Mills
Grainger Sq. End Mill Single End Carb 7/32
The Micro 100 Square End Mill Center Cutting 14M415 is a square end milling cutter made by Micro 100. It has a 1/4" shank diameter, 1/2" cutter diameter, 2" overall length, and 2 flutes. The end mill is center cutting and made of solid carbide for wear resistance and strength when milling steel, cast iron, aluminum and other non-ferrous metals. It can be run at speeds up to 25,000 RPM. The square shape allows milling of shoulders, slots and angles.
Fritsch Milling And Sizing Inc Sieve Ring P-14 Cl Stainl. Steel 1 mm Trapezoidal Perf.
Sieve ring P-14 cl stainl. steel 1 mm trapezoidal perf.
Sieve rings determine the end fineness of the sample.
Sieve rings with trapezoidal perforations and sieve rings with round perforations are offered.
Sieve rings with trapezoidal perforations improve size reduction through extra shearing action.
Sieve rings with round perforations are recommended for grinding brittle and materials of medium fineness with small grain bands.
Also sieve rings with reinforced edges for heavy duty grinding are offered.
Fritsch Milling And Sizing Inc Sieve Ring P-14 Cl Stainl. Steel 6 mm Round Perforation
Sieve ring P-14 cl stainl. steel 6 mm round perforation
Sieve rings determine the end fineness of the sample.
Sieve rings with round and trapezoidal perforations are offered.
Sieve rings with round perforations are recommended for grinding brittle and materials of medium fineness with small grain bands.
Sieve rings with trapezoidal perforations improve size reduction through extra shearing action.
Sklar Instruments Needle Holder Sklar Microscopy Surgical 1/EA
Needle Holder Sklar Microscopy Surgical 1/EA
Sklar Instruments Needle Holder Sklar Microscopy Surgical 1/EA
Needle Holder Sklar Microscopy Surgical 1/EA
Fritsch Milling And Sizing Inc Movable Jaw P-1 Cl Size 1 Hardmetal Tungsten Carbide
Movable crushing jaw, hardmetal tungsten carbide for PULVERISETTE 1 classic line, Size 1 for the comminution of hard, abrasive samples
General material specifications:
Material: hardmetal tungsten carbide - GC40 - WC
Abrasion resistance: extremely good
Suitable for: hard, abrasive samples
Grainger Ball End Mill Single End 0.30mm Carbide
The Grainger Approved Ball End Mill Single End is a high-speed steel end mill with a ball end for milling contoured surfaces. It has a 1/4" shank diameter, 1/2" overall length, and a 1/4" cutting diameter. The end mill has a TiN coating for increased hardness and lubricity. It is designed for general purpose milling in most material types up to 45 HRC hardness. The end mill provides accurate results for profiling, contouring, slotting, and pocketing applications.
Grainger Thread Mill Carbide
The Micro 100 16R741 is a 1/4" diameter, 3/4" long, 4 flute carbide thread mill. It has a right hand spiral flute design and can cut 60 degree internal threads in steel, stainless steel, cast iron, aluminum, and other materials. The thread mill has AlTiN nano coating for increased tool life and lubricity. It is capable of cutting unified thread sizes from 4-56 to 1/4-20 as well as metric thread sizes from M1x0.25 to M6x1. Recommended speeds are 70 to 120 SFM. Overall, this Micro 100 thread mill provides an efficient method of cutting internal threads in metals.
Grainger Sq. End Mill Single End Carb 3/64
The Grainger 14T279 is a 14-inch diameter, two-blade, aluminum paddle fan with an oil-rubbed bronze finish. It features reversible blades that allow for downdraft and updraft airflow. This fan has an integrated light kit with an opal glass shade and uses an LED bulb. It is damp rated for covered outdoor use. The fan is ENERGY STAR certified for energy efficiency. This 52-inch fan comes with a 4.5 inch downrod, hangs from a standard ceiling mount, and has an integrated pull chain for controlling fan speed and light.