Microscope Accessories and Replacement Parts
General accessories and parts for use with microscopes. Products include lens oil, lens cleaner, slide dispensers, microscope covers, vessel holders, light cubes, and flow cells.
Many parts of your microscope can be updated or replaced including microscope lamps, lenses, and eyepieces. Replacement lamps, light sources, and power cords can extend the working lives of your microscopy equipment. New or replacement objectives and lenses can help increase the total magnification available with your microscope.
Add greater magnification or exchange your eyepiece for one with a reticule to more easily estimate the sizes of the items being viewed.
Replace or update your mechanical stage or clamps or add cell culture vessel adapters to facilitate specimen positioning.
Condensers can also be replaced, and conversion kits are available to add phase contrast, polarization, fluorescence, or other capabilities to your current system.
Some microscopes can be adapted for use with still or video cameras. Look for cameras and adapters designed for your specific microscope brand. Film and documentation-related products may also be available to support your record-keeping.
Temporary, semi-permanent, and more long-term slide storage options include:
- Slide racks that securely hold slides during staining procedures
- Folding fiberboard or plastic slide holders with horizontal indentations that keep microscope slides in place
- Slide storage boxes with vertical dividers; made from fiberboard, plastic, and wood and available in multiple sizes
- Slide holders and mailers for transporting slides safely
- Slide storage systems and cabinets for large quantities of slides or archival storage
Electron Microscopy Sciences Matthews Spray Droplet Graticle NE30, 23mm
For size and distribution assessments of aersol droplets. Used in conjunction with a 40X Microscope for direct measurements of droplets from 50-400 micron diameters. The actual pattern sizes are 50, 100, 200, and 400 microns. W.H.O. (Details on Request) and G.A. Matthews. Imperial College.
Size: 23 mm
Abcam TBB, casein kinase-2 (CK2) inhibitor, 10MG
MW 434.71 Da, Purity >98%. Selective, cell-permeable casein kinase-2 (CK2) inhibitor (IC₅₀ = 0.5 μM). Acts in an ATP/GTP competitive manner. Induces apoptosis.
The product is subject to the following: Abcam Restricted Use Statement
Electron Microscopy Sciences CoverWell™ Perfusion Chamber 8 well with 150 µl volume
CoverWell Perfusion Chambers allows up to 16 different specimens on one coverglass. "Press-to-Seal" covers form water-tight, multiwall cell incubation or cytochemistry chamber when pressed to coverslips or microscope slides. Reagents can be quickly added and removed through dual access ports (1.5 mm Dia) without disturbing or cross-contaminating specimens in adjacent wells. Chambers are removable for permanent mounting of specimens. CoverWell chambers are made from medical grade silicone bonded to clear, UV transparent plastic.
Volume: 150 µl
Electron Microscopy Sciences Scale with Cross Line Microscope Graticle NE7, 27 mm, 10 mm with 0.1 mm spacing
Used as a horizontal and a vertical scale, they are especially useful when interested in measurement in different axis. Horizontal micrometer scale 10mm long with crosslines at 0.1mm spacing. Surface chrome image.
Size: 27 mm
Divisions: 10 mm with 0.1 mm spacing
Surface: Chrome image
Ibidi USA Magnetic Lid for µ-Dish Microscopy Rack
Lid fixed with magnetic positioning for additional stabilization. Compatible with the µ-Dish Microscopy Rack. Includes 1 lid for µ-Dish 35mm, High. aluminum, black, Ø 51 x 10.95 mm
Electron Microscopy Sciences FIB Sample and Grid Holder, Pin, 1"
Holds a FIB sample mounted on a standard 25 mm (1") pin stub for FIB milling and lift out procedures. Can also be used to hold FIB grids of the same thickness to mount the prepared lamellae on an FIB grid for TEM imaging. This cost-effective and versatile holder is suitable for all FIB/SEM systems which accept pin mount holders, including the FEI, ZEISS and Tescan systems. For the JEOL and Hitachi systems, use a pin mount adapter. Convenient brass thumbscrews make loading and unloading easy.
