Stirrer Accessories
Sigma Aldrich Fine Chemicals Biosciences Bio-PureTM pipetting reser
Biodegradable - Using a special additive to PET our reservoirs will safely degrade over timeTrough within a trough maximizes reagent recoveryPour-off spouts on all four corners and a wide base and reinforced sidewalls avoids spills and provides stabilitySterile
Waters Corp Insulating Spacer, Ceramic, 3.5 mm
This insulating spacer is designed for reliable performance. It is made of ceramic material and has a dimension of 3.5 mm. This spacer is supplied in packs of 5.<ul><li>Made of ceramic material</li><li>Measures 3.5 mm</li><li>Supplied in packs of 5</li></ul>
Bellco Glass, Inc. The Bellco Process Controlled Overhead Drive is a versatile direct-drive agitator for cell culture and most aseptic mixing applications. The Overhead Drives were developed to eliminate the problem of magnetic agitator decoupling often observed in large v
The Bellco Process Controlled Overhead Drive is a versatile direct-drive agitator for cell culture and most aseptic mixing applications. The Overhead Drives were developed to eliminate the problem of magnetic agitator decoupling often observed in large v
Arrow Engineering S-316-24 Type 316 Stainless Steel 24" Propeller Shaft
All Arrow Mixing Products' stainless steel mixer shafts are 3/8" dia. & made of 316 stainless steel. These quality mixer parts have a 5/16-24 external thread for easy assembly with all of our stainless steel propellers and couplings. (Note: propeller and coupling sold separately)
Chemglass Life Sciences Stirring Shaft, 10mm, Clockwise, Polished, Glass Agitator, Three Blade, 460mm OAL, Agitator OD 50mm, for use with 500mL Reactors
Stirring Shaft, 10mm, Clockwise, Polished, Glass Agitator, Three Blade, 460mm OAL, Agitator OD 50mm, for use with 500mL Reactors. Shaft is precision ground and polished to fit Chemglass's CG-2077-H, CG-2077-G and CG-2077-U style 10mm PTFE bearings. Designed to be used with cylindrical type reactors. The curved glass blades are spaced 120 apart and angled upward. PLEASE NOTE: STIRRER SHAFTS ARE DESIGNED FOR CLOCKWISE ROTATION.
Arrow Engineering S-316-18 Type 316 Stainless Steel 18" Propeller Shaft
All Arrow Mixing Products' stainless steel mixer shafts are 3/8" dia. & made of 316 stainless steel. These quality mixer parts have a 5/16-24 external thread for easy assembly with all of our stainless steel propellers and couplings. (Note: propeller and coupling sold separately)
Chemglass Life Sciences Replacement 19mm Stirrer Shaft, Reactor Size: 15L-20L, Fits Support Frame: CG-1965-X-150, Overall Length: 34.6"
Replacement 19mm Stirrer Shaft, Reactor Size: 15L-20L, Fits Support Frame: CG-1965-X-150, Overall Length: 34.6". Precision ground and polished stirrer shaft for use with Chemglass process reactors. Designed to utilize CG-2095 and CG-2096 PTFE agitators. Lower portion of stirrer shaft is sandblasted and has a 3/8¿ wide flat. REPLACEMENT STIRRER SHAFTS ARE FOR USE WITH MECHANICAL SEAL STIR BEARING ON LISTED SUPPORT FRAME.
Chemglass Life Sciences Stirring Shaft, 19mm, Polished, Chem-Stir, 3 to 12L Flasks, 610mm OAL, Complete with PTFE Nut and Bolt
Stirring Shaft, 19mm, Polished, Chem-Stir, 3L-12L Flasks, 610mm OAL, Complete with PTFE Nut and Bolt. A 19mm OD precision ground and polished stirrer shaft with our patented Chem-Stir blade attachment system. Shaft (C) has been manufactured with a ring at the lower end to permit attachment of the blade (B) with a PTFE nut (D) and bolt (A). Shaft is supplied complete with PTFE nut and bolt set. For use with PTFE bearings such as the CG-2086. Polished shaft will not cause abrasion to the sealing surfaces of the PTFE bearing, thereby allowing a vacuum tight seal. Uses the same PTFE nut and bolt blade attachment method as the CG-2084 ground shaft.PLEASE NOTE: STIRRER BLADES MUST BE PURCHASED SEPARATELY.THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF GLASS BEARING. FOR GROUND SHAFTS USED WITH GLASS BEARINGS SEE CG-2084.ALSO NOTE: 19MM SHAFTS HAVE A REDUCED DIAMETER TOP SECTION THAT IS 1/2"OD, PLEASE KEEP THIS IN MIND WHEN SELECTING THE PROPER SIZE COUPLING.