Stirrer Accessories
Ace Glass, Inc. Bearing, Trubore, glass, 10mm, 34/45
10mm Trubore glass bearing with 34/45 standard taper joint. Bearing is for use with aluminum packing box in low positive pressure and vacuum applications. Using the graphite-impregnated PTFE packing and ACE Stir-Lube, pressures down to 7 microns have been obtained at 170rpm, using only a mechanical pump. Speeds over 1000rpm are not advisable due to heat generated. Indefinite packing life. Frequent tightening of the packing box is unnecessary once the packing has run in. The high vacuum lubricant trap adapter prevents lubricant from running into stirred material. Use with precision ground, 10mm stirring shaft.
Ace Glass, Inc. PTFE agitator, (4) 50mm anchor style blades, fits 10mm knob style or drilled shafts
AGITATOR PTFE 10MM 50MM BLADE
Ace Glass, Inc. 3/8" flex coupling for 10mm stir shafts
3/8" flex coupling for 10mm stir shafts consists of a flexible neoprene rubber body with a PTFE sleeve inside a corrosion-resistant metal end. Flex coupling provides angular and parallel misalignment of glass or metal stirring shaft, without danger of breakage. Rubber body absorbs shock and provides quiet, vibration-free running with great torsional stiffness. Measures 4 overall.
Ace Glass, Inc. Bearing, PTFE, non-shedding, low-vacuum, 45/50 inner joint, accepts 25.4mm OD stir shaft
BEARING PTFE 25.4MM 45/50
Ace Glass, Inc. Coupling, swivel, 28mm stir shaft, 3/8 inch stir motor shaft
COUPLING SWIVEL 28MM SHAFT
Ace Glass, Inc. Agitator, paddle, stainless steel, 10mm OD, 75mm diameter
75mm diameter stainless steel multi-paddle agitator, for use with 10mm O.D. polished stainless steel or glass stirring shafts. One or more agitators can be positioned on the shaft at various locations, using supplied set screws to secure.
Waters Corporation Needle Guide Tube, for ACQUITY UPLC Sample Manager
Waters Corporation Needle Guide Tube, for ACQUITY UPLC Sample Manager
TA Instruments Stainless Steel, Disposable Plate Shaft for UV Accessories, for Use with UV-Curing Options and Disposable Stepped Peltier Plate, Not for Use with Environmental Test Chamber ETC, HR x0
Waters TA Instruments HR X0, Stainless Steel, Disposable Plate Shaft for UV Accessories is for use with UV-curing options and the disposable stepped Peltier plate. It is not for use with the Environmental Test Chamber ETC.
Chemglass Life Sciences Stirrer Bearing, PTFE, Chem-Stir, Complete, 10mm, 24/40 Inner Joint
Stirrer Bearing, PTFE, Chem-Stir, Complete, 10mm, 24/40 Inner Joint. Grease-Free PTFE stirrer bearing designed for use under moderate vacuum applications. The bearing consists of a threaded glass adapter having an inner joint, a set of PTFE washer style bearings, a stainless steel spring, nylon alignment ring and Celcon compression cap. The unique design of this bearing provides hours of continuous vacuum operation, with a minimum of "flaking" of the PTFE bearing surfaces.PLEASE NOTE: FOR USE ONLY WITH CG-2078 OR CG-2079 PRECISION GROUND AND POLISHED STIRRER SHAFTS.
Chemglass Life Sciences Bearing Body Only, 10mm Stir Bearing, Mechanical Seal, 1-3/4in Threaded Connection
Body Only, 10mm Stir Bearing, Mechanical Seal, 1-3/4in Threaded Connection
Chemglass Life Sciences Stirrer Shaft, 6mm OD x 305mm
Stirrer Shaft, 6mm OD x 305mm. Replacement part for CG206001 Micro Stirrer Assembly.
Chemglass Life Sciences Stirrer Bearing, Macro, Glass, for 10mm Shaft, 45/50 Inner Joint
Stirrer Bearing, Macro, Glass, for 10mm Shaft, 45/50 Inner Joint. Precision bore bearing for use in moderate vacuum with a CG-2074 or CG-2075 ground 10mm stirrer shaft. NOTE: Not for use with CG-2078 or CG-2079 polished stirrer shafts.