Overall Dimensions: 50 x 29 x 13.5 mm (2" x 1⅛" x ⅝").
Pin: Standard 3.2 mm ( 1/8").
Material: Vacuum grade aluminum with brass screws.
Leica Biosystems SLIDE WHTE SNOWCT CORN CS/1440
Snowcoat Clipped Corner Slides are clipped at 45° angles to help reduce glass breakage and fragmentation when loaded into slide printers. These slides have been optimized for use with the Leica printer.
Electron Microscopy Sciences TEM Round Grid Mats
White silicone rubber mats, with numbered compartments. Good for organizing grids. They will not slide or jump between compartments. Also ideal for staining grids. Easy to pick up grids without damaging forcep tips.
Electron Microscopy Sciences Standard Pin SEM Stub Slotted 1/2" Head with 8 mm Pin, Aluminum, 1/8" Pin diameter
Slotted head pin stub mounts with tappered pin ends are for use with Cambridge, Phillips, Camscan, B&L, Etec, Zeiss. Made from ultra-pure aluminum polished finish with a smooth and luster surface.
Head: 1/2"
Pin height: 8 mm
Pin diameter: 1/8"
Electron Microscopy Sciences PremaDisk Diamond Grinding Disc SH Hard Bond, 15 µm Particles, 250 mm diameter
PremaDisk Flexible Diamond Grinding Discs offer superior surface finishes that are usually only seen in lapping processes.
The SM disc is a medium-hard resin bond base for fine grinding and polishing of metals, ceramics and glass.
The SH disc is a hard resin bond base for applications where a very sharp edge must be maintained on the workpiece.
Both discs increase productivity by combining optimum surface quality, removal rates, and tool life in the same process.
Particles: 15 µm
Diameter: 250 mm
Electron Microscopy Sciences Poly-View for Negatives, 3- 1/4 x4"
Completely transparent polyethylene storage sheets fits all U.S. standard 3-ring binders: 8 1/4"x1 1/4". Convenient. Offers good protection for your valuable negatives and prints.
Size: 3-1/4 x 4"
Electron Microscopy Sciences Gilder Thin Bar Hexagonal 200 mesh Nickel Grid
Thin Bar Grids have been developed using a new technology to produce ultra-fine grids with thinner cross bars than regular grids. The result is equally firm specimen support but with 40% more open area for viewing maximum specimen surface area. 3.05 diameter, 0.8 mil thickness.
Grid: Nickel
Pitch: 125 µm
Hole: 113 µm
Bar: 12 µm
Electron Microscopy Sciences Formvar Support Film 5-6 nm thick on Square 400 mesh Nickel Grid
Support Film on grids has become a main product line for us since the demand for high quality coated grids has increased. To make your microscopy work easier and to save you a great deal of time we offer you a complete line. All of our coated grids are optically checked followed by batch testing in the EM. Packed in grid storage box. Standard coating is 5 to 6 nm thick.
Grid: Nickel
Electron Microscopy Sciences Stage Micrometer S22, Vertical scale Scale, 2 mm Length
Stage graticules are used for the routine calibration of eyepiece patterns, particularly when alternating between objectives on one microscope or when using the same graticule in different microscopes. Their robust construction makes them ideal for student use and for instructional purposes. The scale or grid is centered on a glass disc mounted in a black anodized aluminum slide 75 mm x 24 mm x 2 mm thick.
Scale: Vertical scale
Length: 2 mm
Divisions: 200 each 0.01 mm
Electron Microscopy Sciences EMS Platinum Aperture with 50 µm hole, 0.165 mm thick
Platinum apertures are easily cleaned by either an aperture flamer or over a bunsen burner in the open air. We maintain a wide variety of Platinum Drilled Apertures in stock with different configurations suiting all of your needs. Nominal hole diameter: +/- 1 micron. Disc diameter: +/- 10 microns. Disc thickness: +/- 10 microns
Size: 50 µm
O.D.: 4 mm
Thickness: 0.165 mm