including resistance against abrasion, heat, steam and chemicals such as gasoline, mineral spirits, oil, bleach, IPA, antifreeze, and sulfuric acid. *Note: make sure to find out if ribbon is compatible with your printer & label material before purchasing. Works in Zebra printer models ZT220/230, ZT410/420, ZD420, as well as TSC TTP247/345 and TSC TX series printers.
GA International Warning Labels for General Laboratory Use - “Calibrate Before Use” 1" x 2" / 25.4mm x 50.8mm Rectangle Red text on Yellow Ambient temperature
Standard warning labels to identify equipment requiring calibration prior to use. Paper labels leave no residue behind after removal, and are for use at ambient temperatures.
GA International Cryogenic Barcode Labels for Liquid Nitrogen Storage 1.1875" x 1" + 0.375" (circle) / 30.2mm x 25.4mm + 9.5mm (circle) Rectangle + Circle White From -196°C to +110°C (-321°F to +230°F)
NitroTAG labels are available in a range of sizes and configurations, perfect for identifying small-diameter cryo vials, microtubes and tube tops, cardboard or polypropylene cryo/freezer boxes, cell culture plates, and plastic bags.These thermal-transfer cryogenic labels have a strong permanent adhesive that will remain firmly and permanently attached in ultra-low temperatures. They are designed for long-term cryo-preservation under cryogenic laboratory conditions, including in liquid and vapor phase liquid nitrogen (-196°C/-321°F), freezers (-80°C/-112°F), and dry ice transportation.NitroTAG labels require zero cure time and can be immersed in liquid nitrogen immediately after application without the need for additional tape or lamination. Additionally, these labels are waterproof, weatherproof, and durable. NitroTAG labels will adhere to wet surfaces, resist multiple freeze-thaw cycles, and can withstand elevated temperatures up to +110°C.They are also resistant to spraying wi
ZEBRA TECHNOLOGIES INTERNATIONAL LLC PRINTHEAD 300DPI KIT 170XI4
NC2962858 PRINTHEAD 300DPI KIT 170XI4
MTC Bio LABeler¿ Lab Printer w/ 115V power supply
The new LABeler™ Lab Printer provides the convenience of a lab pen with the benefits of a large desktop printer. Simply type in the desired copy using the 50+ button key pad and press the print key… within seconds your label can be cut by pressing the cut lever and is then ready for application. With over 15 available sizes, colors & material combinations, the LABeler is ideal for label identification of any laboratory vessel for nearly any laboratory application. Standard label tapes can be autoclaved, boiled or even frozen to temperatures as low as -50°C. Special Ultra-Low label tapes are also available for storage in -80°C environments or for liquid nitrogen applications.
GA International Warning Labels for General Laboratory Use - “R&D Use Only” 1" x 2" / 25.4mm x 50.8mm Rectangle Red text on Yellow Ambient temperature
Standard warning labels to identify items to be used for research purposes only. Paper labels leave no residue behind after removal and are for use at ambient temperatures.
GA International Self-Laminating Calibration Labels - "Preventive Maintenance" 1" x 2.125" / 25.4mm x 54mm Rectangle Blue text on White From -80°C to +93°C (-112°F to +199.4°F)
Self-laminating, writable, calibration labels designed for equipment that is calibrated or inspected regularly. The labels can be inscribed using permanent ink markers. The clear laminate is applied over the label protecting the written information. CalTAG™ labels can withstand a wide range of temperatures (-80°C to +72°C / -112°F to +161°F), abrasion and exposure to harsh chemicals, such as ethanol, acetone, isopropanol, thinners, detergents and surface sanitizing wipes.The self-laminating calibration labels are ideal for labeling regularly inspected medical equipment, equipment that has undergone preventative maintenance, that require calibration prior to use, or that are out of order and must not be used. Reagent calibration labels are also available for time-sensitive solutions prepared in the lab. Calibration labels customization is also available to include the company’s logos and information.
Grainger Label Tape Cartridge, Label Type Multipurpose
This tape features an exclusive laminated tape process and specially formulated adhesive. The adhesive is designed to stick to itself, as well as the laminate. It is recommended for wrapping around items, and can help to label cylindrical surfaces such as cables and PVC piping. It is best suited for wire wrapping and flagging. Each tape is 8m (26.2 ft) long.