Medical Syringes
Products and replacement parts for use with medical syringes; includes syringe caps, tubing, cleaning products, and replacement parts such as needles, barrels, and plungers.
Medical syringes are used for drawing up and expelling liquids or suspensions. They are designed to fit appropriate needles, tubing, syringe filters, or similar devices, and are constructed of plastic, glass, or a combination of both. They may also have metal components.
General-purpose syringes comprise a barrel, a plunger, and a terminal fitting for needles or other attachments. Two-part syringes have an integral barrel and terminal fitting, with a separate plunger. Three-part syringes have a plunger fitted with a separate rubber piston at the end. Plastic medical syringes are made from polypropylene or polyethylene and are often single-use and disposable. Syringes with glass barrels frequently have metal plungers and terminal fittings, so tend to offer better overall chemical resistance and durability.
Barrels are normally graduated and transparent so that the contents are clearly visible. Syringe capacities may range from 1 mL up to 50 mL or more. Syringe fittings may be ‘Luer slip’, in which case they have simple ‘push-on’ terminals that hold needles in place just by friction, or ‘Luer-lock’, which twist and lock needles in place for a more secure fit. Luer fittings can be concentric (central to the barrel) or offset (acentric or eccentric).
Applications of Medical Syringes:
• General liquid sampling, transfer, or aspiration
• Clinical injection or sampling of blood or other fluids
Research Products International Corp Syringe for Model 8100 Repetitive Dispenser, 3.0ml, 10 per Package
Our Model 8100 repetitive dispenser allows you to pipette multiple samples-up to 58 times without refilling. Dispenses volumes from 10 ul to 5.0ml, in rapid succession. The liquid is drawn into a reusable plastic syringe that's easy to insert and remove. It locks in place without bothersome clamps or levels to get in the way. Syringes can be autoclaved (except 60ml size). The Model 8100 is lightweight with a slim design and perfect balance for effortless pipetting, either right or left handed. Fatigue is reduced to a minimum even during prolonged use. It's so easy to operate. Just slide the syringe into the holder and select the volume to be dispensed with the volume adjustment dial. Fill syringe with fill lever-then dispense samples. Syringes can be refilled and reused when pipetting the same liquid.
McKesson General Medical CATHETER 22 GA,1",BOX 50
Peripheral IV Catheter VanishPoint 22 Gauge 1 Inch Retracting Safety Needle
Tisch Scientific Polypropylene Syringe Filters
Tisch polypropylene syringe filters a low-cost laboratory solution for well-suited for many needs. They are designed for aqueous or organic solutions that have high levels of debris and for difficult-to-filter solutions. Polypropylene, as a membrane, is ideal for both HPLC chromatography applications and protein recovery analysis applications.
Med Vet International General Purpose Syringe Monoject™ 60 mL Toomey Type Tip Without Safety, 8881560265, 100/Case
General Purpose Syringe Monoject 60 mL Toomey Type Tip Without Safety 8881560265 100/Case
B BRAUN MED INC OEM PENCAN 25G 1 INCH NDL 25CS RX
** Please note that one of the following licenses is required in order to process an order:
¿Board of Pharmacy
¿Medical Director
¿Drug/Wholesale Distributor
Med Vet International Nipro Syringe & Needle, 3mL, Luer Lock, 22G X 1 1/2in, Hypodermic, 100/BX, JD+03L2238
Nipro JD+03L2238 3mL Syringe & Needle Combo comes with a clear barrel and easy to read graduation marks. The Luer Lock tip of this 3mL syringe fits conventional and safety needles. This Nipro JD+03L2238 Syringe & Needle Combo comes with a 22G X 1 1/2' Thin Wall needle. Thin wall needles are thinner than regular wall needles. The outside diameter is the same size. However, the inside diameter is bigger than the regular wall's inside diameter. Thin wall needles allow rapid and efficient drug delivery. This hypodermic needle is a hollow needle used for withdrawing fluid like blood samples, or injecting medications. This quantity is 100/BX
Perkin Elmer US LLC prepFAST M5 Line Valve Assembly
prepFAST Line/Valve Assembly with one P7+ prepFAST Valve, one P6 FAST valve and one 8 port syringe valve and one 4 port syringe valve
Recathco RECATHCO 32G OSMOTIC PUMP
32G Intrathecal catheter that adapts to osmotic mini pump. Contains one (10.50) 32g PU catheter and one (11.0) PTFE coated stylet. Dead vol. 58.6 microliters, EtO sterilized and ready for immediate use.
Electron Microscopy Sciences Gatan 3View SEM Pin Stubs Large, 2.4 mm Head, 2 x 12.5 mm Pin
The Gatan 3View systems use special sample pins. These are used inside SEMs to create 3D imaging data of samples by serial slicing and BSD imaging. These pins are fully compatible with the Gatan 3View systems; 2 mm pin, 3 mm head with cone top and total height of 12.5 mm. Manufactured from vacuum grade aluminium.
Head: 2.4 mm
Pin: 2 x 12.5 mm
Electron Microscopy Sciences Multi Holder for 8 Pin Stubs, Zeiss with Built-in Dov
This 50 mm in diameter multi pin holder is designed to save time.It is made from machined aluminum with stainless steel Allen wrench screws. It accommodates up to eight standard 12.7 mm (1/2") pin stubs.
Type: Zeiss with Built-in Dovetail
Optimize Technologies OPTI-LOK™ Low Pressure Nut for 1/8" OD Tubing, PCTFE
OPTI-LOK™ Low Pressure Fittings are an excellent choice for making low-pressure connections into 1/4-28 ports. Connections to flat-bottomed ports can be made using OPTI-LOK™ flat-bottomed ferrules for 1/16” or 1/8” tubing without the need for pre-flanged tubing ends. OPTI-LOK™ Low Pressure Fittings are precision machined to deliver leak-free, zero-dead-volume connections every time. Optimize also offers 1/4-28 unions in various through-hole sizes for joining flat-bottom fittings.