Clamps and Supports
Chemglass Life Sciences Clamp, Column, Large, 121mm to 140mm Clamping Range
Clamp, Column, Large, 121mm to 140mm Clamping Range. Ideal for Chromatography columns and large cylindrical glassware, the column clamp is constructed of stainless steel. Large, flat thumb screw on the worm drive permits tightening and removing.
Chemglass Life Sciences Sleeve, Clamp Replacement, Small Three-Prong, Fiberglass
Sleeve, Clamp Replacement, Small Three-Prong, Fiberglass. Replacement sleeves for two and three prong clamps. Made of vinyl or fiberglass.
Chemglass Life Sciences Glas-col Mantle Extension Support for Series inMin, Mantle Size 1000mL, 194mm ID
Glas-col Mantle Extension Support for Series inMin, Mantle Size 1000mL, 194mm ID. Glas-Col extension support for use with a smaller Series M mantle. Attached to a stable ring stand or distillation rack, the support can be adjusted to any convenient height. Support is painted gray and has a 6in long, 1/2in O.D. rod.
Chemglass Life Sciences O-Ring Joint, 20mm ID, 25mm Tube OD , O-Ring Size: 214, Clamp Size: 35
O-Ring Joint, 20mm ID, 25mm Tube OD , O-Ring Size: 214, Clamp Size: 35. Joint has an o-ring groove to accept the listed o-ring size. Provides for a grease-free, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.
Chemglass Life Sciences 150mm Quick Release Clamp, PTFE Coated
150mm Quick Release Clamp, PTFE Coated. Similar to CG-141 but with the entire clamp PTFE coated for chemical durability.
Chemglass Life Sciences Clamp, Safety, Adjustable, Fits Joint Sizes 45/35 & 45/50
Clamp, Safety, Adjustable, Fits Joint Sizes 45/35 & 45/50. The safety clip is a two piece adjustable clamp used to secure standard taper joints. Made of polyoxymethylene, the clip has excellent chemical resistance. They will not corrode or scratch the glass. Can be used to 150°C. Sold in packages of 10. PLEASE NOTE: THESE CLAMPS CAN BE USED WITH STANDARD TAPER JOINTS THAT HAVE A CG-136 STYLE PTFE SLEEVE BETWEEN THEM.
Chemglass Life Sciences Clamp, Keck, Orange, Standard Taper, Fits Joint Sizes 35/20 & 35/25
Clamp, Keck, Orange, Standard Taper, Fits Joint Sizes 35/20 & 35/25. Made of Delrin, these clamps are non-corrosive and will not scratch glass. Can be used to 140 C. Color coded for easy identification. SOLD IN PACKAGES OF 10.
Chemglass Life Sciences Clamp, Safety, Adjustable, Fits Joint Sizes 34/28 & 34/45
Clamp, Safety, Adjustable, Fits Joint Sizes 34/28 & 34/45. The safety clip is a two piece adjustable clamp used to secure standard taper joints. Made of polyoxymethylene, the clip has excellent chemical resistance. They will not corrode or scratch the glass. Can be used to 150°C. Sold in packages of 10. PLEASE NOTE: THESE CLAMPS CAN BE USED WITH STANDARD TAPER JOINTS THAT HAVE A CG-136 STYLE PTFE SLEEVE BETWEEN THEM.
Chemglass Life Sciences Clamp, Pinch, Stainless Steel, #28
Clamp, Pinch, Stainless Steel, #28. Made entirely of stainless steel. Part numbers CG-150-01 and CG-150-03 are supplied WITHOUT a screw type locking device. All other sizes have the screw type locking device.Note: The size #102 Stainless Steel pinch clamp is available on a special order basis.
Chemglass Life Sciences Clamp, Keck, Yellow, Standard Taper, Fits Joint Sizes 14/20 & 14/35
Clamp, Keck, Yellow, Standard Taper, Fits Joint Sizes 14/20 & 14/35. Made of Delrin, the clamp is non-corrosive and will not scratch glass. Can be used to 140 C. Color coded for easy identification. SOLD IN PACKAGES OF 10.
Chemglass Life Sciences Clamp, Horseshoe Style, #65
Clamp, Horseshoe Style, #65. Horseshoe shaped corrosion-resistant steel clamp for use with spherical ball and socket joints. Clamp has two machine bolts and thumbscrews 180º apart to apply uniform tension. NOTE: NOT FOR USE WITH CG-124 O-RING JOINTS.
Brookfield Engineer Labs Quick Action Lab Stand
The Quick Action Lab Stand is perfect for busy lab environments, especially those with multiple operators or multiple samples. This stand is available as an option for the Dial, DVE, DV1, DV2T Viscometers and DV3T & DVNext Rheometers.
STEMCELL Technologies EasySep™ EasyStand™ with Magnet, Size: 1 Unit
The EasySep™ EasyStand™ facilitates the separation of one or more samples at one time. Each EasySep™ EasyStand™ can hold a single EasySep™ Magnet (Catalog #18000), and a simple system links up to 6 individual EasySep™ EasyStands™ together. After each round of magnetic separation, the supernatants from all samples are poured off simultaneously into the receiving tubes.
Chemrus Inc REACTION BLOCK FOR HOLDING MULTI-FLASKS
The anodized reaction block provides a safe and effective solution for replacing existing oil bath and heating mantles. The block simultaneously holds 7 Liu Flasks (3 x 60 mL, 3 x 120 mL, 1 x 250 mL) and 6 vials (40 mL) to perform multi-flask reactions without the use of clamps. The reaction block fits onto the circular top of the hot plate stirrer with a 135 mm diameter. The wells provide space for inserting the thermometer and temperature sensor.