Stirrer Accessories
Analytical Sales & Services Bearing Ring
This item has a minimum order quantity of 6 per supplier requirements. BEARING RING
Chemglass Life Sciences 19mm PTFE Stirrer Bearing, 45/50, #129 Body O-Ring, #020 Bushing O-Ring
Grease-Free PTFE stirrer bearing for use under moderate vacuum. The bearing consists of a PTFE standard taper body, PEEK (Polyetheretherketone) compression cap, PTFE Insert/bushing and a Nylon loosening nut. The PTFE insert/bushing provides only glass and PTFE contact with the reaction. Loosening nut above the standard taper inner joint allows easy and quick removal. Supplied complete with a Perfluoro o-ring on the body and a Viton o-ring on the bushing.
Chemglass Life Sciences 10mm Chem-Vac Stirrer Bearing, PEEK/PTFE Stabilizer, PTFE, 24/40 Joint Size
10mm Chem-Vac Stirrer Bearing, PEEK/PTFE Stabilizer, PTFE, 24/40 Joint Size. Chem-Vac PTFE stirrer bearing provides a VACUUM TIGHT FLAKE-FREE SEAL. Two versions of the bearing are available, the standard series for 2L and smaller vessel capacities and the stabilizer series that incorporates a PEEK/PTFE stabilizing bushing that is molded to the lower portion of the inner joint. The stabilizer greatly reduces stirrer shaft whip on larger vessels. The bearing consists of a PTFE standard taper body, Glass filled polypropylene screw cap, PEEK Compression spring, PEEK/PTFE sleeve and a glass filled polypropylene loosening nut. The polymer blend sleeve provides a long lasting seal for use up to 500 RPM. Loosening nut above the standard taper inner joint allows easy and quick removal. PLEASE NOTE: PTFE STIRRER SHAFTS ARE NOT RECOMMENDED FOR USE WITH THIS BEARING.
Chemglass Life Sciences Stirrer Bearing with side Hose Connection, PTFE, Complete, fits 10mm Shaft, 29/42 Inner Joint
Stirrer Bearing with side Hose Connection, PTFE, Complete, fits 10mm Shaft, 29/42 Inner Joint. PTFE stirrer bearing with a hose connection for vacuum or inert gas source on a single neck flask. Grease-free design has only glass and PTFE in contact with the reaction, and can be used under moderate vacuum applications. Bearing consists of a threaded glass adapter having the listed inner joint size, a saddle o-ring, a body bushing with a compression and locking nut, and a precision PTFE inner bearing. Saddle o-ring provides vacuum tight seal and is replaceable at a fraction of the cost of the entire bearing. Hose connection is 10mm at the largest serration. PLEASE NOTE: FOR USE ONLY WITH CG-2078 OR CG-2079 PRECISION GROUND AND POLISHED STIRRER SHAFTS.
Chemglass Life Sciences Stirrer Bearing, PTFE, Complete, fits 10mm Shaft, 24/40 Inner Joint
Stirrer Bearing, PTFE, Complete, fits 10mm Shaft, 24/40 Inner Joint. Grease-Free PTFE stirrer bearing designed for use in moderate vacuum applications. Bearing consists of a threaded glass adapter having the listed inner joint, a saddle o-ring, a body bushing with a compression and locking nut, and a precision PTFE inner bearing. The saddle o-ring provides only glass and PTFE contact with the reaction, while allowing for the vacuum tight seal. Design of the bearing permits replacement of the saddle o-ring at a fraction of the cost of the entire bearing. PLEASE NOTE: FOR USE ONLY WITH CG-2078 OR CG-2079 PRECISION GROUND AND POLISHED STIRRER SHAFTS.
Ace Glass, Inc. Bearing, Trubore, glass, 10mm, 24/40
10mm Trubore glass bearing with 24/40 standard taper joint. Bearing is for use with aluminum packing box in low positive pressure and vacuum applications. Using the graphite-impregnated PTFE packing and ACE Stir-Lube, pressures down to 7 microns have been obtained at 170rpm, using only a mechanical pump. Speeds over 1000rpm are not advisable due to heat generated. Indefinite packing life. Frequent tightening of the packing box is unnecessary once the packing has run in. The high vacuum lubricant trap adapter prevents lubricant from running into stirred material. Use with precision ground, 10mm stirring shaft.
Alkali Scientific High-Efficiency Erlenmeyer Shake Flask, PC, Flat Base, 2L, 4/Case, Plug Seal Cap
High Efficiency Erlenmeyer Flask With ISO9001&13485 certified, High Efficiency Erlenmeyer Flask are manufactured in 100,000 grade cleaning room with USP 6 grade raw materials. Material: PC Bottle & HDPE Cap & Nylon Handle, Vent caps with 0.2um hydrophobic filters for gas exchange without contamination. Product Feature: • There’s a scale made by injection molding on the flask body to facilitate observing the filled liquid volume.• Sterilized by E-beam, SAL=10-6.• Non-Pyrogenic, DNase/Rnase free.• Individually packaged in sterile bag. Application: Ideal for shaker culture applications. Tips：· Recommended volume :30-40% of the bottle volume;· Rotation speed suggestion: the starting speed is 75-125RPM, you can control the rotation speed according to the situation;· The liquid shake shaker should pay attention to the water level, the gas shake shaker should pay attention to the temperature
Uline Wheel Bearing For SpringLoaded
Wheel Bearing For Spring-Loaded Pallet Positioner - 20 X 47 X 14mm
Ace Glass, Inc. 10mm PTFE inner bearing, debris trap style
10mm self-aligning, lubricant-free PTFE Trubore bearing, debris trap style. Use with ACE polished stainless steel or glass 10mm O.D. stir shafts. Can achieve vacuum down to 1mm Hg. Multi-directional.
Ace Glass, Inc. 29/42 10mm straight adapter, glass only
29/42 10mm straight adapter, glass portion only, for use with self-aligning, lubricant free PTFE Trubore bearing or combination bearing / debris trap. Use with 10mm O.D. stainless steel or polished glass shafts.