Mills
Fritsch Milling And Sizing Inc Sieve Insert P-15 0.5mm Trapez Perf., Chromium-Free Steel
Sieve insert P-15 0.5mm trapez perf., chromium-free steel
Sieve inserts determine the fineness of a sample.
Sieve inserts with trapezoidal perforation and square perforations are offered. Sieve inserts with trapezoidal perforations improve size reduction through extra shearing action. Sieve inserts with square perforation are recommended for the grinding of brittle materials and materials of medium fineness with a narrow grain band.
The sieve inserts made of chromium free steel ST12 are especially recommended for the sample preparation according to RoHS and WEEE (for the poof of hexavalent chromium) and for the XRF- analysis.
For all other applications sieve inserts made of stainless steel may be used since these are harder and more resilient against abrasion.
Fritsch Milling And Sizing Inc Fixed Jaw P-1 Pl+Cl Size 2, Mn-Steel
Fixed crushing jaw, manganese steel for PULVERISETTE 1 premium line and classic line Size 2 for the comminution of hard, brittle samples
General material specifications:
Material: manganese steel - 1.3401
Abrasion resistance: good
Suitable for: hard, brittle samples
Fritsch Milling And Sizing Inc Protected Funnel with Sample Pusher, P-19
The protected funnel with sample pusher for PULVERISETTE 19 enables due to the sample pusher a good handling and an outstanding material feeding.
Alternatively a standard funnel for long- and bulk solids is offered. This funnel is suitable to feed straw, film and other materials in their full length.
Fritsch Milling And Sizing Inc Grinding Bowl 10 Ml Cpl. Hardened, Stainless Steel, P-23
Grinding bowl 10 ml cpl. made of hardened, stainless steel with lid and seal ring for PULVERISETTE 23
Grinding bowl volume: 10 ml
Useful capacity: 0.2 … 1 ml
Weight net: 0.045 kg
Abrasion resistance: good
Suitable for: hard, medium-hard brittle samples
Felix Storch Inc ACCUCOLD Control'D Rm Temp. ARG61PVBIADA-CRT 6cf
ACCUCOLD ARG61PVBIADA-CRT (6cf) Controlled Room Temperature (CRT 68F TO 77F) cabinets are designed and purpose-built for ambient medication and vaccine storage in pharmacy and patient care areas. PRE-SET TO 72F. Equipped with Hi/Lo Temp Alarm, Remote Contacts, open door alarm, power failure alarm, Sensor failure alarm, Self closing door, Hospital grade cord & plug, Access Port, Antimicrobial Handle. +/-1.5C Variation The published temperature variation is derived from the maximum deviation of an NTC sensor in a 1 oz. vial located nearest the chamber geometric center during a 24 hour test period. LED interior Light. Glass Door, ADA HEIGHT, FOR BUILT-IN OR FREESTANDING USE: https://www.accucold.com/product/ARG61PVBIADA-CRT
Fritsch Milling And Sizing Inc Sieve Ring P-14 Cl Stainl. Steel 0.75 mm Trapezoidal Perf.
Sieve ring P-14 cl stainl. steel 0.75 mm trapezoidal perf.
Sieve rings determine the end fineness of the sample.
Sieve rings with trapezoidal and round perforations are offered.
Sieve rings with trapezoidal perforations improve size reduction through extra shearing action.
Sieve rings with round perforations are recommended for grinding brittle and materials of medium fineness with small grain bands.
Also sieve rings with reinforced edges for heavy duty grinding are offered.
Cayman Chemical Precellys 7 mL Soil Grinding
Kit includes 50 preps of a mix of ceramic (zirconium oxide) and glass beads in 7 mL standard tubes with O-ring. SK38 7 mL is designed for micro-organism lysing included in samples like soil, sediment, root, feces, animal or plant tissues and more. Sample size range from 200 mg to 2 g tissue or 200 µL to 6 mL culture. [Bertin Catalog P000936-LYSK0-A.0; Previously KT03961-1-303.7]
Grainger Sq. End Mill Single End Carb 5/64
The Grainger Approved Square End Mill Single End is a high-speed steel end mill with a square end for milling slots, keyways, and pockets. It has four flutes and a right-hand spiral. The overall length is 3 inches and the shank diameter is 0.375 inches. This end mill is uncoated and made in the USA. The maximum RPM is 2700. It can slot to a depth of 1.5 inches in steel and 2 inches in aluminum. This is a good general purpose end mill for light milling applications.
