Turbidity Measurement
Med Vet International Standard Bore "T"-Port Extension, J0467F
Ultrasite female luer lock needle free. Spin male luer lock. Latex injection port. 7.5" length (19.1cm). 1.3ml priming volume. Slide clamp.
Hach Company MP-6 Portable Package
MP-6 Portable Meter Essentials PackageIncludes meter-field case-pH buffers (50 mL each)-conductivity standards (50 mL each)-TDS standard (50 mL)-and user manual
Leica Biosystems Leica ChromoPlex III Triple Detection Kit for BOND RX/RXm (100 tests)
ChromoPlex III Triple Detection RUO is a three-plex chromogenic IHC detection kit designed for automated staining on BOND RX and RXm platforms. The kit simplifies multiplex workflows by combining pre-optimized reagents and protocols to visualize up to three markers on a single tissue section.
- Enables three-plex chromogenic detection on a single tissue section.
- Pre-optimized reagents and protocols to reduce assay variability.
- Biotin-free polymeric HRP and polymeric AP detection chemistry.
- Includes stable brown, red, and green chromogens for distinct staining.
- Configured as 16 reagent containers organized into two trays.
- Supplies sufficient reagents for 100 tests per kit.
- Designed for automated use to minimize hands-on time.
- Intended for research use only.
Hach Company Xenomax TSS-FVS Filter 47mm
Xenomax TSS-FVS Filter 47mm-100/pkXenomax TSS-FVS Filters are specifically designed to ensure compliance with the filter preparation requirements of Standard Methods 2540 D and Standard Methods 2540 E (Fixed and Volatile Solids Ignited at 550 C) Independent 3rd party evaluation of Xenomax and 934-AH filters in both methods give demonstrably equivalent results In addition these 1 5 m binder-free fast flowing fine porosity borosilicate glass microfiber filters have been optimized for better wet strength/handleability and high temperature (550 C) blank stability FVS Filters are available in popular diameter sizes and ready for use in a wide variety of labware including Buchner funnels and Gooch Crucibles 934-AH is a registered trademark of Whatman Inc /GE Healthcare
Hach Company Xenomax TSS-FVS Filter 21mm
Xenomax TSS-FVS Filter 21mm-100/pkXenomax TSS-FVS Filters are specifically designed to ensure compliance with the filter preparation requirements of Standard Methods 2540 D and Standard Methods 2540 E (Fixed and Volatile Solids Ignited at 550 C) Independent 3rd party evaluation of Xenomax and 934-AH filters in both methods give demonstrably equivalent results In addition these 1 5 m binder-free fast flowing fine porosity borosilicate glass microfiber filters have been optimized for better wet strength/handleability and high temperature (550 C) blank stability FVS Filters are available in popular diameter sizes and ready for use in a wide variety of labware including Buchner funnels and Gooch Crucibles 934-AH is a registered trademark of Whatman Inc /GE Healthcare
Hach Company TU5300sc LR Laser Turb-EPA
TU5 Series TU5300sc Low Range Laser Turbidimeter-EPA VersionIncludesTU5300sc Turbidimeter-User Manual-Wall Mount-Vial Replacement Tool-Screw Set-Drying Cartridge-Flow Regulator-Service Bracket
Hach Company TL2360 LED Turbidimeter, ISO, 0-10000 NTU
The new TL23 Series laboratory turbidimeters blend trusted technology and improved features to simplify testing in the most demanding wastewater and industrial applications.
MSC GF Gage Truncated Taperlock Thread Gage, 1-1/2-12, 3A, Steel, 1 ea
This truncated taperlock thread gage is a high-precision tool designed for checking thread size and fit. It provides reliable measurements for 1-1/2-12 threads with a 3A classification, ensuring consistency in threaded components.
- Constructed from durable steel for long-term wear resistance
- Features a double-ended design for both go and no go verification
- Designed with a size 5 handle for comfortable and secure operation
- Engineered for accurate thread inspection in industrial applications
MSC GF Gage Truncated Taperlock Thread Gage, 1/2-28 UNEF, Go and No Go, Class 3A, 1 ea
GF Gage Truncated Taperlock Thread Gage, 1/2-28 UNEF, Go and No Go, Class 3A, 1 ea
MSC GF Gage Truncated Taperlock Thread Gage, #5-40 UNC, 2A, Steel, 1 ea.
GF Gage Truncated Taperlock Thread Gage, #5-40 UNC, 2A, Steel, 1 ea.
MSC GF Gage Truncated Taperlock Gage, 1-1/8-7, Class 2A, 1 ea
This truncated taperlock gage is designed for precise measurement of 1-1/8-7 thread specifications. It features a double-ended design, incorporating both Go and No Go members to ensure thread accuracy and quality control in industrial applications.
- Class 2A tolerance
- Double-ended configuration for Go and No Go testing
- Includes a 4 in. handle for secure grip and ease of use
- Truncated thread form