Clamps
Adjustable devices designed to securely hold two objects together or to hold an object in place; used with standard-taper and ball-and-socket joints, glass and tubing assemblies, and with ring stands. Available as plastic joint clips, stainless steel pinch clamps, and taper clips.
A laboratory clamp is an essential piece of equipment used to support and secure labware and other laboratory apparatus such as flasks, reaction vessels, tubing, thermometers, probes, columns, funnels, and overhead stirrers.
Some laboratory clamps consist of a shaft and boss head, secured with hand-tightened thumbscrews, knurled nuts, or wingnuts onto a supporting rod, stand or scaffold. They may also include two- or three-pronged, adjustable closing jaws designed for gripping objects safely and securely.
Laboratory clamps are constructed of metals such as stainless steel, nickel-plated zinc, plated brass or diecast aluminum alloy for enhanced chemical, heat, and corrosion resistance. However, some components such as the adjusting screws may be made of plastic, and the prongs may also be lined or covered with cork, plastic, glass-fiber, or rubber for enhanced grip with minimal damage or breakage.
Laboratory Clamp Styles and Designs
• Universal, general-purpose clamps that are fully adjustable for accommodating and securing a wide range of items of different sizes such as columns and thermometers
• Retort clamps for securing round-bottom flasks and similar glassware
• Fork clamps for securing and supporting cone-and-socket ground glassware joints
• Three-prong extension clamps, sometimes available with spring-loaded jaws, for holding irregularly shaped or outsized objects
• Specialized clamps for securing burettes and condensers or reaction vessels
• Chain clamps, which incorporate a circular, adjustable chain loop to hold cylinders and beakers
Chemglass Life Sciences Clamp, Reactor Support, 60mm
Clamp, Reactor Support, 60mm. Similar to CG-1947, support clamp is designed to fit just below the flange of all Chemglass Reactors and permits Reactor lid to be detached without removing the Reactor body from the support clamp. Improved clamp is hinged on one side to swing open and allow complete access to install/remove reactor while clamp is still attached to lattice or benchtop support stand. Removable tightening knob holds Reactor secure. Clamps are constructed of stainless steel with a 1/2" OD X 9.5” long extension rod for connection to lattice and benchtop support stands. The inner portion of the clamp is lined with a high temperature red silicone rubber to prevent direct contact between the stainless steel and glass Reactor.PLEASE NOTE: IN ADDITION TO USING A CG-1947-A CLAMP, ALL REACTORS SHOULD BE SUPPORTED FROM BELOW USING THE CG-1948 SUPPORT RING.
Chemglass Life Sciences Clamp Holder, All-Position
Clamp Holder, All-Position. Double swivel design allows clamp holder to adjust at any angle in any plane. Holders are 90° to each other, joined by a right angle connector, allowing 360° rotation. Outside adjustment screws permit close proximity between items being held. Maximum rod grip size is 3/4” (19mm).
Chemglass Life Sciences Clamp, Two-Prong Swivel, Medium
Clamp, Two-Prong Swivel, Medium. Single adjustment clamp with shaft wing nut to allow clamp jaw movement through 360°. Rod holder grips up to 3/4” (19mm) diameter. The medium clamp has a 1 1/2” (38mm) maximum grip size with a 1/2” (13mm) O.D. extension arm. The large clamp has a 2 1/2” (64mm) maximum grip size with a 5/8” (16mm) O.D. extension arm. Complete with removable vinyl and fiberglass covers for easy cleaning.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Fitting, Nylon, Sanitary Clamp with White Knob; 3/4""
This clamp is compatible with ASME-BPE and BPSA standard nonmetallic and stainless steel flange ferrules. The lightweight design puts less stress on your system
Chemglass Life Sciences Clamp, Three-Prong Extension, Large, Dual Adjust, 10.75in OAL
Clamp, Three-Prong Extension, Large, Dual Adjust, 10 1/2in OAL. Nickel-plated zinc alloy clamp has high tensile strength and corrosion resistance. Fully enclosed stainless steel springs provide smooth operation. Three-prong clamps are available in single and dual adjustment. The small clamp has a 1¿ (25mm) maximum grip size with a 1/4¿ (6mm) O.D. extension arm. The medium clamp has a 1 1/2¿ (38mm) maximum grip size with a 1/2¿ (13mm) O.D. extension arm. The large clamp has a 2 1/2¿ (64mm) maximum grip size with a 5/8¿ (16mm) O.D. extension arm. Complete with removable vinyl and fiberglass covers for easy cleaning.