Workstation and Task Lighting
Ushio America, Inc. HALOGEN PROJECTOR LAMP 12V 10
This item has a minimum qty of 8 per supplier requirements.
HALOGEN PROJECTOR LAMP 12V 10
Bulbman Inc Osram ENX 54984 Tungsten Halogen Bulb, 360 Watt, 82 Volt
Osram ENX: The Osram ENX is a 82 volt (82V) 360 watt (360W), tungsten halogen, low to medium voltage with reflector. Typical lifetime is 75 hours. This lamp has a MR16 reflector with GX5.3 bi-pin base. This item is made by Osram, but has alternative part numbers: 54984 and ENX 82V-360W.
Bulbman Inc Ushio G4T5, Germicidal Fluorescent Lamp Miniature Bi-Pin, Clear, 4 Watt
Ushio G4T5: G4T5 - 4 WATT T5 GERMICIDAL BULB G5 BASE - 4 Watt T5 Clear Germicidal Fluorescent Lamp Miniature Bi-Pin (G5) Base 6.0" Maximum Overall Length, 6,000 Average Rated Hours. Spectral UV 253.7NM *These lamps are very dangerous, use only in fixtures which provide adequate protection. Avoid exposure. Ultraviolet radiation is harmful to the skin and the eyes and can cause serious skin burns and eye injury either from direct or reflected radiation. To reduce the risk of personal injury, install only in a fixture which provides adequate protection to area occupants. This bulb should not be used for illumination purposes. Do not operate this bulb without personal protective equipment, hand and eye protection should be worn at all times when handling.
Bulbman Inc F8T5BLB BLACKLIGHT 8W 12IN
Halco F8T5/BLB: Linear Fluorescent Lamp, Bulb Shape T5, Bulb Base Type Miniature Bi-Pin (G5), Max. Overall Bulb Length 12 In., 8.0 Watts, Blacklight Blue, Party Lights, Average Bulb Life 5000 hr., Bulb Technology Fluorescent, Bulb Type Linear, Light Bulb Dia. 5/8"
Bulbman Inc OSRAM EFN: 64615 MR16
Osram EFN: 64615 75 watt, 12 volt, GZ6.35, 2 Pin Base, MR16 Xenophot Medical Stage Lamp, Original Xenophot Lamp. Used in medical, endoscopic, stage, and studio lighting
Bulbman Inc Bulk Quantity, 10 Osram 54842 EKE, 150 watt
Bulk Qty. 10 Osram 54842 EKE: EKE is a halogen specialty light bulb. The EKE specification include: 21 volt 150 watt 200 hour rated life CC6 filament vertical (plus or minus 45 degrees) base down operating position MR16D quartz glass dichroic reflector and GX5.3 bi-pin base. The EKE is used in medical / scientific microscopes photo printers and projectors. The EKE is a possible substitute for ANSI ENB. Possible substitute: EJV (25 hour life more heat).
HEPATOCHEM EvoluChem LED PF series LED 440 nm for photochemistry Dimmable 110V
The EvoluChem™ LED spotlights are designed specifically for photocatalytic, photochemistry or photobiology applications. They fit the PhotoRedOx Box™ Single HCK1006-01-016, PhotoRedOx Box™ Duo HCK1006-01-023, PhotoRedOx Box™ TC HCK1006-01-025 and PhotoRedOx Box™ UV/Vis HCK1022-01-001. Note that LEDs lower than 365 nm work only with the PhotoRedOx Box™ UV/Vis. They are designed to irradiate all samples with maximum efficiency compared to higher power LED light sources from the competition. They are more than 20 specific wavelengths ranging from 254 nm to 808 nm. This LED light wavelength is 440 nm with an irradiance of 326 mW/cm2 at 2 cm. The beam angle is 25 Degrees. The intensity can be controlled by an external dimmer or by the PhotoRedOx Box™UV/Vis HCK1022-01-001. You may need to order a power cord HCK1006-01-034
Cole-Parmer Meiji Techno MA570 Replacement Bulb for item numbers, 48404-20, -25; 6 V, 10 W
Change your scope's capabilities or keep it operating smoothly with these parts and accessories.
Perkin Elmer US LLC Antimony (Sb) System 2 Electrodeless Discharge Lamp
System 2 Electrodeless Discharge Lamp for the detection of elemental Antimony (Sb). Note: PinAAcle™ instruments require the purchase of an EDL driver assembly, part number 03030997, for each of the lamp positions to be used. Electrodeless Discharge Lamps for greater brightness (EDLs) are typically much brighter and, in some cases, provide better sensitivity than comparable HCLs. EDLs are preferred for certain volatile elements. They offer better precision and lower detection limits for analyses that are “noisy” due to weak hollow cathode emission. Electrodeless Discharge Lamps (EDLs) are designed to be physically interchangeable with Intensitron Hollow Cathode Lamps. Their power supplies are built into all the PinAAcle™ series of atomic absorption spectrometers. Use of EDLs with those instruments requires only the purchase of an EDL driver assembly for each of the lamp positions to be used.