Microcentrifuges
Compact footprint centrifuges used for small sample sizes, such as microtubes. Ideal for microfilter cell separations and HPLC samples. Available as electronic or handheld manual units; may have digital interfaces and refrigeration capabilities.
Microcentrifuges are specifically designed to accommodate tubes that hold less than 5.0 mL. Although benchtop centrifuges can be fitted with rotors for microtubes, microcentrifuges usually have a smaller footprint, which makes for a less-crowded work area.
As with other benchtop centrifuges, these units can be ventilated (operated without temperature controls) or refrigerated. Most are sold with a rotor, although additional alternate rotors may be available.
Thomas Scientific Mini Centrifuge with Purple Lid, with 2 rotors, 100-240V (US Plug)
Clik-N-Lok™ INSTANT rotor attachment Eight position microtube rotor Storage compartment for PCR rotor & 0.5ml adapters Near silent operation Decelerates in just one second Four position PCR strip rotor The labForce MiniMouse Mini Centrifuge is a personal centrifuge that virtually fits in the palm of your hand. Ideal for quick spin downs of microtubes and PCR tubes, it is extremely easy to use. Simply close the lid and the rotor instantly reaches 6,000 rpm. Open the lid, and the rotor quickly decelerates to a stop for removing samples. An increased capacity, eight-position microtube rotor is included and comes installed. Also included is a second rotor for 0.2ml PCR tubes and strips which is stored (together with the rotor removal key) in a convenient compartment on the bottom of the centrifuge. When the rotor is not in use, storage in this compartment prevents loss or misplacement of the rotor.
Alkali Scientific™ Hermle OLEUM Oil Testing Centrifuge, Z600-OL
The Hermle Z600-OL OLEUM Oil-Testing Centrifuge is our stand alone oil testing centrifuge for pear shaped or conical ASTM oil testing tubes. A 4-place swing out rotor reaches up to 3,000rpm, or 2,213 xg to determine the water content of your oil sample. The OLEUM is equipped with a maintenance-free induction motor, stainless steel chamber, motor driven lid lock, and active imbalance detection and shutdown. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.
Thomas Scientific 24-M Ambient High Speed Microcentrifuge, 115V
Each pack contains 10 preloaded tip carriers (96 tips in each carrier) for 10µl, and 200µl sizes. The 1000µl size contains 3 inner sleeves, with 4 preloaded tip carriers in each sleeve (70 tips in each carrier). The 1000µl must be loaded in Denville's special 70 hole rack. Clear, simple instructions are printed on each pack
Alkali Scientific MyFuge™ Mini Centrifuge, Purple Lid, with 2 Rotors, 100-240V (US Plug)
The MyFuge™ Mini Centrifuge is a personal centrifuge that virtually fits in the palm of your hand. Ideal for quick spin downs of microtubes and PCR tubes, the MyFuge™ is extremely easy to use. Simply close the Lid and the rotor instantly reaches 6,000 rpm. Open the Lid, and the rotor quickly decelerates to a stop for removing samples. An increased capacity, eight-position microtube rotor is included and comes installed. Also included is a second rotor for 0.2mL PCR tubes and strips which is stored (together with the rotor removal key) in a convenient comparent on the bottom of the centrifuge. When the rotor is not in use, storage in this comparent prevents loss or misplacement of the rotor.
Thomas Scientific Mini-Centrifuge Blue w/2 Rotors 120V
These mini-centrifuges are ideal for quick spin down of micro sample sizes. With a clear lid and electronic safety cut-off, samples can be safely observed at all times. The centrifuge quickly accelerates to maximum speed (6,600 rpm / 2,200 rcf) and stops within seconds while the motor mounting system provides quiet, vibration-free operation. All centrifuges include a round rotor with capacity for six standard microtubes (1.5ml to 2.0ml) as well as a strip tube rotor for 2 x 8 PCR strips or sixteen individual 0.2ml tubes. Additional adapters are also included for 0.4-0.5ml tubes. Rotors can be easily interchanged within a matter of seconds.