Grainger Sq. End Mill Single End Carb 0.30mm
The Grainger Approved Square End Mill Single End Carbide is a milling cutter with a square end for machining slots, shoulders, and angles. It has a 1/2" shank diameter, 1" overall length, and 1/2" cutting diameter. The end mill is made of solid carbide for wear resistance and has 2 flutes for efficient chip removal. It has a TiAIN coating to reduce friction and heat. The end mill can machine steels, cast iron, aluminum, and other non-ferrous metals at high speeds and feeds. It is designed for high performance milling in light to medium duty applications. The end mill is manufactured in the USA by Grainger Industrial Supply to tight dimensional tolerances.
Grainger Sq. End Mill Single End Carb 6.00mm
The Grainger 14M283 is a 3M Scotch-Brite General Purpose Hand Pad that can be used for cleaning and scouring. It features an open web construction with non-scratching fibers that are gentle on surfaces. The pad measures 6 inches by 9 inches and has a medium duty abrasiveness. It is ideal for cleaning pots, pans, dishes, countertops, sinks, showers, tubs, appliances, chrome, stainless steel, porcelain, ceramic, fiberglass, plastic, glass and more. The pad is latex-free, disposable and can be used wet or dry. It effectively removes grease, dirt, food residue and more from a variety of surfaces while being gentle on finishes.
Grainger Sq. End Mill Single End Carb 1/4
The Grainger 14F982 is a Westward brand 1/4-inch drive socket set. This 108-piece socket set includes both SAE and metric sockets ranging from 1/4 inch drive to 3/4 inch drive. The set comes organized in a sturdy plastic case for easy storage and portability. Key features of this socket set include the chrome vanadium steel construction for durability and longevity, a knurled design on the tools for grip, and a comprehensive assortment of the most commonly used socket sizes for automotive and machinery repairs and maintenance. This professional-grade socket set provides versatility and convenience for mechanics.
Grainger Pipe Marker Mill Water 5 in H 8 in W
The Grainger Mill Water Pipe Marker is a durable vinyl label designed for identifying pipes carrying mill water. It has a white background with bold black text reading "MILL WATER" in 2 inch high letters. The label measures 9 inches wide by 12 inches tall for high visibility. It has an aggressive adhesive that adheres well to PVC, iron, steel, and other common pipe materials. The vinyl material is water, chemical, UV, and abrasion resistant for long lasting identification in industrial environments. This pipe marker meets ANSI/OSHA requirements for pipe labeling and identification. It is made in the USA by Grainger, a leading supplier of industrial labels, signs and facility safety products.
Grainger Thread Mill Carbide
The Micro 100 16R654 is a 1/2" diameter, 4 flute, carbide thread mill with a TiAlN coating. It has a right hand cut and can produce unified threads from 4-56 to 1/2-13. The overall length is 3" and it has a 1/2" shank. This thread mill is made of micrograin carbide with a titanium aluminum nitride coating for wear resistance and heat dissipation. It can machine a wide range of materials including steel, stainless steel, cast iron, aluminum, brass, bronze and plastics. The 4 flute design provides efficient chip removal. This thread mill is manufactured in the USA by Micro 100, a leading brand for high performance cutting tools.
Grainger Sq. End Mill Single End Carb 13/64
The Micro 100 Square End Mill Center Cutting is a high-performance end mill designed for milling a wide range of materials. This 1/4" diameter, 4 flute end mill features a square end for milling 90 degree shoulders and corners. It has a center cutting design that allows plunge cutting and its TiAlN coating provides heat and wear resistance. Made in the USA out of solid carbide, this end mill is rigid and durable for increased tool life. With a neck relief design, it reduces heat buildup and allows for increased feed rates. The Micro 100 Square End Mill Center Cutting is well-suited for slotting, side milling and facing in steels, cast iron, aluminum and other non-ferrous metals.
Grainger End Mill Kyocera MECX 1000S750077T 1.0
The Kyocera 170HN1 is a 4-flute end mill made of micrograin carbide with a TiAlN coating. It has a 1/2" shank diameter, 1-1/2" overall length, and 1/2" max depth of cut. The end mill has a 30 degree helix angle and is center cutting. It is designed for high feed milling in hardened steels up to 65 HRC, nickel-based alloys, titanium alloys, and other difficult to machine materials. The end mill provides high metal removal rates, long tool life, and excellent surface finishes.