Maintenance Lubricants and Penetrating Fluids
Ted Pella Inc PELCO Colloidal Silver Paste, 25g
Ideal where a nonflowing paste is needed for special applications. Particle size: 0.4-1.0µm, 80% are below 1.0µm. Cures in 16-20 hours, or 30 minutes @125-150°C. Clear lacquer base. Approximate Specific Gravity 2.25g/cc3. Service temperature = 200°C. Use #16021 gold/silver thinner/extender to dilute if needed.
PFEIFFER VACUUM INC Pfeiffer Vacuum Mechanical Vacuum Pump Oil, A200, Distilled Hydrocarbon, 1 Liter
This distilled hydrocarbon oil is designed for use with rotary vane vacuum pumps. It is compatible with a range of Alcatel Adixen models and is also suitable for corrosive applications. The oil is supplied in a 1 Liter volume.
- Mechanical vacuum pump oil
- Suitable for corrosive applications
- Designed for use with rotary vane vacuum pumps
- Compatible with various rotary vane pump models
HARVARD BIOSCIENCE INC STOPCOCK GREASE DOW CORNING
Total order minimum requirement of $500. If only item on order, must order QTY of 12.This convenient package includes a tube of Dow Corning 111 Valve Lubricant & Sealant, two acrylic paint brushes (sized #2 and #4), and several pallets. By "painting" the grease onto the bottom surface of a polycarbonate chamber, it is easy to evenly spread lubricant and create a water-tight seal.
World Precision Instrument Sylgard Silicone Elastomer
2-part silicone elastomer, ideal for potting and encapsulating applications
This silicone elastomer has a very low dielectric constant sealing compound, which makes it ideal for patch clamping and many other lab applications, especially in electrophysiology applications.
Ace Glass, Inc. EPOXY ADHESIVE 30ML JAR EPOXY ADHESIVE 30ML JAR
A two-component system; cures to a film highly resistant to chemicals which tightly bonds the PTFE sleeve to glass. If sleeve is damaged, the epoxy may be removed with boiling formic acid and a new sleeve may be attached. Supplied in 30mL jars with activator in separate container. 30mL will cement 25 or more joints, depending on size
Electron Microscopy Sciences Microtome Oil 50 ML
A chemically pure, high-grade lubricant used in precision instruments. Should be used periodically to lubricate cross-rollerbearings for microtomes.
Chemglass Life Sciences Krytox Low Vapor Pressure Grease, 2oz Tube
Krytox Low Vapor Pressure Grease, 2oz Tube. Highly inert, non-flammable grease for use with standard taper joints and glass stopcocks. Insoluble in almost all solvents except Freon 113. Krytox greases have demonstrated an exceptionally high degree of chemical inertness to many highly reactive chemicals. For example Krytox has shown no evidence of reactivity when exposed to: Boiling Sulfuric Acid, Fluorine Gas, Nitrogen, Tetroxide, Chlorine Trifluoride, Hydrogen Gas, Methanol, Ammonia Gas, Ethyl Alcohol, Hydrochloric Acid, Hydrazine, Diethylenetriamine, Phosphoric Acid, Sulfuric Acid, Chlorine, or Hydrogen Peroxide.LVP Grade:Krytox LVP grease is made with low vapor pressure fluorinated oils and is designed for use in high vacuum applications down to -1.0 x 10-13 Torr at 20 C, and -1.0 x 10-5 Torr at 200 C. The useful temperature range of Krytox LVP is -20 to 260 C. Supplied in convenient 2oz tubes.
Buehler MASTERPREP 0.05MICRON 64OZ
This item has a minimum qty of 3 per supplier requirements.
MASTERPREP Polishing Suspension, Particle size 0.05m, Steels tool steels, Ni-based alloys, Co-based alloys, Qty 64 oz.
Electron Microscopy Sciences Epo-Tek H20S Adhesive 1 OZ
Epo-Tek H20S is a modified version of Epo-TekH20E. Epo-Tek H20S is a highly reliable, two component, silver-filled epoxy with a smooth, thixotropic consistency (mixing ratio 1:1). This modified version offers high electrical conductivity, short curing cycles, proven reliability, and the convenient mix ratio, Epo-Tek H20S is extremely simple to use. Epo-Tek H20S pot life is 2.5 days and shelf life is one year when store at room temperature.
Grainger Antifreeze Coolant, 1 gal
Valvoline™ ZEREX™ Original Green Antifreeze/Coolant has a low-silicate formula that offers superior cooling system protection in heavy-duty applications with use of SCA (supplemental coolant additives). The traditional universal ethylene glycol-based formula has a proprietary corrosion inhibitor package to help prevent rust and corrosion, and a high-quality defoamer. ZEREX Original Green will not harm gaskets, hoses, plastics, or original vehicle finishes. It offers protection up to 150,000 mi./3000 hr./5 yr., and is compatible with major American coolant brands.
Electron Microscopy Sciences M-Bond System, M-Bond 600, 1 kit
The M-Bond adhesives are high-performance epoxy resins, which are formulated especially for bonding strain gages and special-purpose sensors. When properly cured, these adhesives are useful in temperatures ranging from -452F to +350 F (-269C to+ 175C) with M-Bond 43-B, and to +700F (+370C) for short periods with M-bond 600 and 610. In common with other organic materials, oxidation and sublimation effects at elevated temperatures limit life. Shelf Life: 3 months.
Curing time: 3.5 hours at +350F (170C)
Package: 4 x 10 ml A and 4 x 15 ml B
Sklar Instruments Sklar Instru-Guard Lube, 8oz. Bottles Sklar stru-Guard Lube SDS Ready To Use Spray - Case of 12
Sklar Instru-Guard Lube, 8oz. Bottles Sklar Instru-Guard Lube SDS Ready To Use Spray - Case of 12
Electron Microscopy Sciences Quick-Bond - Aron Alpha 200 5 x 2g/bx
Aron Alpha, Type 200, is a one component, room temperature curing structural adhesive composed mainly of alpha cyanoacrylate monomer in a liquid state. When this monomer is applied in a single thin coating to the bonding surface of the material, it instantly solidifies through polymerization to produce an extra high strength, colorless bond with virtually no shrinkage.
Electron Microscopy Sciences Crystalbond™ 555 Adhesive Stick, White 90 GR
A temporary adhesive. These wash away adhesives are used as a temporary bond for holding delicate crystals, metallurgical specimens, glass components, and ceramic substrates for dicing, slicing, drilling and polishing. These materials adhere readily to metals, glass, ceramic and then can be washed after machining away using various solvents. Use as a water soluble temporary bond, for precise high purity work.
Color: White
Softening: 125°F (52°C)
Flow point: 130°F(54°C)
Viscosity: 500 cps