JDM LAB SOLUTIONS LLC MINI CENTRIFUGE 6 000
Mini Personal centrifuge, 6,000 rpm, smooth quiet operation, fits a variety tubes with included accessories
USA Scientific Inc Eppendorf Centrifuge 5425
Eppendorf Centrifuge 5425, non-refrigerated, with Rotor FA-24x2, rotary knobs, 120 V/50-60 Hz
Beckman Coulter Microfuge 20R w FA361.5
Microfuge 20R microcentrifuge, IVD, w/ FA361.5 fixed angle rotor, 120 V/60 Hz
ILEX LIFE SCIENCES LLC 24 x 12 mm Ossiform P3D Scaffolds, suitable for 24-well plates - gyroid structure, 600-800 micrometers porosity, bone-like 3D cell culture systems
Ossiform P3D Scaffolds are xeno-free, bioceramic scaffolds which provide a bone-like niche for in vitro and in vivo studies such as disease modeling, drug screening and bioengineering. The 3D printed scaffolds are developed to resemble native bone with respect to both physical and structural properties, such as high contents of β-tricalcium phosphate (β-TCP) and stiffness, as well as macro- and micro-porosities. The P3D Scaffolds are an easy plug-and-play solution for 3D cell culturing of bone harboring or bone related cell types. P3D Scaffolds are compatible with most common laboratory techniques and do not require major alterations of preexisting protocols and workflows. P3D Scaffolds provide you with a clinically relevant cell culture system of natural materials and customized structures which allow you to create predictive research models of human physiology and pathology.
Grainger Speed Control 115V AC 3 A Dial
The Grainger Speed Control is a 115V AC dial speed controller with a maximum load rating of 3 amps. It allows users to adjust the speed of single phase AC motors and other electrical loads by varying the voltage with a dial knob. The enclosure is made of plastic with screw terminal connections. Key features include overload and short circuit protection. It can be mounted on walls or panels. This provides variable speed control for applications like fans, pumps, conveyors, and other AC motor-driven equipment.
GRANT INSTRUMENTS Microcentrifuge/vortex mixer Combi-spin™ to 3500 rpm, inc. rotors for 12 x 1.5ml and 12 x 0.5ml plus 12 x 0.2ml
The Centrifuge/Vortexer Combi-spin PCV-2400 is specially designed for life science research. It can be used in biochemical, microbiological and industrial biotechnology laboratories.A cost-effective fixed-speed combined centrifuge/vortex mixer for combined or independent centrifuge and mixing applications of microtubes and 0.2 ml microtube strips in low volume applications.Centrifugation 2800rpm at 50Hz and 3500rpm at 60Hz.The vortex cup emerges through an opening in the closed lid, enabling individual tubes to be mixed while a full load of tubes is spinning.Very simple to operate - use the left-hand button to select continuous or short spin. A safety interlock stops the rotor when the lid is opened to ensure you and your workplace remain safe.The Combi-spin is supplied as standard with two interchangeable rotors for 12x1.5ml and 12x0.5ml + 12x0.2ml microtubes.
Azzota Corp Mini Centrifuge, Come With Exchangeable Rotors, One For 1.5 Ml Microtubes And One For 0.2 Ml Pcr Strip Tubes. Two Adapters, One Is 0.5 Ml And Another Is 0.2 Ml. Speed: 10000Rpm (2200Xg)
Mini Centrifuge, Come with exchangeable rotors, one for 1.5 ml microtubes and one for 0.2 ml PCR strip tubes. Two adapters, one is 0.5 ml and another is 0.2 ml. Speed: 10000rpm (2200Xg)
Electron Microscopy Sciences EMS MyFuge™ Mini Centrifuge with Blue Lid, 240 V
The MyFuge Mini centrifuge is a personal centrifuge that virtually fits in the palm of your hand. Ideal for quick spin downs of microtubes and PCR tubes, it is extremely easy to use. Simply close the lid and the rotor instantly reaches 6,000 rpm. Open the lid, and the rotor quickly decelerates to a stop for removing samples.
An increased capacity, eight-position microtube rotor is included and comes installed. Also included is a second rotor for 0.2 mL PCR tubes and strips which is stored (together with the rotor removal key) in a convenient compartment on the bottom of the centrifuge.
Hettich Centrifuges MIKRO 200R, (20) Cryo, Package
Hettich MIKRO 200R Cryo Tube Package, (1) Centrifuge, (1) Fixed-angle Rotor, Power: 100-120 V 1~/50-60Hz, Warranty: Five (5) years