Hand Tools and Power Tools
Andwin Scientific MOTTLER BRUSH 2.54 CM
The Mottler brush is ideal for dusting balances and weights. The brush is characterized as soft, thick goat hair brush and is non-scratching. It is held by a wide metal ferrule that is fastened onto a hardwood handle. This product has an overall length of 15.2 cm (6") and width of 2.5 cm (1").
Grainger End Mill Kyocera EM 0688 0.6875 Dia
The Kyocera 170GZ4 is a 4 flute, uncoated carbide end mill with a 1/2" shank diameter. It has a 1" cutting diameter and can be run at speeds up to 6,000 RPM. The overall length is 3" and it has a TiAIN coating for wear resistance when machining steel, cast iron, hardened steel, titanium and nickel alloys. It's made in Japan and well-suited for slotting, profiling, contouring, shoulder milling and face milling applications. This is a high quality end mill for demanding metal removal in industrial environments.
Grainger Threading Tool 1/8 Carbide
The Micro 100 1/8" Carbide Threading Tool is a high-performance threading tool designed for cutting a variety of materials including steel, stainless steel, cast iron, aluminum, plastic, and more. It features a carbide insert with a ground thread profile that allows for precision threading. The tool has a shank diameter of 1/8", an overall length of 3-1/2", and a reach of 1-1/2". It can cut unified threads from 4-56 to 1/4-20, metric threads from M1.6 to M6, and pipe threads. The Micro 100 threading tool offers accurate threading starts, smooth thread finishes, and long tool life. It's made in the USA and well-suited for production threading applications.
Grainger Worm Gear Hose Clamp 5/8 W 6 1/4 ID PK10
The Worm Gear Hose Clamp 304 Stainless Steel from Grainger is a 304 stainless steel worm gear clamp with a band width of 1/2 inch. It has a worm screw drive for tightening and features a 360 degree tightening mechanism. The clamp has a temperature range of -65 to 300 degrees Fahrenheit. This hose clamp is made in the USA and conforms to ASME B16.20 and SAE J1508 standards. The clamp has a tensile strength of 85000 psi.
Grainger Threading Tool 3/16 Carbide
The Grainger 16T089 is a 16-ton hydraulic bottle jack made by Hein-Werner. It has a minimum height of 10-3/4 inches and a maximum height of 16-1/4 inches. The jack has a welded base for stability with rubber pads to prevent slipping. It has a two-piece handle for easy pumping and controlled lifting. The 16T089 hydraulic bottle jack has a rated load capacity of 16 tons (32,000 lbs). It weighs 43 pounds and measures 7-3/4 x 5-3/4 x 13-3/4 inches. This heavy duty hydraulic jack is designed for shop use and lifting heavy loads.
Grainger Metal Hose 1-1/2 ID x 10 ft.L
The Hose Master Interlocked Metal Hose is a 1-1/2" diameter metal hose with a working pressure of 300 PSI. It has interlocking annular corrugations and is made of 304 stainless steel with a smooth inner wall. The hose has a temperature range of -40°F to 1000°F. It comes in a 25 ft length and has male NPT threaded ends. The hose is designed for use in industrial and commercial applications to convey air, water, oil and other fluids. It offers flexibility, durability and resistance to kinks. The interlocked corrugations allow it to be bent without compromising flow.
Grainger Threading Tool 3/16 Carbide
The Micro 100 Threading Tool is a high speed steel threading tool with a 3/16 inch shank diameter and 60 degree included angle. It has a 0.040 inch minimum minor diameter and can cut up to 8 threads per inch. This single point threading tool has a TiN coating for wear resistance and can machine a variety of materials including steel, stainless steel, cast iron, aluminum, brass, bronze, plastics and more. It is made in the USA by Micro 100 and is sold individually. The overall length is 3 inches.
Grainger Worm Gear Hose Clamp 5/8 W 6 3/4 ID PK10
The Worm Gear Hose Clamp is a stainless steel hose clamp with a worm gear tightening mechanism. It has a band width of 1/2 inch and a clamping range of 5/8 inch to 1-1/4 inches. The clamp is made from 201 stainless steel for corrosion resistance. The worm gear allows for tool-free tightening by hand. This hose clamp is ideal for automotive, industrial, and marine applications. The clamp meets SAE J1508 Type 1 standards.
Grainger End Mill Kyocera MEC 21S2011T 21mm
The Kyocera 170HR0 is a 1/2 inch diameter, 4 flute, high speed steel end mill with a 1-1/2 inch overall length. It has a TiAlN coating for increased hardness and heat resistance. The end mill has a 30 degree helix angle and can be run at speeds up to 325 SFM. It is designed for slotting, profiling, and contouring in steels, cast iron, aluminum, and other non-ferrous metals. The end mill features a center cutting design for plunge cuts and slotting.
Grainger End Mill Kyocera MEW 1000W750103T 1
The Kyocera 170HJ3 is a 1/2" diameter, 4 flute, high speed steel end mill with a 1-1/2" overall length. It has a 1/2" shank diameter and features a TiAIN coating for increased tool life and heat resistance. This end mill is designed for slotting, side milling and contouring operations in a variety of materials including steel, stainless steel, cast iron, aluminum and other non-ferrous metals. With its 4 flute design, it provides good chip evacuation while milling. The 170HJ3 end mill is made in Japan by Kyocera and is sold individually.
Grainger Screwdriver Set Torx(R) 12 pcs.
The Grainger 170G06 is a 6-inch bench vise with a 50,000 psi ductile iron body and a hardened steel screw. It has 4-1/2 inch jaw width and opens to a maximum of 6 inches. The vise has 360 degree swivel capability with a lock down swivel base. It can securely hold your workpieces in place while you saw, sand, drill or perform other operations. This is a heavy-duty vise ideal for metalworking shops.
Grainger Externalooving Blade KGDR 2T17C Ext
The Kyocera 170HW4 is a high-speed, high-volume, wide-format black and white laser printer. It prints up to 170 pages per minute at 1200 x 1200 dpi resolution. The printer has a maximum paper capacity of 18,000 sheets and supports media sizes up to 13" x 19.2". Connectivity options include Ethernet, USB 2.0, and Parallel ports. Some key features include long-life consumables, instant-on fuser technology, and PCL6/PostScript 3 emulation. The 170HW4 is ideal for high-volume printing of technical documents, manuals, posters, and more.