Mills
Grainger Thread Mill Carbide
The Micro 100 16R736 is a 1/4" diameter, 3/4" long, 4 flute carbide thread mill with a right hand spiral flute. It has a TiAlN coating and can cut 60-62 HRC materials. The thread mill has a 1/4"-28 UNF shank and can cut thread sizes from #10-24 through 1/4"-28. It has a neck relief below the thread for improved chip flow. The thread mill is made in the USA and has AlTiN nano coating for heat and wear resistance when cutting steel alloys.
Fritsch Milling And Sizing Inc Fixed Jaw P-1 Pl+Cl Size 2, Mn-Steel
Fixed crushing jaw, manganese steel for PULVERISETTE 1 premium line and classic line Size 2 for the comminution of hard, brittle samples
General material specifications:
Material: manganese steel - 1.3401
Abrasion resistance: good
Suitable for: hard, brittle samples
Fritsch Milling And Sizing Inc Sieve Ring P-14 Cl Stainl. Steel 0.75 mm Trapezoidal Perf.
Sieve ring P-14 cl stainl. steel 0.75 mm trapezoidal perf.
Sieve rings determine the end fineness of the sample.
Sieve rings with trapezoidal and round perforations are offered.
Sieve rings with trapezoidal perforations improve size reduction through extra shearing action.
Sieve rings with round perforations are recommended for grinding brittle and materials of medium fineness with small grain bands.
Also sieve rings with reinforced edges for heavy duty grinding are offered.
Cayman Chemical Precellys 7 mL Soil Grinding
Kit includes 50 preps of a mix of ceramic (zirconium oxide) and glass beads in 7 mL standard tubes with O-ring. SK38 7 mL is designed for micro-organism lysing included in samples like soil, sediment, root, feces, animal or plant tissues and more. Sample size range from 200 mg to 2 g tissue or 200 µL to 6 mL culture. [Bertin Catalog P000936-LYSK0-A.0; Previously KT03961-1-303.7]
Grainger Sq. End Mill Single End Carb 5/64
The Grainger Approved Square End Mill Single End is a high-speed steel end mill with a square end for milling slots, keyways, and pockets. It has four flutes and a right-hand spiral. The overall length is 3 inches and the shank diameter is 0.375 inches. This end mill is uncoated and made in the USA. The maximum RPM is 2700. It can slot to a depth of 1.5 inches in steel and 2 inches in aluminum. This is a good general purpose end mill for light milling applications.
Grainger Sq. End Mill Single End Carb 1/4
The Grainger 14F982 is a Westward brand 1/4-inch drive socket set. This 108-piece socket set includes both SAE and metric sockets ranging from 1/4 inch drive to 3/4 inch drive. The set comes organized in a sturdy plastic case for easy storage and portability. Key features of this socket set include the chrome vanadium steel construction for durability and longevity, a knurled design on the tools for grip, and a comprehensive assortment of the most commonly used socket sizes for automotive and machinery repairs and maintenance. This professional-grade socket set provides versatility and convenience for mechanics.
Grainger Pipe Marker Mill Water 5 in H 8 in W
The Grainger Mill Water Pipe Marker is a durable vinyl label designed for identifying pipes carrying mill water. It has a white background with bold black text reading "MILL WATER" in 2 inch high letters. The label measures 9 inches wide by 12 inches tall for high visibility. It has an aggressive adhesive that adheres well to PVC, iron, steel, and other common pipe materials. The vinyl material is water, chemical, UV, and abrasion resistant for long lasting identification in industrial environments. This pipe marker meets ANSI/OSHA requirements for pipe labeling and identification. It is made in the USA by Grainger, a leading supplier of industrial labels, signs and facility safety products.
Grainger Thread Mill Carbide
The Micro 100 16R654 is a 1/2" diameter, 4 flute, carbide thread mill with a TiAlN coating. It has a right hand cut and can produce unified threads from 4-56 to 1/2-13. The overall length is 3" and it has a 1/2" shank. This thread mill is made of micrograin carbide with a titanium aluminum nitride coating for wear resistance and heat dissipation. It can machine a wide range of materials including steel, stainless steel, cast iron, aluminum, brass, bronze and plastics. The 4 flute design provides efficient chip removal. This thread mill is manufactured in the USA by Micro 100, a leading brand for high performance cutting tools.
Grainger End Mill Kyocera MECX 1000S750077T 1.0
The Kyocera 170HN1 is a 4-flute end mill made of micrograin carbide with a TiAlN coating. It has a 1/2" shank diameter, 1-1/2" overall length, and 1/2" max depth of cut. The end mill has a 30 degree helix angle and is center cutting. It is designed for high feed milling in hardened steels up to 65 HRC, nickel-based alloys, titanium alloys, and other difficult to machine materials. The end mill provides high metal removal rates, long tool life, and excellent surface finishes.
Fritsch Milling And Sizing Inc Grinding Bowl 20Ml Cpl. Hardened,Stainless Steel P-7Pl
Grinding bowl 20ml cpl. hardened,stainless steel P-7pl with lid, seal ring and label
Grinding bowl volume: 20 ml
Useful capacity: 1 … 9 ml
Weight net: 1.150 kg
General material specification:
Material: hardened, stainless steel - Fe-Cr
Abrasion resistance: good
Suitable for: hard, medium-hard, brittle samples
All grinding bowls for the Planetary Micro Mill PULVERISETTE 7 premium line are delivered - as a standard – with a silicone seal ring. Due to this seal ring, the lid and grinding bowl are so tightly sealed that even grinding in suspension is possible absolutely problem-free.
Fritsch Milling And Sizing Inc Sieve Ring P-14 Cl Stainl. Steel 2 mm Round Perforation
Sieve ring P-14 cl stainl. steel 2 mm round perforation
Sieve rings determine the end fineness of the sample.
Sieve rings with round and trapezoidal perforations are offered.
Sieve rings with round perforations are recommended for grinding brittle and materials of medium fineness with small grain bands.
Sieve rings with trapezoidal perforations improve size reduction through extra shearing action.
Revvity Health Sciences Inc HTRF Human Total ATM Detection Kit, 500 Assay Points
HTRF Human Total ATM Detection Kit, 500 Assay Points
Grainger Sq. End Mill Single End Carb 3/64
The Grainger Approved Square End Mill Single End Carbide is a milling cutter with a square end for machining slots, keyways, pockets, and other 90 degree surfaces. It has a 1/2 inch shank diameter, 1 inch cutting diameter, 2 inch overall length, and 2 flutes. The end mill is made of solid carbide for wear resistance and has TiAlN coating for heat resistance and lubricity. It can machine steels, stainless steels, cast iron, aluminum, and other non-ferrous metals at high speeds and feeds. This is a high quality carbide end mill suitable for heavy duty milling applications.