Animal Care and Research
Med Vet International 6mm x 16mm Titanium TTA Cage, J1072JAT
TTA (Tibial Tuberosity Advancement) CagesTitaniumCage 6 x 16mm 2.4mm screw
Med Vet International Cortical Screws, J0419I, 2.7mm x 22mm, 6 Count
2.7mm Cortical Screw. Use with 2.7mm compression and 2.7mm reconstruction plates to obtain compression at a fracture site.
Med Vet International Steinman Pin 5/64" x 7" w/ Trocar-Screw, J0251B, Each
Highest quality type 316L stainless steel IM pins. Available in the points and diameters listed below. When ordering, please match diameter with point style number. Made in U.S.A.
Med Vet International Cancellous Screws 3.5mm x 12mm L, J0423B, 6 Pack
3.5mm Cancellous Screw. 1.75 Pitch. The coarser thread has a much bigger "bite" into the bone. Use on metaphyseal or other cancellous bone. The screw needs its own tap. (JOR409c)
Med Vet International Walkabout™ Elbow Support Brace - Left - Medium/Large, J1655DL, Each
Walkabout Single Elbow
Med Vet International Locking Screws 3.5mm x12mm Star/Torx, J0438LTA, Each
Locking Screws 3.5mm x12mm Star/Torx, J0438LTA, Each
Med Vet International Self Tapping Screw, J0402A, 2mm x 8mm, 6 Count
Used in conjunction with our 2mm bone plates, 2mm self-tapping screws allow the veterinary surgeon to plate the long bones of small patients or the small bones of larger patients. Until now this has been possible only with sophisticated equipment.
Med Vet International Mid-Shaft Positive (Raised) Threaded External Fixation Pins, Small, J0371A, Each
Positive or raised thread pins have threads extending above the smooth shaft on a portion of the pin. The positive threaded pins have a tougher pull-out resistance and are the external fixation pins used almost exclusively in human orthopedics. There are two choices of pin styles and three different sizes.1. Threaded portion is in mid-shaft2. Threaded portion is at the end of the pinAll pins are 316LVM implant quality stainless steel.
Med Vet International Locking screws 3.5mm x 30mm, J0438LK, each
Locking screws 3.5mm (uses 2.7 mm pilot drill bit)
Braintree Scientific Partial Body Irradiation Shield, <25g No Flank, 1"" body dia.
Irradiation Shield 1" for mice <25g The shields are not suitable for 360 degree irradiation (typical of a Cs source), and they are limited for use in units that produce energies less than 350kVp (X-Ray). The fixtures are to be used with fixed beam X-ray sources projecting vertically and do not protect the exit side of the irradiated specimen. A shield designed for use with a Cs source typically requires 4 times the lead thickness. These shields are " (6.35mm) lead, and the attenuation factor depends on the kVp energy they are used with. Attempts to use our shields with a Cs source will result in inadequate shielding and overexposure to protected areas of an animal. The shields are regularly used in the Orthovoltage energy range (<320 kVp) and provide about a 100X attenuation. See Attenuation Curves for a better evaluation. **Sold for research purposes only and not for human use**
Med Vet International v-gel Advanced Supraglottic Airway Device - Canine - D4, J1358B, Each
v-gel Advanced Supraglottic Airway Device - Canine - D4
Med Vet International Cortical Screw, J0416D, 2mm x 12mm, 6 Count
Available in 6mm-24mm lengths, the spherical head of the screw produces compression when used in conjunction with 2mm compression plate.
Single axis counter-balanced lever arm to hold Instech stainless steel swivels. For tethered infusion of rats.
The Instech CM375BS is a single‑axis counter‑balanced lever arm designed for stainless steel swivels in rat shoebox cages. Its vertical‑pivot design removes slack from the tether while allowing the animal to reach all cage corners, and its adjustable counterweight balances the swivel and tether for smooth, stress‑reducing movement.
Features
- Single‑axis vertical pivot for controlled tether travel
- Counter‑balanced design for stainless steel swivels
- Prevents tangling and reduces animal restraint
- Supports full cage‑corner reach in asymmetrical cages
- Compatible with standard rodent shoebox cage tops
Med Vet International 2.4mm x 40mm Titanium Cortical Self-Tapping Screws, J1073QT, 6-Pack
Many fractures in feline and small canine patients are too small for the 2.0mm DCP and the 2.7mm CDP is too large.The difference between these plates is enormous compared to the difference between 2.7 and 3.5 CDPs. The AMI (resistance to bending) of the 2.7 CDP is 20 times stiffer than the 2.0 DCP. The AMI of the 2.4 DCP is 10 times that of the 2.0 DCP.The solution is a 2.4 series of plates and screws. The plates in both size and strength are midway between 2.0 and 2.7 DCPs. The range and specifications are shown below. The standard 1.5mm hex screwdriver (used for 1.5 and 2.0 screws) is required. The pilot drill is 1.8mm and dedicated instrumentation such as load/neutral guides are also available.