Stirrer Accessories
Bellco Glass, Inc. Impeller Assembly , 25mL
Glass shaft impeller assembly for 1967-style hanging bar spinner flask. Consist of ptfe magnet holder and ptfe coated magnet. MADE IN THE USA. Glass shaft ptfe magnet Size: 25ml
Bellco Glass, Inc. L-Shaped Sparger W/Holes,3L For 10mm Port
Stainless steal sparger has stainless steal frit with 10 micron porosity for introduction of gentle stream of air bubbles into bioreactor vessel beneath the impeller of mammalian cell culture. Fits into 10mm port on 3L metric headplate. L-Shaped Hose Barb Sparger With Drilled Holes,3L. Material: 316L with electropolish finish. Overall Length: 11 3/16". Insertion Length: 9 3/4". Hole Sizes: 0..06" (7 holes). Supply complete: O-Ring, SST Washer & Nut.. MADE IN THE USA
Glas Col LLC Stirrer Accessory
90 degree clamp for 1/2" to 3/4" diameter rod, used with sitrring systems and stir tester systems.
Bellco Glass, Inc. Impeller Assembly , 50-500mL
Glass shaft impeller assembly for 1967-style hanging bar spinner flask. Consist of ptfe magnet holder and ptfe coated magnet. MADE IN THE USA. Glass shaft ptfe magnet Size: 50-500ml CONSIST OF: PTFE MAGNET HOLDER and PTFE COATED MAGNET
Ace Glass, Inc. Stir shaft with PTFE retreat agitator, 10mm OD x 400mm covered stainless shaft with 50mm exposed for stir motor chuck, 70mm OD agitator with 10mm high blades
10mm O.D. x 400mm L, PTFE-covered stainless steel stir shaft with 50mm exposed for stir motor chuck. Shaft has a solid 70mm O.D. PTFE 30 retreat curve agitator with 10mm high blades.
Ace Glass, Inc. 6mm 32cm solid glass stir shaft, polished, button type
6mm 32cm Solid Glass Stir Shaft,polished,button Type
Bellco Glass, Inc. Stainless Steel Pitched Blade Impeller, 3L For 3L Bioreactor Systems
SST Pitched Blade Impeller MADE IN THE USA Material: 316l SST with electropolish finishEnglish threadOD: 1 3/4"For 5/16" od shaftsUsually requires 2 each
Bellco Glass, Inc. Low Profile PTFE Impeller Assembly ,6 L
The Bellco low profile ptfe impellers are designed to be used with bellco low profile cell culture vessels. These low profile impeller consist of a semi-rigid ptfe blade, ptfe paddle holder and stainless steel shaft. Impellers are shipped fully assembled. Paddle Size: 3"Tx 6 3/4"W. Requires Bellco Overhead Drive & Cap Assembly. MADE IN THE USA
Bellco Glass, Inc. Stainless Steel Over Head Drive Short Width Impeller Assembly , 8L Short Width
Short width stainless steel folding impeller assembly for standard bioreactor vessels 8l. MADE IN THE USA. 316 l stainless steel Ra finish 32 micro inch or better (wxl) 3" x 6"
Bellco Glass, Inc. Stainless Steel Shaft Assembly ,250mL
Stainless Steel Shaft Assembly The Bellco Stainless Steel Shaft Conversion Kit is designed to convert your standard glass shaft to stainless steel on 1967 and1965 Spinner Flasks. Sizes range from 100 mL to 36 liters for 1965 spinners and 100 to 3000 mL for 1967 spinner flasks. Material: 316L Stainless. MADE IN THE USASteel and polypropylene compression fitting. Size: 250ml
Chemglass Life Sciences Diameter x Height (mm): 125 x 43, Reactor Size: 2L-5L
Diameter x Height (mm): 125 x 43, Reactor Size: 2L-5L. Heavy duty PTFE anchor made of 0.500 thick PTFE. Blade is shaped to mirror the contour of Chemglass cylindrical reactors. Designed for use with CG-2078 Chem-Stir 10mm stirrer shaft. The blade is secured to the stirrer via a PTFE pin. PLEASE NOTE: CG-2081-A-02 IS NOT RECOMMENDED FOR USE WITH BAFFLES OR THERMOCOUPLES.
Bellco Glass, Inc. Stainless Steel Over Head Drive Impeller Assembly , 6L Full Width
Manufactured from 316l stainless steel for standard bioreactor vessels. Use with over head drive motors. MADE IN THE USA. PADDLE L X W (IN): 3 X 6 3/4".
Bellco Glass, Inc. Over Head Drive Adj Paddle, 8-36L
Over head drive adjustable paddle 8-36l MADE IN THE USA.