Animal Care and Research
Med Vet International McKesson Nonsterile Cotton-Tip Swabsticks, 3 Inch, 24-103, 1000/Box
Swabstick McKesson Cotton Tip Wood Shaft 3 Inch NonSterile 100 per Pack These McKesson cotton-tipped applicators are ideal for applying ointments, cleaning wounds and collecting specimens They have soft, bulb-shaped cotton tips to enhance comfort during application These non-sterile swabsticks are absorbent They feature wooden shafts that are sturdy, versatile and biodegradable These cotton swabsticks are latex-free to prevent irritation
Instech Catheter for mouse carotid artery, 1 to 3Fr, 8cm, collar @ 1.1cm. Fits 22ga.
The Instech C10PU-MCA1301 is a mouse carotid artery catheter featuring a 1Fr polyurethane tip that transitions to 3Fr tubing for a secure fit with 22ga connectors. With an 8cm (3.1in) overall length and a silicone collar positioned at 1.1cm, it provides stable placement during carotid cannulation procedures. The catheter is EtO sterilized, individually pouched, and engineered to deliver low-dead-volume performance for accurate sampling and infusion in small-animal studies.
Features
- 1Fr to 3Fr polyurethane catheter for mouse carotid artery
- 8cm (3.1in) overall length
- 1.1cm collar for vessel anchoring
- 1Fr segment: 0.18x0.35mm; 3Fr segment: 0.6x1.0mm
- Fits 22ga connectors and mouse VAB systems
- Approx. 17µL dead volume
- EtO sterilized and individually pouched
- Designed for precise infusion and blood sampling in mice
SAI Infusion Technologies Rat Jugular Vein Catheter - 18cm PU
This item has a minimum qty of 6 per supplier requirements.
Jugular vein catheter for rat. 2.8cm 3Fr tip, polyurethane, accepts 22G blunt needle, 2 suture beads to anchor the catheter in place. Product is for laboratory animal research only. ** If a COA is required it must be requested when the order is placed or a $50.00 fee will be apply. Contact Thermo Fisher Customer Service at 800-766-7000 to request to COA. **
Med Vet International 2.4mm x 28mm Cortical Self-Tapping Screws, J1073J, 6-Pack
Many fractures in feline and small canine patients are too small for the 2.0mm DCP and the 2.7mm CDP is too large.The difference between these plates is enormous compared to the difference between 2.7 and 3.5 CDPs. The AMI (resistance to bending) of the 2.7 CDP is 20 times stiffer than the 2.0 DCP. The AMI of the 2.4 DCP is 10 times that of the 2.0 DCP.The solution is a 2.4 series of plates and screws. The plates in both size and strength are midway between 2.0 and 2.7 DCPs. The range and specifications are shown below. The standard 1.5mm hex screwdriver (used for 1.5 and 2.0 screws) is required. The pilot drill is 1.8mm and dedicated instrumentation such as load/neutral guides are also available.
Med Vet International Locking Screw 3.5mm x 16mm, J0438LC, Each
A construct using locking plates and screws acts as an internal/external fixator. The construct is stiffer than conventional plates and screws and will require less contouring as it is not essential that the plate contacts the bone. Locking plates and screws are particularly popular in TPLO where significant savings in time (and morbidity) can be made. Also useful in fracture work in situations where contouring and rigidity is a challenge. The head of Jorvet locking screws engages the plate in the standard format using a twin start fine thread. Jorvet screws are an exact fit for standard locking plates but utilize the conventional hex screwdriver rather than a star screwdriver.Locking screws are available in both 2.7 and 3.5 screw diameters. Each size requires its own dedicated drill guide. Jorvet locking plates have ‘stacked’ locking holes which allow more screws per bone fragment compared with dual hole type plates.Locking Screws 3.5mm16mm
MOLECULAR DEPOT LLC HAMA 2500-4999 ng/mL - 1 mL
High HAMA K3 EDTA Plasma (2500-4999 ng/mL) is a K3 EDTA plasma sample containing human anti-mouse antibodies (HAMA) with a titer established by a cleared HAMA ELISA method This sample is to be used to test HAMA interference in immunoassays For in vitro research use only
Med Vet International Locking Screw, 2.7mm x 26mm, J1133K
Locking Screws and Plates. A construct using locking plates and screws acts as an internal/external fixator. The construct is stiffer than conventional plates and screws and will require less contouring as it is not essential that the plate contacts the bone. Locking plates and screws are particularly popular in TPLO where significant savings in time (and morbidity) can be made. Also useful in fracture work in situations where contouring and rigidity is a challenge. The head of Jorvet locking screws engages the plate in the standard format using a twin start fine thread. Jorvet screws are an exact fit for standard locking plates but utilize the conventional hex screwdriver rather than a star screwdriver.Locking screws are available in both 2.7 and 3.5 screw diameters. Each size requires its own dedicated drill guide. Jorvet locking plates have ‘stacked’ locking holes which allow more screws per bone fragment compared with dual hole type plates.Locking Plates 2.7mm 26mm
Ace Glass, Inc. Manifold, air sampling, #25 Ace-Thred to 1inch tube end, 24inchlength, (1) #7 Ace-Thred port
Manifold, air sampling, #25 Ace-Thred to 1inch tube end, 24inchlength, (1) #7 Ace-Thred port