Animal Cage Accessories
Instech Counter-balanced lever arm for rats, 6in (15cm)
The Instech MCLA is a multi-axis counter-balanced lever arm designed for use with rats. It facilitates continuous infusion or microdialysis by moving both vertically and horizontally with the animal, which prevents slack or tension in the tether and minimizes stress on the subject.
Features
- Type: Counter-balanced lever arm
- Length: 6 inches (15cm)
- Mechanism: Uses adjustable springs for counter-balancing rather than heavy weights, making it lighter and more responsive
- Mounting: Adjustable mounting plate supports top or side attachment to various cage types
- Function: Minimizes downward force on the animal and protects delicate probes or catheters
- Installation: Slides over a pedestal and is secured with an internal set screw
Replacement dispensing tip for Instech ABS2 automated blood sampler, 18ga.
The Instech ABS2/ND18 is an 18ga replacement dispensing tip designed for the ABS2 automated blood sampler, specifically for large‑animal tube set configurations. Its conductive 18‑gauge stainless design ensures smooth fluid delivery and accurate droplet formation during automated sampling cycles, supporting reliable performance in high‑flow workflows.
Features
- 18ga dispensing tip for large‑animal ABS2 tube sets
- Conductive stainless design for stable sampling
- Provides accurate droplet formation and flow control
- Direct replacement component for ABS2 systems
- Supports high‑volume automated blood sampling
Instech Stainless steel catheter / tubing plug, 23ga x 12mm. Nonsterile. Package of 100.
The Instech SP23/12 is a stainless steel catheter plug designed to seal externalized catheters before infusion or sampling procedures. Sized at 23ga and 12mm in length, it provides a secure, low‑dead‑volume closure to maintain catheter patency and prevent fluid leakage. Rounded edges help protect delicate tubing, and the plugs are supplied non‑sterile in packs of 100 for laboratory use.
Features
- 23ga stainless steel catheter plug
- 12mm length for secure catheter sealing
- Rounded edges to minimize tubing damage
- Non‑sterile; packaged in sets of 100
- Used to close externalized catheters prior to infusion
Instech Plastic Feeding Tubes, 20ga (yellow) x 38mm, 50 sterile pouches of 5 (250 tubes)
The Instech FTP‑20‑38 is a sterile 20‑gauge polypropylene feeding tube designed for oral gavage in mice. It features a flexible translucent tube with a yellow polypropylene female luer hub and a soft elastomer tip engineered to minimize esophageal trauma and reduce the risk of inadvertent tracheal placement. FTP‑20‑38 is supplied in 50 sterile pouches of 5 tubes (250 total) for high‑volume dosing workflows.
Features
- Gauge: 20ga (yellow hub)
- Length: 38 mm
- Tube Material: Medical‑grade polypropylene
- Tip Material: Soft elastomer, trauma‑reducing
- Connection: Female luer
- Sterility: EtO‑sterilized
- Package Configuration: 250 tubes (50 pouches × 5)
- Use Case: Rodent oral gavage for dosing and compound delivery
Instech Luer stub, 25ga (red) x 0.5in (12mm), non-sterile, pack of 100
The Instech LS25 is a non‑sterile 25‑gauge red luer stub used for connecting infusion tubing or catheters to syringes or other male luer fittings. It includes a polypropylene hub with a stainless‑steel blunt, deburred tip to prevent tubing damage. LS25 is supplied non‑sterile in a pack of 100 for general laboratory infusion and sampling workflows.
Features
- Gauge: 25ga (red hub)
- Length: 0.5 inch (12 mm)
- Connection Type: Female luer for tubing-to-syringe interfaces
- Hub Material: Polypropylene
- Tip Material: Stainless-steel, blunt and deburred
- Sterility: Non-sterile
- Package Configuration: Pack of 100
- Use Case: Infusion and sampling workflows in preclinical research
Spring for Instech mouse tethers, .065in ID, .010in wire, five 12in (30cm) lengths, non-sterile
The Instech PS62 is a replacement tether spring designed for mouse infusion tethers, featuring a .065in inner diameter and .010in wire gauge to provide a lightweight, flexible spring suitable for small‑animal tethering systems. Supplied non‑sterile in packs of five, each spring is 12in (30cm) long and used for building or refurbishing dependable mouse infusion tether assemblies.
Features
- .065in inner diameter for mouse‑sized tether systems
- .010in wire gauge for lightweight flexibility
- 12in (30cm) spring length
- Non‑sterile replacement springs
- Packaged in sets of five
Innovive Inc Mouse cage bottom for use with Innovive IVC or static mouse lids, prefilled with 1/8"""" corn cob bedding.
This item has a minimum order quantity of 100 per supplier requirements. mouse bottom corncob bedding
PATTERSON VETERINARY SUPPLY INC EZ SCRUB BRUSH W/1%IODINE 30PK
This item has a minimum qty of 8 per supplier requirements.
EZ SCRUB BRUSH W/1%IODINE 30PK
Vetequip Inc DUAL PROCEDURE CIRCUIT COMPLET
Includes 2-liter inducation chamber, Y-circuit with stopcocks, 9mm, 12mm, and 14mm rodent nose cones, VaporGuards (2), and 6' 22mm evacuation tubing
Instech Luer stub, 18ga (green) x 0.5in (12mm), non-sterile, pack of 100
The Instech LS18 is a non‑sterile 18‑gauge green luer stub used for connecting infusion tubing or catheters to syringes or other male luer fittings. It includes a polypropylene hub with a stainless‑steel blunt, deburred tip to prevent tubing damage. LS18 is supplied non‑sterile in a pack of 100 for standard infusion and sampling workflows.
Features
- Gauge: 18ga (green hub)
- Length: 0.5 inch (12 mm)
- Connection Type: Female luer for tubing-to-syringe interfaces
- Hub Material: Polypropylene
- Tip Material: Stainless-steel, blunt and deburred
- Sterility: Non-sterile
- Package Configuration: Pack of 100
- Use Case: Infusion and sampling workflows in preclinical research
Instech Luer stub, 20ga (pink) x 0.5in (12mm), non-sterile, pack of 100
The Instech LS20 is a non‑sterile 20‑gauge pink luer stub used for connecting infusion tubing or catheters to syringes or other male luer fittings. It includes a polypropylene hub with a stainless‑steel blunt, deburred tip to prevent tubing damage. LS20 is supplied non‑sterile in a pack of 100 for general infusion and sampling workflows.
Features
- Gauge: 20ga (pink hub)
- Length: 0.5 inch (12 mm)
- Connection Type: Female luer for tubing-to-syringe interfaces
- Hub Material: Polypropylene
- Tip Material: Stainless-steel, blunt and deburred
- Sterility: Non-sterile
- Package Configuration: Pack of 100
- Use Case: Infusion and sampling workflows in preclinical research
Instech Luer stub, 21ga (purple) x 0.5in (12mm), non-sterile, pack of 100
The Instech LS21 is a non‑sterile 21‑gauge purple luer stub used for connecting infusion tubing or catheters to syringes or other male luer fittings. It includes a polypropylene hub with a stainless‑steel blunt, deburred tip to prevent tubing damage. LS21 is supplied non‑sterile in a pack of 100 for standard infusion and sampling workflows.
Features
- Gauge: 21ga (purple hub)
- Length: 0.5 inch (12 mm)
- Connection Type: Female luer for tubing-to-syringe interfaces
- Hub Material: Polypropylene
- Tip Material: Stainless-steel, blunt and deburred
- Sterility: Non-sterile
- Package Configuration: Pack of 100
- Use Case: Infusion and sampling workflows in preclinical research