pH Electrode Accessories
Chemglass Life Sciences pH Probe, with VP, 12 x 225mm
pH probe with VP, 12x225mm. • pH Range: 0-12 • Electrodes are filled with gel reference electrolyte under a pressure of 2.5 bar • Pressure Range: From vacuum up to a process of maximum 36PSI (2.5 bar) • Temperature Range: Steam sterilization/autoclavable to 266°F (0 to 130°C) • In-situ sterilization: Up to 100 cycles under standard conditions • Fully autoclavable or in-situ sterializable
Chemglass Life Sciences pH Probe Cable K8 connection to BNC, 3'
pH Probe Cable K8 connection to BNC, 3'. Standard BNC connector to AK9 provides interface connection between pH probe and controller. For use with CLS-1438-002.
Chemglass Life Sciences DO Probe, w/VP, 12 x 425mm
DO Probe w/VP, 12x425mm. • Cathode: Platinum • Anode: Silver • Polarization: ~675mV • Output: 40 to 70nA in air at 25°C • Temperature: 0 to 60°C; Sterilization to 130°C • Stability: 2% or Readout per week at constant pressure/temp 30°C • Linearity: Better than ±0.3% of readout • Pressure: 60PSI maximum • Material: Wetted parts 316L SST • O-Ring: Viton
Grainger pH Electrode Epoxy BNC Round Tip
The SensoRex pH Electrode pH 16Y955 is a gel-filled combination pH electrode with a glass body and epoxy body gel filled reference. It has a 12 mm diameter pH bulb and internal temperature sensor. The electrode has a BNC connector and 1 m cable. It has a 3/4" NPT thread mounting and is suitable for water, wastewater and environmental water applications. The electrode has a pH range of 0-14 pH, temperature range of 0-80°C, and reference gel electrolyte of KCl.
Bioanalytical Systems Inc EC TBNG-PTFE HEAT SHRNK-CLR 12
Tubing, PTFE heat shrink tubing; 4mm OD x 30cm; 12 ft. long *Does not ship to Puerto Rico
Hach Company 3 each 50 mL printed containers for Sension+ laboratory pH calibration
Three (3), 50 mL printed containers. Use for Sension™+ laboratory pH calibration.
Grainger pH Electrode Epoxy BNC Round Tip
The Grainger Approved pH Electrode is a glass body combination electrode designed for general purpose pH measurement in the 0-14 pH range. It has a 12 mm diameter glass body, gel filled reference with Ag/AgCl reference wire, BNC connector, and epoxy body. The electrode provides accurate, stable pH measurements in aqueous solutions. It is compatible with meters that accept BNC connectors. The electrode requires storage solution and regular calibration for optimal performance.
Grainger pH Electrode CPVC BNR Flat Tip
The Grainger 16Z014 is a 3M Scotch-Brite General Purpose Hand Pad that features an open web construction with non-scratching fibers for cleaning and scouring. It has a 6 inch by 9 inch size and comes in a pack of 10 pads. The pads are made in the USA and can be used for a variety of cleaning applications including pots, pans, dishes, walls, floors, grills and more. The open web design allows debris to move through the pad during cleaning.
Pendotech PRESSURE SENSOR 3/4 INCH
This item has a minimum order quantity of 5 per supplier requirements