Maintenance Lubricants and Penetrating Fluids
MSC Sprayon SC0206000 16 oz Aerosol Silicone Penetrant/Lubricant Clear, -50°F to 375°F
Sprayon SC0206000 16 oz Aerosol Silicone Penetrant/Lubricant Clear, -50°F to 375°F
MSC Lubriplate L0102-098 14.5 oz Cartridge Lithium General Purpose Grease 300°F Max Temp, NLGIG 2,
Lubriplate L0102-098 14.5 oz Cartridge Lithium General Purpose Grease 300°F Max Temp, NLGIG 2,
MSC WD-40 Specialist 30005 WD-40 Specialist 10 oz Dirt & Dust Resistant Dry Lube PTFE Spray with SMART STRAW SPRAYS 2 WAYS High Temperature, Low Temperature, High Pressure, For Blades & Bits, Table Saws, Drills & Lathes
WD-40 Specialist 30005 WD-40 Specialist 10 oz Dirt & Dust Resistant Dry Lube PTFE Spray with SMART STRAW SPRAYS 2 WAYS High Temperature, Low Temperature, High Pressure, For Blades & Bits, Table Saws, Drills & Lathes
MSC Tap Magic 30016P Tap Magic ProTap 1 Pt Bottle Cutting & Tapping Fluid Semisynthetic, For Use on Ferrous Metals & Nonferrous Metals
Tap Magic 30016P Tap Magic ProTap 1 Pt Bottle Cutting & Tapping Fluid Semisynthetic, For Use on Ferrous Metals & Nonferrous Metals
MSC Peak PWN0G3 1 Gallon Bottle Automotive Windshield Washer Fluid Water-Based Solution, Flammable
Peak PWN0G3 1 Gallon Bottle Automotive Windshield Washer Fluid Water-Based Solution, Flammable
MSC Mobil 110644 12.5 oz Cartridge Synthetic High Temperature Grease Red, High Temperature, NLGIG 1-1/2,
Mobil 110644 12.5 oz Cartridge Synthetic High Temperature Grease Red, High Temperature, NLGIG 1-1/2,
MSC WD-40 Specialist 30001 WD-40 Specialist 11 oz Water Resistant Silicone Lubricant with SMART STRAW SPRAYS 2 WAYS High Temperature, Low Temperature, High Pressure, Multi-Surface, Quick-Drying, Protects against Rust
WD-40 Specialist 30001 WD-40 Specialist 11 oz Water Resistant Silicone Lubricant with SMART STRAW SPRAYS 2 WAYS High Temperature, Low Temperature, High Pressure, Multi-Surface, Quick-Drying, Protects against Rust
Electron Microscopy Sciences 509, Color: White. Softening: 125°F. Flow point: 130°F. Viscosity: 500 cps., 1/EA
A temporary adhesive. These wash away adhesives are used as a temporary bond for holding delicate crystals, metallurgical specimens, glass components, and ceramic substrates for dicing, slicing, drilling and polishing. These materials adhere readily to metals, glass, ceramic and then can be washed after machining away using various solvents. Color: White. Softening: 125°F . Flow point: 130°F . Viscosity: 500 cps.
Hach Company Stopcock Grease, 150 gram Tube
For lubricating ground glass joints, glass stopcocks and valves, Tensette Pipets, and for sealing desiccators. Lubricant has low vapor pressure and resists attack by acidic and alkaline solutions.
Electron Microscopy Sciences Apiezon High Vacuum Grease AP101 4 KG
Type 101 is an excellent general purpose, hydrocarbon grease, which is intended for a variety of industrial and scientific applications. The AP 101 contains "PTFE" which confers superior anti-seize properties providing long lasting lubrication and ensuring smooth operation of stop cocks and taps. The value of AP 101 anti-seize properties are not limited to laboratory.
Electron Microscopy Sciences Invoil Diffusion Pump Oil C 500 ML
Consists of esters or specially selected hydrocarbon fractions. They were developed for vapor-diffusion pump fluids. They are high purity, very low pressure, and very stable. Pressures lower than 10^-7 torr obtainable. No need for cold trap. Good pumping speed and no corrosive deposits or vapors. Oil C obtains the highest vacuum pressure (10-7 torr) of all of the oils.
Hampton Research HR2-928-A1/Grid Screen PEG/LiCl #A1, 185 ml - 0.1 M Citric acid pH 4.0, 1.0 M Lithium chloride
HR2-928-A1/Grid Screen PEG/LiCl #A1, 185 ml - 0.1 M Citric acid pH 4.0, 1.0 M Lithium chloride. Please note items from this supplier are non-returnable.
Electron Microscopy Sciences Conductive Adhesive Tabs, 2
An affordable double-sided conductive tab for all SEM samples, these 1/2" (12 mm) diameter conductive tabs work like carbon adhesive tabs. Just remove tab from the roll, press onto surface where you want the film, lift"tab" and peel it off. The tabs can be cut to desired size before being removed from its backing, for use on smaller samples.
They have a smoother background (over 99% transparent to EDS), high strength adhesive, a thickness of only 0.002", and better particle detection. Contains a trace of nickel (<0.6%) and copper (<0.3).