Datalogger Accessories
Accessories and replacement parts designed for processing data from data logging devices. Products include software, power supplies and batteries, USB docking stations, temperature probes and sensors, interface cables, and alarm systems.
Data logger accessories include items used to enhance the capabilities of the devices or replacement sensors and other parts. Although most data loggers come complete with any necessary parts and software, accessories and replacement parts are often also available.
Data logger accessories may include data processing and statistical software, power supplies or batteries, new or replacement probes or sensors, interface cables, alarm systems, and other products that enhance the usability of the data logger.
Cole-Parmer Fischer Technology 604-175 Probe for Inside measurements, 0 to 40 mils, FGABI1.3-150, for models Deltascope FMP10 & Dualscope
Accuracy: 0.5 m up to 50 m; < 1% above 50 m. Measuring method: Magnetic induction. Display: 240 x 160 pixels.
Cole-Parmer General Purpose RTD Probe, 100 Ohm, 5-ft Coil Cable; 18" L
Maximum error for probe assembly is 1.1C + 0.12% of reading below 300F, 0.35% of reading above 300F. Alpha coefficient is 0.003850 //C (DIN IEC 751). Resistance at ice point (0C) is 100 . Note: Time constant is the time required to reach 63.2% of the new reading. To determine how long it will take to reach 99% of the new reading multiply the time constant by five. Note: the temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220F (104C); PVC handles are rated to 200F (93C); Stainless Steel handles are rated at 450F (232C); Mini Connectors are rated to 392F (200C).
MSC SPI 11-967-7 76" SPC Cable with Control Box For Use with Absolute Digital Calipers, Bore Gages, Indicators & Micrometers
SPI 11-967-7 76" SPC Cable with Control Box For Use with Absolute Digital Calipers, Bore Gages, Indicators & Micrometers
Chemglass Life Sciences PT100 Sensor, Constructed with Shielded Cable, the Lemo Connector Provides an Area for a Ground Connection, PFA Coated, 1/4" OD x 22" Long, Style "B"
PT100 Sensor, Constructed with Shielded Cable, the Lemo Connector Provides an Area for a Ground Connection, PFA Coated, 1/4" OD x 22" Long, Style "B". PT100 RTD temperature sensor is for direct insertion into flasks and process reactors using any O-Ring style compression adapter, such as the CG-1042-E. Probes are constructed using shielded cable to ensure a clean signal. Style ¿B¿ has a Lemo Connector direct wired to a 12 foot lead and is for use with all Huber circulators permitting process temperature control based on the contents of the reactor. Sensor is constructed using GREEN shielded wire/cable. Lemo connector can be used as a ground for the probe using an optional grounding clip and wire. An adapter having a female Lemo connector to the 2-blade mini plug is available to allow use of the ¿Style B¿ sensors with equipment having this connection.
Grainger Flex Metal Conduit Steel Trd Sz 3/4in
The AFC Liquid Tight Flex Metal Conduit is a flexible metal conduit with a liquid tight PVC jacket. It is made of galvanized steel and has an operating temperature range of -20°F to 167°F. The conduit has a sunlight resistant and oil resistant jacket and is UL listed. It comes in 10 foot lengths in trade sizes 3/8 inch to 4 inch. The conduit allows for bends while maintaining its liquid tight properties. It can be used for protection of wires and cables in wet or corrosive environments. The PVC jacket resists oils, acids, and sunlight exposure.