Embedding Accessories
Electron Microscopy Sciences T-Sue™ Microarray Mold Kit, 1 mm
T-Sue array molds are specifically designed to be simple, easy to use and inexpensive. The tissues can be analyzed in consistent conditions enhancing the efficiency of the research. Allow you to perform TMAs more quickly with excellent results. By using array molds, you can process up to 170 specimens onto one single slide in very little time.
Made of silicone, these molds can withstand temperatures between -100 deg C to +250 deg C and be reused hundreds of times without losing their flexibility.
Each kit includes one T-Sue array mold and four punch needles with stylet.
Size: 1 mm
Capacity: 170 cores
Electron Microscopy Sciences T-Sue™ Precast Paraffin Block, 1.5 mm
Precast T-Sue Microarray paraffin blocks are used to construct a tissue array block in minutes by simply punching the donor tissue cores and inserting into a pre-made paraffin recipient block. It is an easy, convenient, and low cost method for constructing paraffin tissue microarrays. The blocks are made of paraffin and the cassettes are made of acetal. The cassette is permanently bonded to the block and has consistent core diameters. It is ready to accept cores from the donor block.
Kit includes 6 Precast T-Sue Paraffin blocks and two punch needles with stylet.
Size: 1.5 mm
Capacity: 72 cores
Electron Microscopy Sciences Biopsy Paper Filters, Black
Specifically designed for processing biopsy specimens. Non-absorbent mesh allows fluids to flow through freely while containing small tissue fragments. Non-absorbent porous mesh prevents reagent carryover. They eliminate the indentation pattern left by form biopsy pads. Can be easily opened with tweezers. Allows efficient solvent flow-through during processing.
Color: Black
Electron Microscopy Sciences Chien Universal-Mold
A two-directional mold that allows for single embedded specimens to be sectioned both laterally and transversely . Tissues to be embedded are accurately trimmed and placed so that both sides of the tissue are against both edges of the cavity tip. See Chien, K., et al. (1985) Proc. Ann. EMSA Meeting 43, 460
Electron Microscopy Sciences Easy-Molds™ for size 3 Capsules, 5.6 mm diameter
A newly designed mold which is convenient and offers better embedments. This tray-and-mold in one unit offers a unique specimen block that no other mold can. Each tray contains 2x10 block molds and measures 87x66 mm. Size: 5.6mm diameter corresponds to capsules size 3, and forms a block face of 1.6mm.
Electron Microscopy Sciences Embedding Block 1, 19x19x19 mm
These embedding blocks are precisely machined from hard phenolic resin. The faces of the embedding blocks are cut very deeply providing a firm hold of the embedded specimen. Suitable for cellodin or paraffin sections.
Size: 19 x 19 x 19 mm
Electron Microscopy Sciences Embedding Ring, White
Molded from the highest quality plastic, our Embedding Rings fit most base molds. The large writing surface further eases identification and handling. The base measures 1 5/8" x 1 1/8" and the ring measures 1" x 1" (25 x 25 mm).
Electron Microscopy Sciences Easy-Molds™ for size 3 Capsules, 5.6 mm diameter
A newly designed mold which is convenient and offers better embedments. This tray-and-mold in one unit offers a unique specimen block that no other mold can. Each tray contains 2x10 block molds and measures 87x66 mm. Size: 5.6mm diameter corresponds to capsules size 3, and forms a block face of 1.6mm.
Electron Microscopy Sciences Easy-Load Cover for Biopsy Cassettes, Green
One-piece disposable plastic, it can be opened and closed as often as necessary and it always relocks securely without danger of specimen loss.
Color: Green
Electron Microscopy Sciences Disposable Base Mold for Macrocassettes
Made from PVC with excellent thermal exchange. Specially designed for the Macro-Cassette above. It has a smooth interior finish and rounded corners to facilitate its removal. Will resist temperatures from –80 degree C to 60 degree C. Not to be used with xylene or acetone. Measures: 37 x 24 x 10 mm, and 5 ml volume.
Electron Microscopy Sciences Nylon Biopsy Bag, 98 x 75 mm
Biopsy bags made from nylon cloth, 0.2 mm mesh diameter. All seams are heat-sealed. Allows for unrestricted fluid movement around the tissue. Reduces the loss of small biopsy specimens. Reduces cross contamination and pressure artifacts by using sponges.
Size: 98 x 75 mm
Electron Microscopy Sciences Nylon Biopsy Bag, 35 x 50 mm
Biopsy bags made from nylon cloth, 0.2 mm mesh diameter. All seams are heat-sealed. Allows for unrestricted fluid movement around the tissue. Reduces the loss of small biopsy specimens. Reduces cross contamination and pressure artifacts by using sponges.
Size: 35 x 50 mm
Med Vet International Base Mold, 24X24X5mm, 12pcs/pkg
These reusable stainless steel base molds are for use in histology for biopsy. They have extended sides to prevent tipping, provide a great gripping surface for better handling, and to fit with our embedding cassettes for holding paraffin and tissue samples. These molds are available in five different sizes for various uses.
Med Vet International Base Mold, 30X24X5mm, 12pcs/pkg
These reusable stainless steel base molds are for use in histology for biopsy. They have extended sides to prevent tipping, provide a great gripping surface for better handling, and to fit with our embedding cassettes for holding paraffin and tissue samples. These molds are available in five different sizes for various uses.