Microcentrifuges
Compact footprint centrifuges used for small sample sizes, such as microtubes. Ideal for microfilter cell separations and HPLC samples. Available as electronic or handheld manual units; may have digital interfaces and refrigeration capabilities.
Microcentrifuges are specifically designed to accommodate tubes that hold less than 5.0 mL. Although benchtop centrifuges can be fitted with rotors for microtubes, microcentrifuges usually have a smaller footprint, which makes for a less-crowded work area.
As with other benchtop centrifuges, these units can be ventilated (operated without temperature controls) or refrigerated. Most are sold with a rotor, although additional alternate rotors may be available.
RWD LIFE SCIENCE INC MICROCENTRIFUGE
M1324 microcentrifuge is a ventilated model, satisfying most of the common standard applications, Even at the highest speed, it can still work stably and quietly. Also, the compact-design microcentrifuge not only equips a standard 24-place quick-lock rotor (closed with only 1/6 turn) but also adapt PCR tubes and spin column, satisfying different customers’ needs.The microcentrifuge enables your centrifugation simple by providing 10 acceleration and deceleration ramps . Featured with 48 user-defined programs provide quick and convenient setting and parameter use.
Hettich Centrifuges MIKRO 185,(18) SpinCol,Bio,Package
Hettich MIKRO 185 Spin Column Package 18, (1) Centrifuge, (1) Fixed-angle Rotor, (18) Adapters 0.5mL, (1) Bio-containment Lid, Power: 100-120 V 1~/50-60Hz, Warranty: Five (5) years
Hettich Centrifuges MIKRO 220R,6x8 PCR Strips,Package
Hettich MIKRO 220R MICROLITER TUBE PACKAGE STRIP, (1) Centrifuge, (1) Fixed-angle Rotor, Power: 100-120 V 1~/50-60Hz, Warranty: Five (5) years
Hettich Centrifuges MIKRO 200R, 4 x 8 PCR strips
Hettich MIKRO 200R MICROLITER TUBE PACKAGE STRIP, (1) Centrifuge, (1) Fixed-angle Rotor, Power: 100-120 V 1~/50-60Hz, Warranty: Five (5) years
Hettich Centrifuges MIKRO 220, CryoTubes, Bio, Package
Hettich MIKRO 220 Cryo Tube Package, (1) Centrifuge, (1) Fixed-angle Rotor, (1) Biocontainment Lid, Power: 100-120 V 1~/50-60Hz, Warranty: Five (5) years
Revvity Health Sciences Inc Microcentrifuge Tube Rotor with Aerosol Tight Lid, 24 x 2 mL
Microcentrifuge Tube Rotor with Aerosol Tight Lid, 24 x 2 mL
Grainger Speed Control 115V AC 3 A Dial
The Grainger Speed Control is a 115V AC dial speed controller with a maximum load rating of 3 amps. It allows users to adjust the speed of single phase AC motors and other electrical loads by varying the voltage with a dial knob. The enclosure is made of plastic with screw terminal connections. Key features include overload and short circuit protection. It can be mounted on walls or panels. This provides variable speed control for applications like fans, pumps, conveyors, and other AC motor-driven equipment.
Sigma Aldrich Fine Chemicals Biosciences MC-12 HIGH SPEED MICROCENT Benchtop Laboratory Centrifuge | UNITS: 1 EA
The MC-12 HIGH SPEED MICROCENT is a compact, benchtop laboratory centrifuge designed for high-speed microcentrifugation applications. This microcentrifuge enables rapid centrifugation of microcentrifuge tubes and is well-suited for routine laboratory use.
Cole-Parmer Stuart Tube Rotator Microcentrifuge Tube Holder Disc, 46 tube capacity
Powerful, yet quiet, this tube holder is perfect for continuous use of applications.
Electron Microscopy Sciences Gusto High Speed Mini Centrifuge
This compact centrifuge is ideal for most protocols calling for fast spins (up to 12,500 rpm / 9,800 rcf) and quick spindowns. Useful for PCR, microfilter cell separation, clinical applications, and HPLC protocols. Operation is extremely simple for this high-level of sophistication. For duplicate spins, simply reload rotor and push Start. Designed with quick-spin option for commonly used 20-second spins. Includes a toolfree, quick-change rotor system. Safety features ensure the unit will not operate with an open lid, a jammed rotor or when out of balance. Efficiently designed for minimum bench top space.
ILEX LIFE SCIENCES LLC 24 x 12 mm Ossiform P3D Scaffolds, suitable for 24-well plates - gyroid structure, 300-400 micrometers porosity, bone-like 3D cell culture systems
Ossiform P3D Scaffolds are xeno-free, bioceramic scaffolds which provide a bone-like niche for in vitro and in vivo studies such as disease modeling, drug screening and bioengineering. The 3D printed scaffolds are developed to resemble native bone with respect to both physical and structural properties, such as high contents of β-tricalcium phosphate (β-TCP) and stiffness, as well as macro- and micro-porosities. The P3D Scaffolds are an easy plug-and-play solution for 3D cell culturing of bone harboring or bone related cell types. P3D Scaffolds are compatible with most common laboratory techniques and do not require major alterations of preexisting protocols and workflows. P3D Scaffolds provide you with a clinically relevant cell culture system of natural materials and customized structures which allow you to create predictive research models of human physiology and pathology.