Core Samplers
MicroSampler
The MicroSampler has especially been designed for the sampling of small quantities of powder Volumes of 0 2 ml 0 5 ml 1 0 ml 2 0 ml 5 0 ml and 10 ml can be sampled easily quickly and cleanly from different sampling depths from sacks or containers The tips of the MicroSampler are interchangeable This means that tips with different volumes can be used
Core Sampler
The two-part stainless steel core auger enables the sampling of poorly flowing bulk solids that easily jam or stick The core drill can be easily dismantled for quick and thorough cleaning
Sampler Tubus
Sampler for pourable bulk goods up to approx 1 cm in diameter This makes it possible for example to remove hazel nuts blends of tea grain or similar items from large sacks
Sampler StickProof
Sampler for powder in the pharma area made of stainless steel AISI 316L material 1 4404 The especially slender tip can be inserted easily and deeply in order to take the sample The conical inlet of the tip allows the collection of either very small or larger quantities StickProof is constructed in one piece without edges grooves or crevices for perfect and easy cleaning The sample can be filled directly into the sampling bag from the outlet end Fasten the bag with a sturdy clamp
Sampler Tubus
Sampler for pourable bulk goods up to approx 1 cm in diameter This makes it possible for example to remove hazel nuts blends of tea grain or similar items from large sacks
Sampling Tube, M12 Thread, 3/8" OD Tubing, 212.73mm Immersion Length, 90 Degree 3/8" Hose Barb
Fixed height sampling tubes for 3L bioreactors.Tubing is 3/8-inch OD. Stainless steel components manufactured from 316L with an electropolished surface finish of 20Ra or better.
Ice borer
Sampler for deep-frozen products in the food and luxury items sector and for semi-solid substances The very robust hollow drill cuts quickly into the sample material with its sharp sawing crown A sample cylinder (cross-section sample) can be cut out The ice drill can be mounted on your standard commercial drilling machine The core bit drills quickly and easily down to the desired depth in the frozen material This makes it possible to cut a representative core sample from all layers of the frozen medium without expending any great effort Drilling core samples can be taken from a drilling depth of up to 100 or 200 mm depending on the design The ejector makes it easy to release the sample from the drill head
Cole-Parmer Raven Environmental B-10104-16-REDESIGNED Coretaker Polycarbonate Sludge Sampler, 16-ft
This sampler is ideal for direct measurement of sludge blanket thickness by core sample extraction. It floats for easy retrieval, and there arent any threaded couplers, since it uses a Slip-Loc quick-disconnect design. It comes with a lifetime, no breakage guarantee.