Freeze Drying Chambers and Equipment
Norell Inc 5mm, 500MHz 7" VALVED THIN WALL NMR TUBE FOR INTERMEDIATE PRESSURE 1 Tube per pack
These pressure tubes facilitate experiments requiring conditions such as pressurized inert atmosphere blanketing, addition of reactive gaseous reagents under pressure, containment of low boiling point solvents or samples at elevated temperatures, and so on.We recommend that the maximum operating pressure should be limited to 600 kPa (6 bar, 87 psi) when using a thin wall pressure tube, up to 1200 kPa (12 bar, 175 psi) if using a heavy wall pressure tube. (Please see accompanying table for complete details).
Chemglass Life Sciences Drying Tower, 300mm Overall Height
Cylindrical shaped drying tower has a 34/28 ground glass stopper. The stopper has a hole coinciding with a serrated hose connection sealed in the outer portion of the stopper neck and a second hose connection near the base of the cylinder. A hex base is sealed to the bottom of the tower for added stability.
Labtech Inc Dry Ice Condenser
High quality glass cold finger (dry ice) condenser. No chillers needed, utilizes dry ice for optimal efficiency.
Yamato Scientific America, Inc. FLASK MOUNTING CHAMBER 12 PORT
Flask mounting chamber (12 port) for DC401/801
Essendant INDEXSDE 1/25 226-250 25
Rip Proof reinforced dual-sided laminated tabs make it easy to organize your information The binding edge is unpunched so these dividers can fit practically any binding system Ideal for briefs legal exhibits mortgage documentation files and more Avery Style is Helvetica bold type style and Allstate Style is Helvetica regular type style Collated 11x8 5 Side Tab Index Divider Style- Legal Arabic Numeric Index Divider Size- 11x8 5 Punched/Unpunched- Unpunched For Use With- Comb Binding Systems
Bellco Glass, Inc. Short width stainless steel folding impeller assembly for standard bioreactor vessels 6l 316 l stainless steel Ra finish 32 micro inch or better (wxl) 3" x 5 1/4"
Short width stainless steel folding impeller assembly for standard bioreactor vessels 6l 316 l stainless steel Ra finish 32 micro inch or better (wxl) 3" x 5 1/4"
Bellco Glass, Inc. Tray is 11" long, 7" deep and 4 5/8" high.There is approximately 2" between the trays.It's sst and there are no liners.
Tray is 11" long, 7" deep and 4 5/8" high.There is approximately 2" between the trays.It's sst and there are no liners.
Bellco Glass, Inc. This vessel is suitable for all cell culture applications- insect, plant and bacterial. Reduced height vessels maximize incubator space. 100mm neck for cap assembly and overhead drive 45mm vertical sidearm accept port and Thermowell assemblies or
This vessel is suitable for all cell culture applications- insect, plant and bacterial. Reduced height vessels maximize incubator space. 100mm neck for cap assembly and overhead drive 45mm vertical sidearm accept port and Thermowell assemblies or
Bellco Glass, Inc. Stainless steel port assembly, for 6 liter low profile vessel with vertical side arms 45mm blue polypropylene screw cap White silicone gasket 316l stainless steel Electropolished, ra 32 finish or better inside and out Longest tube is 1
Stainless steel port assembly, for 6 liter low profile vessel with vertical side arms 45mm blue polypropylene screw cap White silicone gasket 316l stainless steel Electropolished, ra 32 finish or better inside and out Longest tube is 1
Bellco Glass, Inc. Material: 316l SST with electropolish finish, ra 32 or better, inside & outDimensions: harvest tube (3/8" od) - 1" above slug, 10 9/32" insertion lengthAddition tube (1/4"od) - 1" above slug, 2 21/64" belowVent tube (1/4" od) - 1" above slug, .975" bel
Material: 316l SST with electropolish finish, ra 32 or better, inside & outDimensions: harvest tube (3/8" od) - 1" above slug, 10 9/32" insertion lengthAddition tube (1/4"od) - 1" above slug, 2 21/64" belowVent tube (1/4" od) - 1" above slug, .975" bel