Electrophoresis System Accessories and Replacement Parts
Hoefer, Inc Casting Clamp Assembly for SE400,SE410,SE640 & SE660 Electrophoresis System
SE400,SE410,SE640 & SE660 Electrophoresis System Accessory,Casting Clamp Assembly (8 cm) for SE6015 (18 x 8 cm or 18 x 24 cm)
Med Vet International Cortical Self-Tapping Screws, Titanium, 2.4mm x 12mm, J1073BT, Each
Many fractures in feline and small canine patients are too small for the 2.0mm DCP and the 2.7mm CDP is too large.The difference between these plates is enormous compared to the difference between 2.7 and 3.5 CDPs. The AMI (resistance to bending) of the 2.7 CDP is 20 times stiffer than the 2.0 DCP. The AMI of the 2.4 DCP is 10 times that of the 2.0 DCP.The solution is a 2.4 series of plates and screws. The plates in both size and strength are midway between 2.0 and 2.7 DCPs. The range and specifications are shown below. The standard 1.5mm hex screwdriver (used for 1.5 and 2.0 screws) is required. The pilot drill is 1.8mm and dedicated instrumentation such as load/neutral guides are also available.
MSC SPI Combination Square Blade, 12 to 24 in, Center Head, Cast Iron
This combination square blade is designed for precise measurements and marking. It features an adjustable length range of 12 to 24 inches and includes a center head, making it suitable for various layout and measurement tasks.
- Fully hardened and tempered construction
- Adjustable blade length from 12 to 24 inches
- Equipped with a center head
- Made from durable cast iron
Med Vet International 2.4mm x 30mm Titanium Cortical Self-Tapping Screws, J1073KT, 6-Pack
Many fractures in feline and small canine patients are too small for the 2.0mm DCP and the 2.7mm CDP is too large.The difference between these plates is enormous compared to the difference between 2.7 and 3.5 CDPs. The AMI (resistance to bending) of the 2.7 CDP is 20 times stiffer than the 2.0 DCP. The AMI of the 2.4 DCP is 10 times that of the 2.0 DCP.The solution is a 2.4 series of plates and screws. The plates in both size and strength are midway between 2.0 and 2.7 DCPs. The range and specifications are shown below. The standard 1.5mm hex screwdriver (used for 1.5 and 2.0 screws) is required. The pilot drill is 1.8mm and dedicated instrumentation such as load/neutral guides are also available.
MTC Bio Tip Comb 96 Tip for KingFisher and Magnetic Bead Applications Non-Sterile 2 Combs/Pack 50 Packs/Case
Tip Comb 96 Tip for KingFisher and Magnetic Bead Applications Non-Sterile 2 Combs/Pack 50 Packs/Case
